## Dissertation

### Filtern

#### Fachbereich / Organisatorische Einheit

- Fraunhofer (ITWM) (4) (entfernen)

#### Dokumenttyp

- Dissertation (4) (entfernen)

#### Sprache

- Englisch (4) (entfernen)

#### Schlagworte

- fatigue (1)
- optimization (1)

- Upscaling Approaches for Nonlinear Processes in Lithium-Ion Batteries (2015)
- Lithium-ion batteries are broadly used nowadays in all kinds of portable electronics, such as laptops, cell phones, tablets, e-book readers, digital cameras, etc. They are preferred to other types of rechargeable batteries due to their superior characteristics, such as light weight and high energy density, no memory effect, and a big number of charge/discharge cycles. The high demand and applicability of Li-ion batteries naturally give rise to the unceasing necessity of developing better batteries in terms of performance and lifetime. The aim of the mathematical modelling of Li-ion batteries is to help engineers test different battery configurations and electrode materials faster and cheaper. Lithium-ion batteries are multiscale systems. A typical Li-ion battery consists of multiple connected electrochemical battery cells. Each cell has two electrodes - anode and cathode, as well as a separator between them that prevents a short circuit. Both electrodes have porous structure composed of two phases - solid and electrolyte. We call macroscale the lengthscale of the whole electrode and microscale - the lengthscale at which we can distinguish the complex porous structure of the electrodes. We start from a Li-ion battery model derived on the microscale. The model is based on nonlinear diffusion type of equations for the transport of Lithium ions and charges in the electrolyte and in the active material. Electrochemical reactions on the solid-electrolyte interface couple the two phases. The interface kinetics is modelled by the highly nonlinear Butler-Volmer interface conditions. Direct numerical simulations with standard methods, such as the Finite Element Method or Finite Volume Method, lead to ill-conditioned problems with a huge number of degrees of freedom which are difficult to solve. Therefore, the aim of this work is to derive upscaled models on the lengthscale of the whole electrode so that we do not have to resolve all the small-scale features of the porous microstructure thus reducing the computational time and cost. We do this by applying two different upscaling techniques - the Asymptotic Homogenization Method and the Multiscale Finite Element Method (MsFEM). We consider the electrolyte and the solid as two self-complementary perforated domains and we exploit this idea with both upscaling methods. The first method is restricted only to periodic media and periodically oscillating solutions while the second method can be applied to randomly oscillating solutions and is based on the Finite Element Method framework. We apply the Asymptotic Homogenization Method to derive a coupled macro-micro upscaled model under the assumption of periodic electrode microstructure. A crucial step in the homogenization procedure is the upscaling of the Butler-Volmer interface conditions. We rigorously determine the asymptotic order of the interface exchange current densities and we perform a comprehensive numerical study in order to validate the derived homogenized Li-ion battery model. In order to upscale the microscale battery problem in the case of random electrode microstructure we apply the MsFEM, extended to problems in perforated domains with Neumann boundary conditions on the holes. We conduct a detailed numerical investigation of the proposed algorithm and we show numerical convergence of the method that we design. We also apply the developed technique to a simplified two-dimensional Li-ion battery problem and we show numerical convergence of the solution obtained with the MsFEM to the reference microscale one.

- Simulation of Degradation Processes in Lithium-Ion Batteries (2015)
- Lithium-ion batteries are increasingly becoming an ubiquitous part of our everyday life - they are present in mobile phones, laptops, tools, cars, etc. However, there are still many concerns about their longevity and their safety. In this work we focus on the simulation of several degradation mechanisms on the microscopic scale, where one can resolve the active materials inside the electrodes of the lithium-ion batteries as porous structures. We mainly study two aspects - heat generation and mechanical stress. For the former we consider an electrochemical non-isothermal model on the spatially resolved porous scale to observe the temperature increase inside a battery cell, as well as to observe the individual heat sources to assess their contributions to the total heat generation. As a result from our experiments, we determined that the temperature has very small spatial variance for our test cases and thus allows for an ODE formulation of the heat equation. The second aspect that we consider is the generation of mechanical stress as a result of the insertion of lithium ions in the electrode materials. We study two approaches - using small strain models and finite strain models. For the small strain models, the initial geometry and the current geometry coincide. The model considers a diffusion equation for the lithium ions and equilibrium equation for the mechanical stress. First, we test a single perforated cylindrical particle using different boundary conditions for the displacement and with Neumann boundary conditions for the diffusion equation. We also test for cylindrical particles, but with boundary conditions for the diffusion equation in the electrodes coming from an isothermal electrochemical model for the whole battery cell. For the finite strain models we take in consideration the deformation of the initial geometry as a result of the intercalation and the mechanical stress. We compare two elastic models to study the sensitivity of the predicted elastic behavior on the specific model used. We also consider a softening of the active material dependent on the concentration of the lithium ions and using data for silicon electrodes. We recover the general behavior of the stress from known physical experiments. Some models, like the mechanical models we use, depend on the local values of the concentration to predict the mechanical stress. In that sense we perform a short comparative study between the Finite Element Method with tetrahedral elements and the Finite Volume Method with voxel volumes for an isothermal electrochemical model. The spatial discretizations of the PDEs are done using the Finite Element Method. For some models we have discontinuous quantities where we adapt the FEM accordingly. The time derivatives are discretized using the implicit Backward Euler method. The nonlinear systems are linearized using the Newton method. All of the discretized models are implemented in a C++ framework developed during the thesis.

- Image based characterization and geometric modeling of 3d materials microstructures (2015)
- It is well known that the structure at a microscopic point of view strongly influences the macroscopic properties of materials. Moreover, the advancement in imaging technologies allows to capture the complexity of the structures at always decreasing scales. Therefore, more sophisticated image analysis techniques are needed. This thesis provides tools to geometrically characterize different types of three-dimensional structures with applications to industrial production and to materials science. Our goal is to enhance methods that allow the extraction of geometric features from images and the automatic processing of the information. In particular, we investigate which characteristics are sufficient and necessary to infer the desired information, such as particles classification for technical cleanliness and fitting of stochastic models in materials science. In the production line of automotive industry, dirt particles collect on the surface of mechanical components. Residual dirt might reduce the performance and durability of assembled products. Geometric characterization of these particles allows to identify their potential danger. While the current standards are based on 2d microscopic images, we extend the characterization to 3d. In particular, we provide a collection of parameters that exhaustively describe size and shape of three-dimensional objects and can be efficiently estimated from binary images. Furthermore, we show that only a few features are sufficient to classify particles according to the standards of technical cleanliness. In the context of materials science, we consider two types of microstructures: fiber systems and foams. Stochastic geometry grants the fundamentals for versatile models able to encompass the geometry observed in the samples. To allow automatic model fitting, we need rules stating which parameters of the model yield the best-fitting characteristics. However, the validity of such rules strongly depends on the properties of the structures and on the choice of the model. For instance, isotropic orientation distribution yields the best theoretical results for Boolean models and Poisson processes of cylinders with circular cross sections. Nevertheless, fiber systems in composites are often anisotropic. Starting from analytical results from the literature, we derive formulae for anisotropic Poisson processes of cylinders with polygonal cross sections that can be directly used in applications. We apply this procedure to a sample of medium density fiber board. Even if image resolution does not allow to estimate reliably characteristics of the singles fibers, we can fit Boolean models and Poisson cylinder processes. In particular, we show the complete model fitting and validation procedure with cylinders with circular and squared cross sections. Different problems arise when modeling cellular materials. Motivated by the physics of foams, random Laguerre tessellations are a good choice to model the pore system of foams. Considering tessellations generated by systems of non-overlapping spheres allows to control the cell size distribution, but yields the loss of an analytical description of the model. Nevertheless, automatic model fitting can still be obtained by approximating the characteristics of the tessellation depending on the parameters of the model. We investigate how to improve the choice of the model parameters. Angles between facets and between edges were never considered so far. We show that the distributions of angles in Laguerre tessellations depend on the model parameters. Thus, including the moments of the angles still allows automatic model fitting. Moreover, we propose an algorithm to estimate angles from images of real foams. We observe that angles are matched well in random Laguerre tessellations also when they are not employed to choose the model parameters. Then, we concentrate on the edge length distribution. In Laguerre tessellations occur many more short edges than in real foams. To deal with this problem, we consider relaxed models. Relaxation refers to topological and structural modifications of a tessellation in order to make it comply with Plateau's laws of mechanical equilibrium. We inspect samples of different types of foams, closed and open cell foams, polymeric and metallic. By comparing the geometric characteristics of the model and of the relaxed tessellations, we conclude that whether the relaxation improves the edge length distribution strongly depends on the type of foam.

- Test rig optimization (2014)
- Designing good test rigs for fatigue life tests is a common task in the auto- motive industry. The problem to find an optimal test rig configuration and actuator load signals can be formulated as a mathematical program. We in- troduce a new optimization model that includes multi-criteria, discrete and continuous aspects. At the same time we manage to avoid the necessity to deal with the rainflow-counting (RFC) method. RFC is an algorithm, which extracts load cycles from an irregular time signal. As a mathematical func- tion it is non-convex and non-differentiable and, hence, makes optimization of the test rig intractable. The block structure of the load signals is assumed from the beginning. It highly reduces complexity of the problem without decreasing the feasible set. Also, we optimize with respect to the actuators’ positions, which makes it possible to take torques into account and thus extend the feasible set. As a result, the new model gives significantly better results, compared with the other approaches in the test rig optimization. Under certain conditions, the non-convex test rig problem is a union of convex problems on cones. Numerical methods for optimization usually need constraints and a starting point. We describe an algorithm that detects each cone and its interior point in a polynomial time. The test rig problem belongs to the class of bilevel programs. For every instance of the state vector, the sum of functions has to be maximized. We propose a new branch and bound technique that uses local maxima of every summand.