## Doctoral Thesis

### Refine

#### Year of publication

- 2005 (31) (remove)

#### Document Type

- Doctoral Thesis (31) (remove)

#### Language

- English (31) (remove)

#### Keywords

#### Faculty / Organisational entity

The use of polymers subjected to various tribological situations has become state of
the art. Owing to the advantages of self-lubrication and superior cleanliness, more
and more polymer composites are now being used as sliding elements, which were
formerly composed of metallic materials only. The feature that makes polymer composites
so promising in industrial applications is the opportunity to tailor their properties
with special fillers. The main aim of this study was to strength the importance of
integrating various functional fillers in the design of wear-resistant polymer composites
and to understand the role of fillers in modifying the wear behaviour of the materials.
Special emphasis was focused on enhancement of the wear resistance of
thermosetting and thermoplastic matrix composites by nano-TiO2 particles (with a
diameter of 300nm).
In order to optimize the content of various fillers, the tribological performance of a
series of epoxy-based composites, filled with short carbon fibre (SCF), graphite,
PTFE and nano-TiO2 in different proportions and combinations, was investigated.
The patterns of frictional coefficient, wear resistance and contact temperature were
examined by a pin-on-disc apparatus in a dry sliding condition under different contact
pressures and sliding velocities. The experimental results indicated that the addition
of nano-TiO2 effectively reduced the frictional coefficient, and consequently the contact
temperature, of short-fibre reinforced epoxy composites. Based on scanning
electron microscopy (SEM) and atomic force microscopy (AFM) observations of the
worn surfaces, a positive rolling effect of the nanoparticles between the material pairs
was proposed, which led to remarkable reduction of the frictional coefficient. In particular,
this rolling effect protected the SCF from more severe wear mechanisms, especially
in high sliding pressure and speed situations. As a result, the load carrying capacity of materials was significantly improved. In addition, the different contributions
of two solid lubricants, PTFE powders and graphite flakes, on the tribological
performance of epoxy nanocomposites were compared. It seems that graphite contributes
to the improved wear resistance in general, whereas PTFE can easily form a
transfer film and reduce the wear rate, especially in the running-in period. A combination of SCF and solid lubricants (PTFE and graphite) together with TiO2 nanoparticles
can achieve a synergistic effect on the wear behaviour of materials.
The favourable effect of nanoparticles detected in epoxy composites was also found
in the investigations of thermoplastic, e.g. polyamide (PA) 6,6 matrix. It was found
that nanoparticles could reduce the friction coefficient and wear rate of the PA6,6
composite remarkably, when additionally incorporated with short carbon fibres and
graphite flakes. In particular, the addition of nanoparticles contributed to an obvious
enhancement of the tribological performances of the short-fibre reinforced, hightemperature
resistant polymers, e.g. polyetherimide (PEI), especially under extreme
sliding conditions.
A procedure was proposed in order to correlate the contact temperature and the
wear rate with the frictional dissipated energy. Based on this energy consideration, a
better interpretation of the different performance of distinct tribo-systems is possible.
The validity of the model was illustrated for various sliding tests under different conditions.
Although simple quantitative formulations could not be expected at present, the
study may lead to a fundamental understanding of the mechanisms controlling friction
and wear from a general system point of view. Moreover, using the energybased
models, the artificial neural network (ANN) approach was applied to the experimental
data. The well-trained ANN has the potential to be further used for online
monitoring and prediction of wear progress in practical applications.
Die Verwendung von Polymeren im Hinblick auf verschiedene tribologische Anwendungen
entspricht mittlerweile dem Stand der Technik. Aufgrund der Vorteile von
Selbstschmierung und ausgezeichneter Sauberkeit werden polymere Verbundwerkstoffe
immer mehr als Gleitelemente genutzt, welche früher ausschließlich aus metallischen
Werkstoffen bestanden. Die Besonderheit, die polymere Verbundwerkstoffe
so vielversprechend für industrielle Anwendungen macht, ist die Möglichkeit ihre Eigenschaften
durch Zugabe von speziellen Füllstoffen maßzuschneidern. Das Hauptziel
dieser Arbeit bestand darin, die Wichtigkeit der Integration verschiedener funktionalisierter
Füllstoffe in den Aufbau polymerer Verbundwerkstoffe mit hohem Verschleißwiderstand
aufzuzeigen und die Rolle der Füllstoffe hinsichtlich des Verschleißverhaltens
zu verstehen. Hierbei lag besonderes Augenmerk auf der Verbesserung
des Verschleißwiderstandes bei Verbunden mit duromerer und thermoplastischer
Matrix durch die Präsenz von TiO2-Partikeln (Durchmesser 300nm).
Das tribologische Verhalten epoxidharzbasierter Verbunde, gefüllt mit kurzen Kohlenstofffasern
(SCF), Graphite, PTFE und nano-TiO2 in unterschiedlichen Proportionen
und Kombinationen wurde untersucht, um den jeweiligen Füllstoffgehalt zu optimieren.
Das Verhalten von Reibungskoeffizient, Verschleißwiderstand und Kontakttemperatur
wurde unter Verwendung einer Stift-Scheibe Apparatur bei trockenem
Gleitzustand, verschiedenen Kontaktdrücken und Gleitgeschwindigkeiten erforscht.
Die experimentellen Ergebnisse zeigen, dass die Zugabe von nano-TiO2 in kohlenstofffaserverstärkte
Epoxide den Reibungskoeffizienten und die Kontakttemperatur
herabsetzen können. Basierend auf Aufnahmen der verschlissenen Oberflächen
durch Rasterelektronen- (REM) und Rasterkraftmikroskopie (AFM) trat ein positiver
Rolleffekt der Nanopartikel zwischen den Materialpaaren zum Vorschein, welcher zu
einer beachtlichen Reduktion des Reibungskoeffizienten führte. Dieser Rolleffekt schützte insbesondere die SCF vor schwerwiegenderen Verschleißmechanismen,
speziell bei hohem Gleitdruck und hohen Geschwindigkeiten. Als Ergebnis konnte
die Tragfähigkeit dieser Materialien wesentlich verbessert werden. Zusätzlich wurde
die Wirkung zweier fester Schmierstoffe (PTFE-Pulver und Graphit-Flocken) auf die tribologische Leistungsfähigkeit verglichen. Es scheint, daß Graphit generell zur Verbesserung
des Verschleißwiderstandes beiträgt, wobei PTFE einen Transferfilm bilden
kann und die Verschleißrate insbesondere in der Einlaufphase reduziert. Die
Kombination von SCF und festen Schmierstoffen zusammen mit TiO2-Nanopartikeln
kann einen Synergieeffekt bei dem Verschleißverhalten der Materialien hervorrufen.
Der positive Effekt der Nanopartikel in Duromeren wurde ebenfalls bei den Untersuchungen
von Thermoplasten (PA 66) gefunden. Die Nanopartikel konnten den Reibungskoeffizienten
und die Verschleißrate der PA 66-Verbunde herabsetzen, wobei
zusätzlich Kohlenstofffasern und Graphit-Flocken enthalten waren. Die Zugabe von
Nanopartikeln trug offensichtlich auch zur Verbesserung der tribologischen Leistungsfähigkeit
von SCF-verstärkten, hochtemperaturbeständigen Polymeren (PEI)
insbesondere unter extremen Gleitzuständen, bei. Es wurde eine Methode vorgestellt,
um die Kontakttemperatur und die Verschleißrate mit der durch Reibung dissipierten
Energie zu korrelieren. Diese Energiebetrachtung ermöglicht eine bessere
Interpretation der verschiedenen Eigenschaften von ausgewählten Tribo-Systemen.
Die Gültigkeit dieses Models wurde für mehrere Gleittests unter verschiedenen Bedingungen
erklärt.
Vom generellen Blickpunkt eines tribologischen Systems aus mag diese Arbeit zu
einem fundamentalen Verständnis der Mechanismen führen, welche das Reibungs und Verschleißverhalten kontrollieren, obwohl hier einfache quantitative (mathematische)
Zusammenhänge bisher nicht zu erwarten sind. Der auf energiebasierenden
Modellen fußende Lösungsansatz der neuronalen Netzwerke (ANN) wurde darüber
hinaus auf die experimentellen Datensätze angewendet. Die gut trainierten ANN's
besitzen das Potenzial sie in der praktischen Anwendungen zur Online-
Datenauswertung und zur Vorhersage des Verschleißfortschritts einzusetzen.

The scientific and industrial interest devoted to polymer/layered silicate
nanocomposites due to their outstanding properties and novel applications resulted
in numerous studies in the last decade. They cover mostly thermoplastic- and
thermoset-based systems. Recently, studies in rubber/layered silicate
nanocomposites were started, as well. It was presented how complex maybe the
nanocomposite formation for the related systems. Therefore the rules governing their
structure-property relationships have to be clarified. In this Thesis, the related
aspects were addressed.
For the investigations several ethylene propylene diene rubbers (EPDM) of polar and
non-polar origin were selected, as well as, the more polar hydrogenated acrylonitrile
butadiene rubber (HNBR). The polarity was found to be beneficial on the
nanocomposite formation as it assisted to the intercalation of the polymer chains
within the clay galleries. This favored the development of exfoliated structures.
Finding an appropriate processing procedure, i.e. compounding in a kneader instead
of on an open mill, the mechanical performance of the nanocomposites was
significantly improved. The complexity of the nanocomposite formation in
rubber/organoclay system was demonstrated. The deintercalation of the organoclay
observed, was traced to the vulcanization system used. It was evidenced by an
indirect way that during sulfur curing, the primary amine clay intercalant leaves the
silicate surface and migrates in the rubber matrix. This was explained by its
participation in the sulfur-rich Zn-complexes created. Thus, by using quaternary
amine clay intercalants (as it was presented for EPDM or HNBR compounds) the
deintercalation was eliminated. The organoclay intercalation/deintercalation detected
for the primary amine clay intercalants, were controlled by means of peroxide curing
(as it was presented for HNBR compounds), where the vulcanization mechanism
differs from that of the sulfur curing.
The current analysis showed that by selecting the appropriate organoclay type the
properties of the nanocomposites can be tailored. This occurs via generating different
nanostructures (i.e. exfoliated, intercalated or deintercalated). In all cases, the
rubber/organoclay nanocomposites exhibited better performance than vulcanizates
with traditional fillers, like silica or unmodified (pristine) layered silicates.The mechanical and gas permeation behavior of the respective nanocomposites
were modelled. It was shown that models (e.g. Guth’s or Nielsen’s equations)
developed for “traditional” vulcanizates can be used when specific aspects are taken
into consideration. These involve characteristics related to the platy structure of the
silicates, i.e. their aspect ratio after compounding (appearance of platelet stacks), or
their orientation in the rubber matrix (order parameter).

Channel estimation is of great importance in many wireless communication systems, since it influences the overall performance of a system significantly. Especially in multi-user and/or multi-antenna systems, i.e. generally in multi-branch systems, the requirements on channel estimation are very high, since the training signals or so called pilots that are used for channel estimation suffer from multiple access interference. Recently, in the context with such systems more and more attention is paid to concepts for joint channel estimation (JCE) which have the capability to eliminate the multiple access interference and also the interference between the channel coefficients. The performance of JCE can be evaluated in noise limited systems by the SNR degradation and in interference limited systems by the variation coefficient. Theoretical analysis carried out in this thesis verifies that both performance criteria are closely related to the patterns of the pilots used for JCE, no matter the signals are represented in the time domain or in the frequency domain. Optimum pilots like disjoint pilots, Walsh code based pilots or CAZAC code based pilots, whose constructions are described in this thesis, do not show any SNR degradation when being applied to multi-branch systems. It is shown that optimum pilots constructed in the time domain become optimum pilots in the frequency domain after a discrete Fourier transformation. Correspondingly, optimum pilots in the frequency domain become optimum pilots in the time domain after an inverse discrete Fourier transformation. However, even for optimum pilots different variation coefficients are obtained in interference limited systems. Furthermore, especially for OFDM-based transmission schemes the peak-to-average power ratio (PAPR) of the transmit signal is an important decision criteria for choosing the most suitable pilots. CAZAC code based pilots are the only pilots among the regarded pilot constructions that result in a PAPR of 0 dB for the transmit signal that origins in the transmitted pilots. When summarizing the analysis regarding the SNR degradation, the variation coefficient and the PAPR with respect to one single service area and considering the impact due to interference from other adjacent service areas that occur due to a certain choice of the pilots, one can conclude that CAZAC codes are the most suitable pilots for the application in JCE of multi-carrier multi-branch systems, especially in the case if CAZAC codes that origin in different mother codes are assigned to different adjacent service areas. The theoretical results of the thesis are verified by simulation results. The choice of the parameters for the frequency domain or time domain JCE is oriented towards the evaluated implementation complexity. According to the chosen parameterization of the regarded OFDM-based and FMT-based systems it is shown that a frequency domain JCE is the best choice for OFDM and a time domain JCE is the best choice for FMT applying CAZAC codes as pilots. The results of this thesis can be used as a basis for further theoretical research and also for future JCE implementation in wireless systems.

This thesis contains the mathematical treatment of a special class of analog microelectronic circuits called translinear circuits. The goal is to provide foundations of a new coherent synthesis approach for this class of circuits. The mathematical methods of the suggested synthesis approach come from graph theory, combinatorics, and from algebraic geometry, in particular symbolic methods from computer algebra. Translinear circuits form a very special class of analog circuits, because they rely on nonlinear device models, but still allow a very structured approach to network analysis and synthesis. Thus, translinear circuits play the role of a bridge between the "unknown space" of nonlinear circuit theory and the very well exploited domain of linear circuit theory. The nonlinear equations describing the behavior of translinear circuits possess a strong algebraic structure that is nonetheless flexible enough for a wide range of nonlinear functionality. Furthermore, translinear circuits offer several technical advantages like high functional density, low supply voltage and insensitivity to temperature. This unique profile is the reason that several authors consider translinear networks as the key to systematic synthesis methods for nonlinear circuits. The thesis proposes the usage of a computer-generated catalog of translinear network topologies as a synthesis tool. The idea to compile such a catalog has grown from the observation that on the one hand, the topology of a translinear network must satisfy strong constraints which severely limit the number of "admissible" topologies, in particular for networks with few transistors, and on the other hand, the topology of a translinear network already fixes its essential behavior, at least for static networks, because the so-called translinear principle requires the continuous parameters of all transistors to be the same. Even though the admissible topologies are heavily restricted, it is a highly nontrivial task to compile such a catalog. Combinatorial techniques have been adapted to undertake this task. In a catalog of translinear network topologies, prototype network equations can be stored along with each topology. When a circuit with a specified behavior is to be designed, one can search the catalog for a network whose equations can be matched with the desired behavior. In this context, two algebraic problems arise: To set up a meaningful equation for a network in the catalog, an elimination of variables must be performed, and to test whether a prototype equation from the catalog and a specified equation of desired behavior can be "matched", a complex system of polynomial equations must be solved, where the solutions are restricted to a finite set of integers. Sophisticated algorithms from computer algebra are applied in both cases to perform the symbolic computations. All mentioned algorithms have been implemented using C++, Singular, and Mathematica, and are successfully applied to actual design problems of humidity sensor circuitry at Analog Microelectronics GmbH, Mainz. As result of the research conducted, an exhaustive catalog of all static formal translinear networks with at most eight transistors is available. The application for the humidity sensor system proves the applicability of the developed synthesis approach. The details and implementations of the algorithms are worked out only for static networks, but can easily be adopted for dynamic networks as well. While the implementation of the combinatorial algorithms is stand-alone software written "from scratch" in C++, the implementation of the algebraic algorithms, namely the symbolic treatment of the network equations and the match finding, heavily rely on the sophisticated Gröbner basis engine of Singular and thus on more than a decade of experience contained in a special-purpose computer algebra system. It should be pointed out that the thesis contains the new observation that the translinear loop equations of a translinear network are precisely represented by the toric ideal of the network's translinear digraph. Altogether, this thesis confirms and strengthenes the key role of translinear circuits as systematically designable nonlinear circuits.

Automated theorem proving is a search problem and, by its undecidability, a very difficult one. The challenge in the development of a practically successful prover is the mapping of the extensively developed theory into a program that runs efficiently on a computer. Starting from a level-based system model for automated theorem provers, in this work we present different techniques that are important for the development of powerful equational theorem provers. The contributions can be divided into three areas: Architecture. We present a novel prover architecture that is based on a set-based compression scheme. With moderate additional computational costs we achieve a substantial reduction of the memory requirements. Further wins are architectural clarity, the easy provision of proof objects, and a new way to parallelize a prover which shows respectable speed-ups in practice. The compact representation paves the way to new applications of automated equational provers in the area of verification systems. Algorithms. To improve the speed of a prover we need efficient solutions for the most time-consuming sub-tasks. We demonstrate improvements of several orders of magnitude for two of the most widely used term orderings, LPO and KBO. Other important contributions are a novel generic unsatisfiability test for ordering constraints and, based on that, a sufficient ground reducibility criterion with an excellent cost-benefit ratio. Redundancy avoidance. The notion of redundancy is of central importance to justify simplifying inferences which are used to prune the search space. In our experience with unfailing completion, the usual notion of redundancy is not strong enough. In the presence of associativity and commutativity, the provers often get stuck enumerating equations that are permutations of each other. By extending and refining the proof ordering, many more equations can be shown redundant. Furthermore, our refinement of the unfailing completion approach allows us to use redundant equations for simplification without the need to consider them for generating inferences. We describe the efficient implementation of several redundancy criteria and experimentally investigate their influence on the proof search. The combination of these techniques results in a considerable improvement of the practical performance of a prover, which we demonstrate with extensive experiments for the automated theorem prover Waldmeister. The progress achieved allows the prover to solve problems that were previously out of reach. This considerably enhances the potential of the prover and opens up the way for new applications.

Over the last decades, mathematical modeling has reached nearly all fields of natural science. The abstraction and reduction to a mathematical model has proven to be a powerful tool to gain a deeper insight into physical and technical processes. The increasing computing power has made numerical simulations available for many industrial applications. In recent years, mathematicians and engineers have turned there attention to model solid materials. New challenges have been found in the simulation of solids and fluid-structure interactions. In this context, it is indispensable to study the dynamics of elastic solids. Elasticity is a main feature of solid bodies while demanding a great deal of the numerical treatment. There exists a multitude of commercial tools to simulate the behavior of elastic solids. Anyhow, the majority of these software packages consider quasi-stationary problems. In the present work, we are interested in highly dynamical problems, e.g. the rotation of a solid. The applicability to free-boundary problems is a further emphasis of our considerations. In the last years, meshless or particle methods have attracted more and more attention. In many fields of numerical simulation these methods are on a par with classical methods or superior to them. In this work, we present the Finite Pointset Method (FPM) which uses a moving least squares particle approximation operator. The application of this method to various industrial problems at the Fraunhofer ITWM has shown that FPM is particularly suitable for highly dynamical problems with free surfaces and strongly changing geometries. Thereby, FPM offers exactly the features that we require for the analysis of the dynamics of solid bodies. In the present work, we provide a numerical scheme capable to simulate the behavior of elastic solids. We present the system of partial differential equations describing the dynamics of elastic solids and show its hyperbolic character. In particular, we focus our attention to the constitutive law for the stress tensor and provide evolution equations for the deviatoric part of the stress tensor in order to circumvent limitations of the classical Hooke's law. Furthermore, we present the basic principle of the Finite Pointset Method. In particular, we provide the concept of upwinding in a given direction as a key ingredient for stabilizing hyperbolic systems. The main part of this work describes the design of a numerical scheme based on FPM and an operator splitting to take the different processes within a solid body into account. Each resulting subsystem is treated separately in an adequate way. Hereby, we introduce the notion of system-inherent directions and dimensional upwinding. Finally, a coupling strategy for the subsystems and results are presented. We close this work with some final conclusions and an outlook on future work.

In this thesis we have discussed the problem of decomposing an integer matrix \(A\) into a weighted sum \(A=\sum_{k \in {\mathcal K}} \alpha_k Y^k\) of 0-1 matrices with the strict consecutive ones property. We have developed algorithms to find decompositions which minimize the decomposition time \(\sum_{k \in {\mathcal K}} \alpha_k\) and the decomposition cardinality \(|\{ k \in {\mathcal K}: \alpha_k > 0\}|\). In the absence of additional constraints on the 0-1 matrices \(Y^k\) we have given an algorithm that finds the minimal decomposition time in \({\mathcal O}(NM)\) time. For the case that the matrices \(Y^k\) are restricted to shape matrices -- a restriction which is important in the application of our results in radiotherapy -- we have given an \({\mathcal O}(NM^2)\) algorithm. This is achieved by solving an integer programming formulation of the problem by a very efficient combinatorial algorithm. In addition, we have shown that the problem of minimizing decomposition cardinality is strongly NP-hard, even for matrices with one row (and thus for the unconstrained as well as the shape matrix decomposition). Our greedy heuristics are based on the results for the decomposition time problem and produce better results than previously published algorithms.

Sterisch anspruchsvolle Cyclopentadienyl-Liganden wurden zur Stabilisierung neuer Mono(cyclopentadienyl) Verbindungen der schweren Erdalkalimetalle eingesetzt und deren Funktionalisierbarkeit dieser Spezies wurde exemplarisch durch die Synthese neutraler Tripeldecker-Sandwichkomplexe demonstriert. Die dabei ausgebildeten Molekülstrukturen lassen sich mittels DFT-Rechnungen zuverlässig vorhersagen. In diesem Zusammenhang wurde ebenfalls der Cyclononatetraenyl-Ligand, dessen Komplexeigenschaften bisher nur unzureichend untersucht wurden, eingesetzt. Im Rahmen dieser Arbeit gelang die Synthese des Bis(cyclononatetraenyl)bariums, Ba(C9H9)2, und dessen spektroskopische Charakterisierung. DFT-Rechnungen sagen für diesen Komplex eine Metallocenstruktur mit nahezu parallelen Ringen und einem Ba-Ring Abstand von 2.37 Å voraus. Durch den Einsatz des Tetraisopropylcyclopentadienyl (4Cp) und Tri(tert.-butyl)cyclopentadienyl (Cp’)-Liganden gelang die Synthese von Bis- und Monocyclopentadienyl-Verbindungen der frühen und späten Lanthanoide. Besonders interessant in diesem Zusammenhang ist die erfolgreiche Darstellung des Azido-Clusters, [Na(dme)3]2[4Cp6Yb6(N3)14] (4Cp= (Me2CH)4C5H), der die unterschiedlichen Koordinationsmöglichkeiten des Azido-Liganden in einem einzigen Komplex vereint. Vergleichbare Komplexe waren in der Organolanthanoidchemie bisher unbekannt. Durch Substitution am Cyclopentadienyl-System lassen sich dessen elektronische und sterische Eigenschaften signifikant verändern. Die Auswirkungen dieser Effekte können sehr eindrucksvoll an Manganocen-Komplexen demonstriert werden, in denen sich der low- und high-spin Zustand energetisch nur sehr wenig unterscheiden. Der elektronische Grundzustand einer Reihe unterschiedlich substituierter Manganocen-Komplexe wurde mittels Festkörpermagnetismus, ESR, Röntgenstrukturanalyse, EXAFS und variabler Temperatur UV-Vis Spektroskopie bestimmt, und mit dem Substitutionsmuster am Cyclopentadienyl-System korreliert. Spin-Gleichgewichte ließen sich für [(Me3C)C5H4]2Mn, [(Me3C)2C5H3]2Mn und [(Me3C)(Me3Si)C5H3]2Mn nachweisen. Theoretische Rechnungen postulieren, dass Cerocen, Ce(C8H8)2, ein Beispiel für Moleküle mit gemischt-konfiguriertem Grundzustand sei, der durch 80 % [(Ce)f1e2u(cot)e2u3] und 20 % [(Ce)f0e2u(cot)e2u4] beschreiben werden könne. Obwohl dieses Molekül bereits seit 1976 bekannt ist, ist dessen elektronische Struktur bis heute sehr umstritten. Im Rahmen dieser Arbeit wurden neue Synthesekonzepte für diese Verbindung entwickelt und die elektronische Struktur mittels magnetischer Messungen im Festkörper, EXAFS und XANES Studien untersucht. Die dabei erhaltenen Daten sind in sehr guter Übereinstimmung mit den theoretischen Rechnungen und belegen die Bedeutung eines gemischt-konfigurierten Grundzustandes bei der Bindung in Organometallkomplexen der f-Block Metalle. Während in Cerocen nur ein temperaturunabhängiger Paramagnetismus (TIP) beobachtet werden kann, findet man eine starke Temperaturabhängigkeit der magnetischen Suszeptibilität in Ytterbium Systemen des Typs Cp’2Yb(bipy’) [Cp´ und bipy´ sind substituierte Cyclopentadienyl- oder 4,4’-substituierter 2,2’-Bipyridyl-Liganden]. Temperaturabhängige XANES-Experimenten belegen, dass auch in diesen Systemen ein gemischt-konfigurierter Grundzustand vorliegt, der durch [(Yb)f14(bipy)b1()0] und [(Yb)f13(bipy)b1()1] beschreiben werden kann. Der relative Anteil beider Wellenfunktionen zum Grundzustand wird durch Substitution am 2,2’-Bipyridyl- oder Cyclopentadienyl-System signifikant beeinflusst. Modelle, mit denen sich dieses Verhalten qualitativ beschreiben lässt, wurden im Rahmen dieser Arbeit entwickelt. Ein kinetisch stabilisiertes, adduktfreies Titanocen wurde unter Verwendung des Di(tert.-butyl)cyclopentadienyl Liganden hergestellt und dessen Reaktivität gegenüber kleinen Molekülen, z.B. CO, N2 und H2 untersucht. Im Rahmen der Reaktivitätsstudien wurden ebenfalls 2,2’-Bipyridyl Addukte an das Cp’2Ti Fragment synthetisiert und deren magnetische Eigenschaften erforscht. Durch Variationen am 2,2’-Bipyridyl System lässt sich das Singlet-Triplet Splitting in diesem System gezielt steuern.

The aim of the thesis is the numerical investigation of saturated, stationary, incompressible Newtonian flow in porous media when inertia is not negligible. We focus our attention to the Navier-Stokes system with two pressures derived by two-scale homogenization. The thesis is subdivided into five Chapters. After the introductory remarks on porous media, filtration laws and upscaling methods, the first chapter is closed by stating the basic terminology and mathematical fundamentals. In Chapter 2, we start by formulating the Navier-Stokes equations on a periodic porous medium. By two-scale expansions of the velocity and pressure, we formally derive the Navier-Stokes system with two pressures. For the sake of completeness, known existence and uniqueness results are repeated and a convergence proof is given. Finally, we consider Stokes and Navier-Stokes systems with two pressures with respect to their relation to Darcy's law. Chapter 3 and Chapter 4 are devoted to the numerical solution of the nonlinear two pressure system. Therefore, we follow two approaches. The first approach which is developed in Chapter 3 is based on a splitting of the Navier-Stokes system with two pressures into micro and macro problems. The splitting is achieved by Taylor expanding the permeability function or by discretely computing the permeability function. The problems to be solved are a series of Stokes and Navier-Stokes problems on the periodicity cell. The Stokes problems are solved by an Uzawa conjugate gradient method. The Navier-Stokes equations are linearized by a least-squares conjugate gradient method, which leads to the solution of a sequence of Stokes problems. The macro problem consists of solving a nonlinear uniformly elliptic equation of second order. The least-squares linearization is applied to the macro problem leading to a sequence of Poisson problems. All equations will be discretized by finite elements. Numerical results are presented at the end of Chapter 3. The second approach presented in Chapter 4 relies on the variational formulation in a certain Hilbert space setting of the Navier-Stokes system with two pressures. The nonlinear problem is again linearized by the least-squares conjugate gradient method. We obtain a sequence of Stokes systems with two pressures. For the latter systems, we propose a fast solution method which relies on pre-computing Stokes systems on the periodicity cell for finite element basis functions acting as right hand sides. Finally, numerical results are discussed. In Chapter 5 we are concerned with modeling and simulation of the pressing section of a paper machine. We state a two-dimensional model of a press nip which takes into account elasticity and flow phenomena. Nonlinear filtration laws are incorporated into the flow model. We present a numerical solution algorithm and the chapter is closed by a numerical investigation of the model with special focus on inertia effects.

This thesis aims at an overall improvement of the diffusion coefficient predictions. For this reason the theoretical determination of diffusion, viscosity, and thermodynamics in liquid systems is discussed. Furthermore, the experimental determination of diffusion coefficients is also part of this work. All investigations presented are carried out for organic binary liquid mixtures. Diffusion coefficient data of 9 highly nonideal binary mixtures are reported over the whole concentration range at various temperatures, (25, 30, and 35) °C. All mixtures investigated in a Taylor dispersion apparatus consist of an alcohol (ethanol, 1-propanol, or 1-butanol) dissolved in hexane, cyclohexane, carbon tetrachloride, or toluene. The uncertainty of the reported data is estimated to be within 310-11 m2s-1. To compute the thermodynamic correction factor an excess Gibbs energy model is required. Therefore, the applicability of COSMOSPACE to binary VLE predictions is thoroughly investigated. For this purpose a new method is developed to determine the required molecular parameters such as segment types, areas, volumes, and interaction parameters. So-called sigma profiles form the basis of this approach which describe the screening charge densities appearing on a molecule’s surface. To improve the prediction results a constrained two-parameter fitting strategy is also developed. These approaches are crucial to guarantee the physical significance of the segment parameters. Finally, the prediction quality of this approach is compared to the findings of the Wilson model, UNIQUAC, and the a priori predictive method COSMO-RS for a broad range of thermodynamic situations. The results show that COSMOSPACE yields results of similar quality compared to the Wilson model, while both perform much better than UNIQUAC and COSMO-RS. Since viscosity influences also the diffusion process, a new mixture viscosity model has been developed on the basis of Eyring’s absolute reaction rate theory. The nonidealities of the mixture are accounted for with the thermodynamically consistent COSMOSPACE approach. The required model and component parameters are derived from sigma-profiles, which form the basis of the a priori predictive method COSMO-RS. To improve the model performance two segment parameters are determined from a least-squares analysis to experimental viscosity data, whereas a constraint optimisation procedure is applied. In this way the parameters retain their physical meaning. Finally, the viscosity calculations of this approach are compared to the findings of the Eyring-UNIQUAC model for a broad range of chemical mixtures. These results show that the new Eyring-COSMOSPACE approach is superior to the frequently employed Eyring-UNIQUAC method. Finally, on the basis of Eyring’s absolute reaction rate theory a new model for the Maxwell-Stefan diffusivity has been developed. This model, an extension of the Vignes equation, describes the concentration dependence of the diffusion coefficient in terms of the diffusivities at infinite dilution and an additional excess Gibbs energy contribution. This energy part allows the explicit consideration of thermodynamic nonidealities within the modelling of this transport property. If the same set of interaction parameters, which has been derived from VLE data, is applied for this part and for the thermodynamic correction, a theoretically sound modelling of VLE and diffusion can be achieved. The influence of viscosity and thermodynamics on the model accuracy is thoroughly investigated. For this purpose diffusivities of 85 binary mixtures consisting of alkanes, cycloalkanes, halogenated alkanes, aromatics, ketones, and alcohols are computed. The average relative deviation between experimental data and computed values is approximately 8 % depending on the choice of the gE-model. These results indicate that this model is superior to some widely used methods. In summary, it can be said that the new approach facilitates the prediction of diffusion coefficients. The final equation is mathematically simple, universally applicable, and the prediction quality is as good as other models recently developed without having to worry about additional parameters, like pure component physical property data, self diffusion coefficients, or mixture viscosities. In contrast to many other models, the influence of the mixture viscosity can be omitted. Though a viscosity model is not required in the prediction of diffusion coefficients with the new equation, the models presented in this work allow a consistent modelling approach of diffusion, viscosity, and thermodynamics in liquid systems.