It is difficult for robots to handle a vibrating deformable object. Even for human beings it is a high-risk operation to, for example, insert a vibrating linear object into a small hole. However, fast manipulation using a robot arm is not just a dream; it may be achieved if some important features of the vibration are detected online. In this paper, we present an approach for fast manipulation using a force/torque sensor mounted on the robot's wrist. Template matching method is employed to recognize the vibrational phase of the deformable objects. Therefore, a fast manipulation can be performed with a high success rate, even if there is acute vibration. Experiments inserting a deformable object into a hole are conducted to test the presented method. Results demonstrate that the presented sensor-based online fast manipulation is feasible.
This paper discusses the problem of automatic off-line programming and motion planning for industrial robots. At first, a new concept consisting of three steps is proposed. The first step, a new method for on-line motion planning is introduced. The motion planning method is based on the A*-search algorithm and works in the implicit configuration space. During searching, the collisions are detected in the explicitly represented Cartesian workspace by hierarchical distance computation. In the second step, the trajectory planner has to transform the path into a time and energy optimal robot program. The practical application of these two steps strongly depends on the method for robot calibration with high accuracy, thus, mapping the virtual world onto the real world, which is discussed in the third step.
This paper presents a new approach to parallel motion planning for industrial robot arms with six degrees of freedom in an on-line given 3D environment. The method is based on the A-search algorithm and needs no essential off-line computations. The algorithm works in an implicitly descrete configuration space. Collisions are detected in the Cartesian workspace by hierarchical distance computation based on the given CAD model. By decomposing the 6D configuration space into hypercubes and cyclically mapping them onto multiple processing units, a good load distribution can be achieved. We have implemented the parallel motion planner on a workstation cluster with 9 PCs and tested the planner for several benchmark environments. With optimal discretisation, the new approach usually shows linear speedups. In on-line provided environments with static obstacles, the parallel planning times are only a few seconds.
A practical distributed planning and control system for industrial robots is presented. The hierarchical concept consists of three independent levels. Each level is modularly implemented and supplies an application interface (API) to the next higher level. At the top level, we propose an automatic motion planner. The motion planner is based on a best-first search algorithm and needs no essential off-line computations. At the middle level, we propose a PC-based robot control architecture, which can easily be adapted to any industrial kinematics and application. Based on a client/server-principle, the control unit estab-lishes an open user interface for including application specific programs. At the bottom level, we propose a flexible and modular concept for the integration of the distributed motion control units based on the CAN bus. The concept allows an on-line adaptation of the control parameters according to the robot's configuration. This implies high accuracy for the path execution and improves the overall system performance.
A new problem for the automated off-line programming of industrial robot application is investigated. The Multi-Goal Path Planning is to find the collision-free path connecting a set of goal poses and minimizing e.g. the total path length. Our solution is based on an earlier reported path planner for industrial robot arms with 6 degrees-of-freedom in an on-line given 3D environment. To control the path planner, four different goal selection methods are introduced and compared. While the Random and the Nearest Pair Selection methods can be used with any path planner, the Nearest Goal and the Adaptive Pair Selection method are favorable for our planner. With the latter two goal selection methods, the Multi-Goal Path Planning task can be significantly accelerated, because they are able to automatically solve the simplest path planning problems first. Summarizing, compared to Random or Nearest Pair Selection, this new Multi-Goal Path Planning approach results in a further cost reduction of the programming phase.
This paper presents a new approach to parallel motion planning for industrial robot arms with six degrees of freedom in an on-line given 3D environment. The method is based on the A*-search algorithm and needs no essential off-line computations. The algorithm works in an implicitly descrete configuration space. Collisions are detected in the cartesian workspace by hierarchical distance computation based on the given CAD model. By decomposing the 6D configuration space into hypercubes and cyclically mapping them onto multiple processing units, a good load distribution can be achieved. We have implemented the parallel motion planner on a workstation cluster with 9 PCs and tested the planner for several benchmark environments. With optimal discretisation, the new approach usually shows linear, and sometimes even superlinear speedups. In on-line provided environments with static obstacles, the parallel planning times are only a few seconds.
Die Bewegungsplanung für Industrieroboter ist eine notwendige Voraussetzung, damit sich autonome Systeme kollisionsfrei durch die Umwelt bewegen können. Die Berücksichtigung von dynamischen Hindernissen zur Laufzeit erfordert allerdings leistungsfähige Algorithmen, zur Lösung dieser Aufgabenstellung in Echtzeit. Eine Möglichkeit zur Beschleunigung der Algorithmen ist der effiziente Einsatz von skalierbarer Parallelverarbeitung. Die softwaretechnische Umsetzung kann aber nur dann erfolgreich sein, wenn ein Parallelrechner zur Verfügung steht, der einen hohen Datendurchsatz bei geringer Latenzzeit bietet. Darüber hinaus muß dieser Parallelrechner unter vertretbarem Aufwand bedienbar sein und ein gutes Preisleistungsverhältnis aufweisen, damit die Parallelverarbeitung verstärkt in der Industrie zum Einsatz kommt. In diesem Artikel wird ein Workstation-Cluster auf der Basis von neun Standard- PCs vorgestellt, die über eine spezielle Kommunikationskarte miteinander vernetzt sind. In den einzelnen Abschnitten werden die gesammelten Erfahrungen bei der Inbetriebnahme, Systemadministration und Anwendung geschildert. Als Beispiel für eine Anwendung auf diesem Cluster wird ein paralleler Bewegungsplaner für Industrieroboter beschrieben.
INRECA offers tools and methods for developing, validating, and maintaining classification, diagnosis and decision support systems. INRECA's basic technologies are inductive and case-based reasoning . INRECA fully integrates  both techniques within one environment and uses the respective advantages of both technologies. Its object-oriented representation language CASUEL [10, 3] allows the definition of complex case structures, relations, similarity measures, as well as background knowledge to be used for adaptation. The objectoriented representation language makes INRECA a domain independent tool for its destined kind of tasks. When problems are solved via case-based reasoning, the primary kind of knowledge that is used during problem solving is the very specific knowledge contained in the cases. However, in many situations this specific knowledge by itself is not sufficient or appropriate to cope with all requirements of an application. Very often, background knowledge is available and/or necessary to better explore and interpret the available cases . Such general knowledge may state dependencies between certain case features and can be used to infer additional, previously unknown features from the known ones.
About the approach The approach of TOPO was originally developed in the FABEL project1 to support architects in designing buildings with complex installations. Supplementing knowledge-based design tools, which are available only for selected subtasks, TOPO aims to cover the whole design process. To that aim, it relies almost exclusively on archived plans. Input to TOPO is a partial plan, and output is an elaborated plan. The input plan constitutes the query case and the archived plans form the case base with the source cases. A plan is a set of design objects. Each design object is defined by some semantic attributes and by its bounding box in a 3-dimensional coordinate system. TOPO supports the elaboration of plans by adding design objects.