## Fraunhofer (ITWM)

- Applying multiobjective evolutionary algorithms in industrial projects (2006)
- During the recent years, multiobjective evolutionary algorithms have matured as a flexible optimization tool which can be used in various areas of reallife applications. Practical experiences showed that typically the algorithms need an essential adaptation to the specific problem for a successful application. Considering these requirements, we discuss various issues of the design and application of multiobjective evolutionary algorithms to real-life optimization problems. In particular, questions on problem-specific data structures and evolutionary operators and the determination of method parameters are treated. As a major issue, the handling of infeasible intermediate solutions is pointed out. Three application examples in the areas of constrained global optimization (electronic circuit design), semi-infinite programming (design centering problems), and discrete optimization (project scheduling) are discussed.

- Dynamic transportation of patients in hospitals (2006)
- This paper analyzes and solves a patient transportation problem arising in several large hospitals. The aim is to provide an efficient and timely transport service to patients between several locations on a hospital campus. Transportation requests arrive in a dynamic fashion and the solution methodology must therefore be capable of quickly inserting new requests in the current vehicle routes. Contrary to standard dial-a-ride problems, the problem under study contains several complicating constraints which are specific to a hospital context. The paper provides a detailed description of the problem and proposes a two-phase heuristic procedure capable of handling its many features. In the first phase a simple insertion scheme is used to generate a feasible solution, which is improved in the second phase with a tabu search algorithm. The heuristic procedure was extensively tested on real data provided by a German hospital. Results show that the algorithm is capable of handling the dynamic aspect of the problem and of providing high quality solutions. In particular, it succeeded in reducing waiting times for patients while using fewer vehicles.

- Balancing control and simplicity: a variable aggregation method in intensity modulated radiation therapy planning (2006)
- It is commonly believed that not all degrees of freedom are needed to produce good solutions for the treatment planning problem in intensity modulated radiotherapy treatment (IMRT). However, typical methods to exploit this fact have either increased the complexity of the optimization problem or were heuristic in nature. In this work we introduce a technique based on adaptively refining variable clusters to successively attain better treatment plans. The approach creates approximate solutions based on smaller models that may get arbitrarily close to the optimal solution. Although the method is illustrated using a specific treatment planning model, the components constituting the variable clustering and the adaptive refinement are independent of the particular optimization problem.

- A Stochastic Model for the Fiber Lay-down Process in the Nonwoven Production (2006)
- In this paper we present and investigate a stochastic model for the lay-down of fibers on a conveyor belt in the production process of nonwovens. The model is based on a stochastic differential equation taking into account the motion of the ber under the influence of turbulence. A reformulation as a stochastic Hamiltonian system and an application of the stochastic averaging theorem lead to further simplications of the model. Finally, the model is used to compute the distribution of functionals of the process that might be helpful for the quality assessment of industrial fabrics.

- A dynamic algorithm for beam orientations in multicriteria IMRT planning (2006)
- For the last decade, optimization of beam orientations in intensitymodulated radiation therapy (IMRT) has been shown to be successful in improving the treatment plan. Unfortunately, the quality of a set of beam orientations depends heavily on its corresponding beam intensity proles. Usually, a stochastic selector is used for optimizing beam orientation, and then a single objective inverse treatment planning algorithm is used for the optimization of beam intensity proles. The overall time needed to solve the inverse planning for every random selection of beam orientations becomes excessive. Recently, considerable improvement has been made in optimizing beam intensity proles by using multiple objective inverse treatment planning. Such an approach results in a variety of beam intensity proles for every selection of beam orientations, making the dependence between beam orientations and its intensity proles less important. We take advantage of this property to present a dynamic algorithm for beam orientation in IMRT which is based on multicriteria inverse planning. The algorithm approximates beam intensity proles iteratively instead of doing it for every selection of beam orientation, saving a considerable amount of calculation time. Every iteration goes from an N-beam plan to a plan with N + 1 beams. Beam selection criteria are based on a score function that minimizes the deviation from the prescribed dose, in addition to a reject-accept criterion. To illustrate the eciency of the algorithm it has been applied to an articial example where optimality is trivial and to three real clinical cases: a prostate carcinoma, a tumor in the head and neck region and a paraspinal tumor. In comparison to the standard equally spaced beam plans, improvements are reported in all of the three clinical examples, even, in some cases with a fewer number of beams.

- MSB Simulation of a hexapod based suspension test rig (2006)
- Testing a new suspension based on real load data is performed on elaborate multi channel test rigs. Usually wheel forces and moments measured during driving maneuvers are reproduced on the rig. Because of the complicated interaction between rig and suspension each new rig configuration has to prove its efficiency with respect to the requirements and the configuration might be subject to optimization. This paper deals with modeling a new rig concept based on two hexapods. The real physical rig has been designed and meanwhile built by MOOG-FCS for VOLKSWAGEN. The aim of the simulation project reported here was twofold: First the simulation of the rig together with real VOLKSWAGEN suspension models at a time where the design was not yet finalized was used to verify and optimize the desired properties of the rig. Second the simulation environment was set up in a way that it can be used to prepare real tests on the rig. The model contains the geometric configuration as well as the hydraulics and the controller. It is implemented as an ADAMS/Car template and can be combined with different suspension models to get a complete assembly representing the entire test rig. Using this model, all steps required for a real test run such as controller adaptation, drive file iteration and simulation can be performed. Geometric or hydraulic parameters can be modified easily to improve the setup and adapt the system to the suspension and the load data.

- Comparison of the solutions of the elastic and elastoplastic boundary value problems (2006)
- In this article, we consider the quasistatic boundary value problems of linear elasticity and nonlinear elastoplasticity, with linear Hooke’s law in the elastic regime for both problems and with the linear kinematic hardening law for the plastic regime in the latter problem. We derive expressions and estimates for the difference of the solutions of both models, i.e. for the stresses, the strains and the displacements. To this end, we use the stop and play operators of nonlinear functional analysis. Further, we give an explicit example of a homotopy between the solutions of both problems.

- Usage of Simulation for Design and Optimization of Testing (2006)
- Die Simulation von Prüfständen und insbesondere von Baugruppen und Gesamtfahrzeugen auf Prüfständen durch Kopplung von Mehrkörpersimulation mit Modellen für Regelung und Aktuatorik leistet einen wesentlichen Beitrag zur Entwicklungszeitverkürzung. In diesem Beitrag wird ein Kooperationsprojekt vorgestellt, in dem ein Co- Simulationsmodell für die beweglichen Massen sowie die Regelung und Hydraulik eines Gesamtfahrzeugprüfstands erstellt wurde. Es wird sowohl auf die Validierung des Fahrzeugmodells durch Straßenmessungen als auch auf die Identifikation und Validierung des Prüfstandsmodells einschließlich Servohydraulik und Regelung eingegangen.

- Interval Methods for Analog Circuits (2006)
- Reliable methods for the analysis of tolerance-affected analog circuits are of great importance in nowadays microelectronics. It is impossible to produce circuits with exactly those parameter specifications proposed in the design process. Such component tolerances will always lead to small variations of a circuit’s properties, which may result in unexpected behaviour. If lower and upper bounds to parameter variations can be read off the manufacturing process, interval arithmetic naturally enters the circuit analysis area. This paper focuses on the frequency-response analysis of linear analog circuits, typically consisting of current and voltage sources as well as resistors, capacitances, inductances, and several variants of controlled sources. These kind of circuits are still widely used in analog circuit design as equivalent circuit diagrams for representing in certain application tasks Interval methods have been applied to analog circuits before. But yet this was restricted to circuit equations only, with no interdependencies between the matrix elements. But there also exist formulations of analog circuit equations containing dependent terms. Hence, for an efficient application of interval methods, it is crucial to regard possible dependencies in circuit equations. Part and parcel of this strategy is the handling of fill-in patterns for those parameters related to uncertain components. These patterns are used in linear circuit analysis for efficient equation setup. Such systems can efficiently be solved by successive application of the Sherman-Morrison formula. The approach can also be extended to complex-valued systems from frequency domain analysis of more general linear circuits. Complex values result here from a Laplace transform of frequency-dependent components like capacitances and inductances. In order to apply interval techniques, a real representation of the linear system of equations can be used for separate treatment of real and imaginary part of the variables. In this representation each parameter corresponds to the superposition of two fill-in patterns. Crude bounds – obtained by treating both patterns independently – can be improved by consideration of the correlations to tighter enclosures of the solution. The techniques described above have been implemented as an extension to the toolbox Analog Insydes, an add-on package to the computer algebra system Mathematica for modeling, analysis, and design of analog circuits.

- A unified approach to Credit Default Swaption and Constant Maturity Credit Default Swap valuation (2006)
- In this paper we examine the pricing of arbitrary credit derivatives with the Libor Market Model with Default Risk. We show, how to setup the Monte Carlo-Simulation efficiently and investigate the accuracy of closed-form solutions for Credit Default Swaps, Credit Default Swaptions and Constant Maturity Credit Default Swaps. In addition we derive a new closed-form solution for Credit Default Swaptions which allows for time-dependent volatility and abitrary correlation structure of default intensities.1