Impact of the thermomechanical load on subsurface phase transformations during cryogenic turning of metastable austenitic steels
- When machining metastable austenitic stainless steel with cryogenic cooling, a deformation-induced phase transformation from γ-austenite to α′-martensite can be realized in the workpiece subsurface. This leads to a higher microhardness and thus improved fatigue and wear resistance. A parametric and a non-parametric model were developed in order to investigate the correlation between the thermomechanical load in the workpiece subsurface and the resulting α′-martensite content. It was demonstrated that increasing passive forces and cutting forces promoted the deformation-induced phase transformation, while increasing temperatures had an inhibiting effect. The feed force had no significant influence on the α′-martensite content. With the proposed models it is now possible to estimate the α′-martensite content during cryogenic turning by means of in-situ measurement of process forces and temperatures.
Verfasser*innenangaben: | Hendrik HotzORCiD, Benjamin Kirsch, Jan C. Aurich |
---|---|
URN: | urn:nbn:de:hbz:386-kluedo-77844 |
DOI: | https://doi.org/10.1007/s10845-020-01626-6 |
ISSN: | 1572-8145 |
Titel des übergeordneten Werkes (Englisch): | Journal of Intelligent Manufacturing |
Verlag: | Springer Nature - Springer |
Dokumentart: | Wissenschaftlicher Artikel |
Sprache der Veröffentlichung: | Englisch |
Datum der Veröffentlichung (online): | 07.03.2024 |
Jahr der Erstveröffentlichung: | 2020 |
Veröffentlichende Institution: | Rheinland-Pfälzische Technische Universität Kaiserslautern-Landau |
Datum der Publikation (Server): | 07.03.2024 |
Ausgabe / Heft: | 32 |
Seitenzahl: | 18 |
Erste Seite: | 877 |
Letzte Seite: | 894 |
Quelle: | https://link.springer.com/article/10.1007/s10845-020-01626-6 |
Fachbereiche / Organisatorische Einheiten: | Kaiserslautern - Fachbereich Maschinenbau und Verfahrenstechnik |
DDC-Sachgruppen: | 6 Technik, Medizin, angewandte Wissenschaften / 620 Ingenieurwissenschaften und Maschinenbau |
Sammlungen: | Open-Access-Publikationsfonds |
Lizenz (Deutsch): | Zweitveröffentlichung |