The 10 most recently published documents
Semiconductor multilayer and device fabrication is a complex task in electronics and opto-electronics. Layer dry etching is one of the process steps to achieve a specific lateral device design. In situ and real-time monitoring of etch depth will be necessary if high precision in etch depth is required. Nondestructive optical techniques are the methods of choice. Reflectance anisotropy spectroscopy equipment has been used to monitor the accurate etch depth during reactive ion etching of III/V semiconductor samples in situ and real time. For this purpose, temporal Fabry–Perot oscillations due to the etch-related shrinking thickness of the uppermost layer have been exploited. Earlier, we have already reported an etch-depth resolution of ±16.0 nm. By the use of a quadruple-Vernier-scale measurement and an evaluation protocol, now we even improve the in situ real-time etch-depth resolution by a factor of 20, i.e., nominally down to ±0.8 nm.
Magnonics attracts increasing attention in the view of low-energy computation technologies based on spin waves. Recently, spin-wave propagation in longitudinally magnetized nano-scaled spin-wave conduits was demonstrated, proving the fundamental feasibility of magnonics at the sub-100 nm scale. Transversely magnetized nano-conduits, which are of great interest in this regard as they offer a large group velocity and a potentially chirality-based protected transport of energy, have not yet been investigated due to their complex internal magnetic field distribution. Here, we present a study of propagating spin waves in a transversely magnetized nanoscopic yttrium iron garnet conduit of 50 nm width. Space and time-resolved microfocused Brillouin-light-scattering spectroscopy is employed to measure the spin-wave group velocity and decay length. A long-range spin-wave propagation is observed with a decay length of up to (8.0 ± 1.5) μm and a large spin-wave lifetime of up to (44.7 ± 9.1) ns. The results are supported with micromagnetic simulations, revealing a broad single-mode frequency range and the absence of a mode localized to the edges. Furthermore, a frequency nonreciprocity for counter-propagating spin waves is observed in the simulations and the experiment, caused by the trapezoidal cross section of the structure. The revealed long-distance spin-wave propagation on the nano-scale is particularly interesting for an application in spin-wave devices, allowing for long-distance transport of information in magnonic circuits and low-energy device architectures.
Examination of laminar Couette flow with obstacles by a low-cost particle image velocimetry setup
(2021)
For many technical applications, a detailed analysis of the fluid mechanical properties is necessary, for which computational fluid dynamics (CFD) simulations are used. However, even though flow simulations are becoming faster and more accurate, validation through experimentation is essential. One way of validation is to use Particle Image Velocimetry (PIV), an imaging technique that can visualize the flow field and measure flow velocities. Since the measuring equipment of commercial systems is very expensive, we propose a low-cost PIV setup that is also affordable for small scientific institutions. In addition to the quality of the acquired images, the reliability and comparability between experiment and simulation are also important issues. Therefore, in this work, we compare the image acquisition quality of the proposed low-cost PIV system with two- and three-dimensional CFD simulations for a laminar Couette flow and a laminar flow around square and hexagonal obstacles with very good agreement. In addition, we analyzed the transferability of 2D and 3D CFD simulations with experiments by measuring the velocity field and found that experimentally determined flow velocities often cannot be used to validate idealized (2D) simulations due to the spatial flow that occurs. However, if the non-ideal conditions of the experiment are considered in the (3D) simulation, a good comparability is given and an experimental validation is possible, for which the presented low-cost PIV system is well suitable.
In situ condition monitoring of rotary shaft seals could significantly improve the reliability of future seals in numerous applications. A superficial application of strain gauges capturing the state of deformation could offer a cost-effective retrofit solution for indirect measurements of central operational parameters. Within a simulative investigation of the sealing system, possible sensor positions for determination of the preload as well as the friction torque prevailing in the sealing contact are therefore identified as two parameters directly related to the operating condition. Further investigations of the potential sensor signal with focus on its time-dependent behavior prove the theoretical feasibility of the measurement concepts developed and provide promising prospects for an initial technical implementation.
A building's indoor climate is an essential input variable for a variety of building physics computational models, simulations, and analyses. Precise knowledge of the indoor climate is necessary to minimize the risk of mold or moisture damage and is required to ensure minimum heat insulation standards in buildings. Detailed data are especially necessary for the progressive application of transient calculations, for example, concerning thermal comfort or energy consumption. While the properties of building materials and the (local) outdoor climate are known, only rudimentary information about the dynamic indoor climate is available. Most existing information in the literature about indoor climate is fairly general and forgoes a differentiation between climatic region, occupancy profile, and the utilization of rooms. In this paper, we report on indoor climate measurements in naturally ventilated apartments over a period of 1 year. The measurement results complement the existing data to provide accurate indoor climate data in buildings. The measured values of indoor temperature and relative humidity serve to derive the dew point temperature and moisture load whereby dynamic time-dependent regression functions are determined for these parameters. The evaluations are carried out separately according to room use. The comparison of living rooms and bedrooms indicates a great influence of room use on the indoor climate in residential buildings. The determined indoor climate model can be used for the planning of buildings and simulations. The classification into living rooms and bedrooms makes it possible to take user behavior into account more realistically in building physics simulations. The minimum thermal insulation in residential buildings can also be checked and designed based on realistic data. The prediction interval describes the limits in which residential rooms are free of damage with a high probability. In this way, the indoor climate model describes an approach to examine and evaluate simulation results regarding condensation risk and mold damage in naturally ventilated rooms.
Magnetic heterostructures consisting of single-crystal yttrium iron garnet (YIG) films coated with platinum are widely used in spin-wave experiments related to spintronic phenomena such as the spin-transfer-torque, spin-Hall, and spin-Seebeck effects. However, spin waves in YIG/Pt bilayers experience much stronger attenuation than in bare YIG films. For micrometer-thick YIG films, this effect is caused by microwave eddy currents in the Pt layer. This paper reports that by employing an excitation configuration in which the YIG film faces the metal plate of the microstrip antenna structure, the eddy currents in Pt are shunted and the transmission of the Damon–Eschbach surface spin wave is greatly improved. The reduction in spin-wave attenuation persists even when the Pt coating is separated from the ground plate by a thin dielectric layer. This makes the proposed excitation configuration suitable for injection of an electric current into the Pt layer and thus for application in spintronics devices. The theoretical analysis carried out within the framework of the electrodynamic approach reveals how the platinum nanolayer and the nearby highly conductive metal plate affect the group velocity and the lifetime of the Damon–Eshbach surface wave and how these two wavelength-dependent quantities determine the transmission characteristics of the spin-wave device.
A novel core–shell species for the adsorption-based separation of carbon dioxide (CO2) from methane (CH4) is introduced by hydrothermal synthesis of Ni-MOF-74 on mesoporous spherical Al2O3 carrier substrate. The material was characterized and the shell thickness determined by means of optical and scanning electron microscopy as well as volumetric adsorption and fluid displacement experiments. Kinetic experiments with Ni-MOF-74@Al2O3 core–shell composites carried out at 303.15 K and at pressures up to 10 bar expose remarkably dominating uptake rates for CO2 over CH4. In the contrary Ni-MOF-74@Al2O3 appears to be unselective according to equilibrium data at the same conditions. Dynamic breakthrough experiments of binary CH4/CO2-mixtures (at 303.15 K and 5 bar) prove the prevailing effect of adsorption kinetics and the storage function of the mesoporous core. This statement is supported by a considerable boost in CO2-selectivity and capacity compared to adsorption equilibria measured on pure Ni-MOF-74 by the factor of 55.02 and up to 2.42, respectively.
Surface wetting can be simulated using a phase field approach which describes the continuous liquid-gas transition with the help of an order parameter. In this publication, wetting of non-planar surfaces is investigated based on a phase field model by Diewald et al. [1, 2]. Different scenarios of droplets on rough surfaces are simulated. The static equilibrium for those scenarios is calculated using an Allen-Cahn evolution equation. The influence of the surface morphology on the resulting contact angle is investigated while the width of the phase transition from liquid to gas is varied as a model parameter.
The great flexibility of direct laser writing (DLW) arises from the possibility to fabricate precise three-dimensional structures on very small scales as well as the broad range of applicable materials. However, there is still a vast number of promising materials, which are currently inaccessible requiring the continuous development of novel photoresists. Herein, a new bio-sourced resist is reported that uses the monomeric unit of chitin, N-acetyl-D-glucosamine, paving the way from existing hydrogel resists based on animal carbohydrates to a new class of non-hydrogel ones. In addition, it is shown that the combined use of two photoinitiators is advantageous over the use of a single one. In this approach, the first photoinitiator is a good two-photon absorber at the applied wavelength, while the second photoinitiator exhibits poor two-photon absorbtion abilities, but is better suited for cross-linking of the monomer. The first photoinitiator absorbs the light acting as a sensitizer and transfers the energy to the second initiator, which subsequently forms a radical and initializes the polymerization. This sensitization effect enables a new route to utilize reactive photointiators with a small two-photon absorption cross section for DLW without changing their chemical structure.
Starting from [(η5-cyclopentadienyl)(η6-phenyl)iron(II)]imidazole, dicationic imidazolium salts were prepared by N-alkylation. Reaction of these compounds with basic metal precursors such as mesityl copper(I) or palladium(II) acetate led to mono respectively dicationic transition metal NHC complexes (NHC=N-heterocyclic carbene). Transmetalation using the copper(I) complexes opened up the access to NHC gold(I) compounds. PEPPSI-type NHC complexes of palladium(II) and platinum(II) were prepared by offering a neutral pyridine ligand to the transition metal center. A rhodium(I) NHC complex was accessible by deprotonation of the dicationic imidazolium precursor and subsequent treatment with [(COD)Rh(μ2-Cl)]2 (COD=1,5-cyclooctadiene). The new NHC complexes were investigated by means of NMR spectroscopy, mass spectrometry as well as single crystal X-ray structure analysis. Both, the palladium(II) containing PEPPSI-type and the gold(I) complex, were investigated for their catalytic properties in typical model reactions such as cyclization reactions, Suzuki coupling and cyanation. In addition, a selenium adduct was synthesized in order to study the electronic properties of the underlying ligand backbone. Based on the chemical shift in the 77Se NMR spectrum, it is evident that these NHC ligands possess rather poor π-acidity.