The paper focuses on the problem of point-to-point trajectory planning for flexible redundant robot manipulators (FRM) in joint space. Compared with irredundant flexible manipulators, a FRM possesses additional possibilities during point-to-point trajectory planning due to its kinematics redundancy. A trajectory planning method to minimize vibration and/or executing time of a point-to-point motion is presented for FRM based on Genetic Algorithms (GAs). Kinematics redundancy is integrated into the presented method as planning variables. Quadrinomial and quintic polynomial are used to describe the segments that connect the initial, intermediate, and final points in joint space. The trajectory planning of FRM is formulated as a problem of optimization with constraints. A planar FRM with three flexible links is used in simulation. Case studies show that the method is applicable.
We present a system concept allowing humans to work safely in the same environment as a robot manipulator. Several cameras survey the common workspace. A look-up-table-based fusion algorithm is used to back-project directly from the image spaces of the cameras to the manipulator?s con-figuration space. In the look-up-tables both, the camera calibration and the robot geometry are implicitly encoded. For experiments, a conven-tional 6 axis industrial manipulator is used. The work space is surveyed by four grayscale cameras. Due to the limits of present robot controllers, the computationally expensive parts of the system are executed on a server PC that communicates with the robot controller via Ethernet.
This article presents contributions in the field of path planning for industrial robots with 6 degrees of freedom. This work presents the results of our research in the last 4 years at the Institute for Process Control and Robotics at the University of Karlsruhe. The path planning approach we present works in an implicit and discretized C-space. Collisions are detected in the Cartesian workspace by a hierarchical distance computation. The method is based on the A* search algorithm and needs no essential off-line computation. A new optimal discretization method leads to smaller search spaces, thus speeding up the planning. For a further acceleration, the search was parallelized. With a static load distribution good speedups can be achieved. By extending the algorithm to a bidirectional search, the planner is able to automatically select the easier search direction. The new dynamic switching of start and goal leads finally to the multi-goal path planning, which is able to compute a collision-free path between a set of goal poses (e.g., spot welding points) while minimizing the total path length.
The vibration induced in a deformable object upon automatic handling by robot manipulators can often be bothersome. This paper presents a force/torque sensor-based method for handling deformable linear objects (DLOs) in a manner suitable to eliminate acute vibration. An adjustment-motion that can be attached to the end of an arbitrary end-effector's trajectory is employed to eliminate vibration of deformable objects. Differently from model-based methods, the presented sensor-based method does not employ any information from previous motions. The adjustment-motion is generated automatically by analyzing data from a force/torque sensor mounted on the robot wrist. Template matching technique is used to find out the matching point between the vibrational signal of the DLO and a template. Experiments are conducted to test the new method under various conditions. Results demonstrate the effectiveness of the sensor-based adjustment-motion.
The task of handling non-rigid one-dimensional objects by a robot manipulation system is investigated. Especially, approaches to calculate motions with specific behavior in point contacts between the object and environment are regarded. For single point contacts, motions based on generalized rotations solving the direct and inverse manipulation problem are investigated. The latter problem is additionally tackled by simple rotation and translation motions. For double and multiple point contacts, motions based on Splines are suggested. In experimental results with steel springs, the predicted and measured effect for each approach are compared.
This paper addresses the problem of handling deformable linear objects (DLOs) in a suitable way to avoid acute vibration. Different types of adjustment-motions that eliminate vibration of deformable objects and can be attached to the end of an arbitrary end-effector trajectory are presented. For describing the dynamics of deformable linear objects, the finite element method is used to derive the dynamic differential equations. Genetic algorithm is used to find the optimal adjustment motion for each simulation example. Experiments are conducted to verify the presented manipulating method.
This paper addresses the problem of handling deformable linear objects (DLOs) in a suitable way to avoid acute vibration. An adjustment-motion that eliminates vibration of DLOs and can be attached to the end of any arbitrary end-effector's trajectory is presented, based on the concept of open-loop control. The presented adjustment-motion is a kind of agile end-effector motion with limited scope. To describe the dynamics of deformable linear objects, the finite element method is used to derive the dynamic differential equations. Genetic algorithm is used to find the optimal adjustment-motion for each simulation example. In contrast to previous approaches, the presented method can be treated as one of the manipulation skills and can be applied to different cases without major changes to the method.
The paper focuses on the problem of trajectory planning of flexible redundant robot manipulators (FRM) in joint space. Compared to irredundant flexible manipulators, FRMs present additional possibilities in trajectory planning due to their kinematics redundancy. A trajectory planning method to minimize vibration of FRMs is presented based on Genetic Algorithms (GAs). Kinematics redundancy is integrated into the presented method as a planning variable. Quadrinomial and quintic polynomials are used to describe the segments which connect the initial, intermediate, and final points in joint space. The trajectory planning of FRMs is formulated as a problem of optimization with constraints. A planar FRM with three flexible links is used in simulation. A case study shows that the method is applicable.
This paper deals with the handling of deformable linear objects (DLOs), such as hoses, wires or leaf springs. It investigates the a priori knowledge about the 6-dimensional force/torque signal for a changing contact situation between a DLO and a rigid polyhedral obstacle. The result is a complete list, containing for each contact change the most significant combination of force/torque signal components together with a description of the expected signal curve. This knowledge enables the reliable detection of changes in the DLO contact situation and with it the implementation of sensor-based manipulation skills for all possible contact changes.