Year of publication
- English (46) (remove)
- Manipulating Deformable Linear Objects: Programming using Different Manipulation Skills (2003)
- This paper describes motion primitives which solve some common recurrent problems encountered when manipulating deformable linear objects. As one example for the usefulness of these manipulations skills, the mounting of a leaf spring is presented here.
- Development of the First Force-Controlled Robot for Otoneurosurgery (2003)
- Objective: In some surgical specialties, e.g. orthopedics, robots are already used in the operating room for bony milling work. Oto- and otoneurosurgery may also greatly benefit by robotic enhanced precision. Study Design: Experimental study on robotic milling on oak wood and human temporal bone specimen. Methods: A standard industrial robot with a 6 degrees-of-freedom serial kinematics was used with force feedback to proportionally control the robot speed. Different milling modes and characteristic path parameters were evaluated to generate milling paths based on CAD geometry data of a cochlear implant and an implantable hearing system. Results: The best suited strategy proofed to be the spiral horizontal milling mode with the burr held perpendicularly to the temporal bone surface. In order to avoid high grooves, the distance in between paths should equal half the radius of the cutting burr head. Due to the vibration of the robot’s own motors, a rather high oscillation of the standard deviation of forces was encountered. This oscillation dropped drastically to nearly 0 N, when the burr head reached contact with the dura mater due to its damping characteristics. The cutting burr could be moved a long time on the dura without damaging it, because of its rather blunt head. The robot moved the burr very smoothly according to the encountered resistances. Conclusion: This is the first development of an functioning robotic milling procedure for otoneurosurgery with force-based speed control. It is planned to implement ultrasound-based local navigation and to perform robotic mastoidectomy.
- Manipulating Deformable Linear Objects: Characteristic Features for Vision-Based Detection of Contact State Transitions (2003)
- This paper deals with the handling of deformable linear objects (DLOs), such as hoses, wires, or leaf springs. It investigates usable features for the vision-based detection of a changing contact situation between a DLO and a rigid polyhedral obstacle and a classification of such contact state transitions. The result is a complete classification of contact state transitions and of the most significant features for each class. This knowledge enables reliable detection of changes in the DLO contact situation, facilitating implementation of sensor-based manipulation skills for all possible contact changes.
- A Hybrid Force Following Controller For Multi-Scale Motions (2003)
- In many robotic applications, the teaching of points in space is necessary to register the robot coordinate system with the one of the application. Robot-human interaction is awkward and dangerous for the human because of the possibly large size and power of the robot, so robot movements must be predictable and natural. We present a novel hybrid control algorithm which provides the needed precision in small scale movements while allowing for fast and intuitive large scale translations.
- Manipulating Deformable Linear Objects: Sensor-Based Fast Manipulation during Vibration (2002)
- It is difficult for robots to handle a vibrating deformable object. Even for human beings it is a high-risk operation to, for example, insert a vibrating linear object into a small hole. However, fast manipulation using a robot arm is not just a dream; it may be achieved if some important features of the vibration are detected online. In this paper, we present an approach for fast manipulation using a force/torque sensor mounted on the robot's wrist. Template matching method is employed to recognize the vibrational phase of the deformable objects. Therefore, a fast manipulation can be performed with a high success rate, even if there is acute vibration. Experiments inserting a deformable object into a hole are conducted to test the presented method. Results demonstrate that the presented sensor-based online fast manipulation is feasible.
- Virtual Robot Programming for Deformable Linear Objects: System concept and Prototype Implementation (2002)
- In this paper we present a method and system for robot programming using virtual reality techniques. The proposed method allows intuitive teaching of a manipulation task with haptic feedback in a graphical simulation system. Based on earlier work, our system allows even an operator who lacks specialized knowledge of robotics to automatically generate a robust sensor-based robot program that is ready to execute on different robots, merely by demonstrating the task in virtual reality.
- Manipulating Deformable Linear Objects: Manipulation Skill for Active Damping of Oscillations (2002)
- While handling deformable linear objects (DLOs), such as hoses, wires or leaf springs, with an industrial robot at high speed, unintended and undesired oscillations that delay further operations may occur. This paper analyzes oscillations based on a simple model with one degree of freedom (DOF) and presents a method for active open-loop damping. Different ways to interpret an oscillating DLO as a system with 1 DOF lead to translational and rotational adjustment motions. Both were implemented as a manipulation skill with a sepa-rate program that can be executed immediately after any robot motion. We showed how these manipulation skills can generate the needed adjustment motions automatically based on the readings of a wrist-mounted force/torque sensor. Experiments demonstrated the effectiveness under various conditions.
- Safe Human-Robot-Cooperation: Image-based Collision Detection for Industrial Robots (2002)
- This paper analyzes the problem of sensor-based colli-sion detection for an industrial robotic manipulator. A method to perform collision tests based on images taken from several stationary cameras in the work cell is pre-sented. The collision test works entirely based on the im-ages, and does not construct a representation of the Carte-sian space. It is shown how to perform a collision test for all possible robot configurations using only a single set of images taken simultaneously.
- Manipulating Deformable Linear Objects: Characteristics in Force Signals for Detecting Contact State Transitions (2001)
- This paper deals with the handling of deformable linear objects (DLOs), such as hoses, wires or leaf springs. It investigates the a priori knowledge about the 6-dimensional force/torque signal for a changing contact situation between a DLO and a rigid polyhedral obstacle. The result is a complete list, containing for each contact change the most significant combination of force/torque signal components together with a description of the expected signal curve. This knowledge enables the reliable detection of changes in the DLO contact situation and with it the implementation of sensor-based manipulation skills for all possible contact changes.
- Point-to-Point and Multi-Goal Path Planning for Industrial Robots (2001)
- This article presents contributions in the field of path planning for industrial robots with 6 degrees of freedom. This work presents the results of our research in the last 4 years at the Institute for Process Control and Robotics at the University of Karlsruhe. The path planning approach we present works in an implicit and discretized C-space. Collisions are detected in the Cartesian workspace by a hierarchical distance computation. The method is based on the A* search algorithm and needs no essential off-line computation. A new optimal discretization method leads to smaller search spaces, thus speeding up the planning. For a further acceleration, the search was parallelized. With a static load distribution good speedups can be achieved. By extending the algorithm to a bidirectional search, the planner is able to automatically select the easier search direction. The new dynamic switching of start and goal leads finally to the multi-goal path planning, which is able to compute a collision-free path between a set of goal poses (e.g., spot welding points) while minimizing the total path length.