35B27 Homogenization; equations in media with periodic structure [See also 74Qxx, 76M50]
Refine
Document Type
- Doctoral Thesis (3)
Language
- English (3)
Has Fulltext
- yes (3)
Keywords
Faculty / Organisational entity
This work aims to study textile structures in the frame of linear elasticity to understand how
the structure and material parameters influence the macroscopic homogenized model. More
precisely, we are interested in how the textile design parameters, such as the ratio between
fibers’ distance and cross-section width, the strength of the contact sliding between yarns,
and the partial clamp on the textile boundaries determine the phenomena that one can see in
shear experiments with textiles. Among others, when the warp and weft yarns change their
in-plane angles first and, after reaching some critical shear angle, the textile plate comes out
of the plane, and its folding starts.
The textile structure under consideration is a woven square, partially clamped on the left
and bottom boundary, made of long thin fibers that cross each other in a periodic pattern.
The fibers cannot penetrate each other, and in-plane sliding is allowed. This last assumption,
together with the partial clamp, adds new levels of complexity to the problem due to
the anisotropy in the yarn’s behavior in the unclamped subdomains of the textile.
The limiting behavior and macroscopic strain fields are found by passing to the limit with
respect to the yarn’s thickness r and the distance between them e, parameters that are asymptotically
related. The homogenization and dimension reduction are done via the unfolding
method, which separates the macroscopic scale from the periodicity cell. In addition to the
homogenization, a dimension reduction from a 3D to a 2D problem is applied. Adapting
the classical unfolding results to both the anisotropic context and to lattice grids (which are
constructed starting from the center lines of the rods crossing each other) are the main tools
we developed to tackle this type of model. They represent the first part of the thesis and are
published in Falconi, Griso, and Orlik, 2022b and Falconi, Griso, and Orlik, 2022a.
Given the parameters mentioned above, we then proceed to classify different textile problems,
incorporating the results from other works on the topic and thoroughly investigating
some others. After the study is conducted, we draw conclusions and give a mathematical
explanation concerning the expected approximation of the displacements, the expected solvability
of the limit problems, and the phenomena mentioned above. The results can be found
in “Asymptotic behavior for textiles with loose contact”, which has been recently submitted.
In this thesis one considers the periodic homogenization of a linearly coupled magneto-elastic model problem and focuses on the derivation of spectral methods to solve the obtained unit cell problem afterwards. In the beginning, the equations of linear elasticity and magnetism are presented together with the physical quantities used within. After specifying the model assumptions, the system of partial differential equations is rewritten in a weak form for which the existence and uniqueness of solutions is discussed. The model problem then undergoes a homogenization process where the original problem is approximated by a substitute problem with a repeating micro-structural geometry that was generated from a representative volume element (RVE). The following separation of scales, which can be achieved either by an asymptotic expansion or through a two-scale limit process, yields the homogenized problem on the macroscopic scale and the periodic unit cell problem. The latter is further analyzed using Fourier series, leading to periodic Lippmann-Schwinger type equations allowing for the development of matrix-free solvers. It is shown that, while it is possible to craft a scheme for the coupled problem from the purely elastic and magnetic Lippmann-Schwinger equations alone without much additional effort, a more general setting is provided when deriving a Lippmann-Schwinger equation for the coupled system directly. These numerical approaches are then validated with some analytically solvable test problems, before their performance is tested against each other for some more complex examples.
The aim of the thesis is the numerical investigation of saturated, stationary, incompressible Newtonian flow in porous media when inertia is not negligible. We focus our attention to the Navier-Stokes system with two pressures derived by two-scale homogenization. The thesis is subdivided into five Chapters. After the introductory remarks on porous media, filtration laws and upscaling methods, the first chapter is closed by stating the basic terminology and mathematical fundamentals. In Chapter 2, we start by formulating the Navier-Stokes equations on a periodic porous medium. By two-scale expansions of the velocity and pressure, we formally derive the Navier-Stokes system with two pressures. For the sake of completeness, known existence and uniqueness results are repeated and a convergence proof is given. Finally, we consider Stokes and Navier-Stokes systems with two pressures with respect to their relation to Darcy's law. Chapter 3 and Chapter 4 are devoted to the numerical solution of the nonlinear two pressure system. Therefore, we follow two approaches. The first approach which is developed in Chapter 3 is based on a splitting of the Navier-Stokes system with two pressures into micro and macro problems. The splitting is achieved by Taylor expanding the permeability function or by discretely computing the permeability function. The problems to be solved are a series of Stokes and Navier-Stokes problems on the periodicity cell. The Stokes problems are solved by an Uzawa conjugate gradient method. The Navier-Stokes equations are linearized by a least-squares conjugate gradient method, which leads to the solution of a sequence of Stokes problems. The macro problem consists of solving a nonlinear uniformly elliptic equation of second order. The least-squares linearization is applied to the macro problem leading to a sequence of Poisson problems. All equations will be discretized by finite elements. Numerical results are presented at the end of Chapter 3. The second approach presented in Chapter 4 relies on the variational formulation in a certain Hilbert space setting of the Navier-Stokes system with two pressures. The nonlinear problem is again linearized by the least-squares conjugate gradient method. We obtain a sequence of Stokes systems with two pressures. For the latter systems, we propose a fast solution method which relies on pre-computing Stokes systems on the periodicity cell for finite element basis functions acting as right hand sides. Finally, numerical results are discussed. In Chapter 5 we are concerned with modeling and simulation of the pressing section of a paper machine. We state a two-dimensional model of a press nip which takes into account elasticity and flow phenomena. Nonlinear filtration laws are incorporated into the flow model. We present a numerical solution algorithm and the chapter is closed by a numerical investigation of the model with special focus on inertia effects.