In this paper a group of participants of the 12th European Summer Institute which took place in Tenerifa, Spain in June 1995 present their views on the state of the art and the future trends in Locational Analysis. The issue discussed includes modelling aspects in discrete, network and continuous location, heuristic techniques, the state of technology and undesirable facility location. Some general questions are stated reagrding the applicability of location models, promising research directions and the way technology affects the development of solution techniques.
With the burgeoning computing power available, multiscale modelling and simulation has these days become increasingly capable of capturing the details of physical processes on different scales. The mechanical behavior of solids is oftentimes the result of interaction between multiple spatial and temporal scales at different levels and hence it is a typical phenomena of interest exhibiting multiscale characteristic. At the most basic level, properties of solids can be attributed to atomic interactions and crystal structure that can be described on nano scale. Mechanical properties at the macro scale are modeled using continuum mechanics for which we mention stresses and strains. Continuum models, however they offer an efficient way of studying material properties they are not accurate enough and lack microstructural information behind the microscopic mechanics that cause the material to behave in a way it does. Atomistic models are concerned with phenomenon at the level of lattice thereby allowing investigation of detailed crystalline and defect structures, and yet the length scales of interest are inevitably far beyond the reach of full atomistic computation and is rohibitively expensive. This makes it necessary the need for multiscale models. The bottom line and a possible avenue to this end is, coupling different length scales, the continuum and the atomistics in accordance with standard procedures. This is done by recourse to the Cauchy-Born rule and in so doing, we aim at a model that is efficient and reasonably accurate in mimicking physical behaviors observed in nature or laboratory. In this work, we focus on concurrent coupling based on energetic formulations that links the continuum to atomistics. At the atomic scale, we describe deformation of the solid by the displaced positions of atoms that make up the solid and at the continuum level deformation of the solid is described by the displacement field that minimize the total energy. In the coupled model, continuum-atomistic, a continuum formulation is retained as the overall framework of the problem and the atomistic feature is introduced by way of constitutive description, with the Cauchy-Born rule establishing the point of contact. The entire formulation is made in the framework of nonlinear elasticity and all the simulations are carried out within the confines of quasistatic settings. The model gives direct account to measurable features of microstructures developed by crystals through sequential lamination.
This Dissertation tried to provide insights into the influences of individual and contextual factors on Technical and Vocational Education and Training (TVET) teachers’ learning and professional development in Ethiopia. Specifically, this research focused on identifying and determining the influences of teachers’ self perception as learners and professionals, and investigates the impact of the context, process and content of their learning and experiences on their professional development. The knowledge of these factors and their impacts help in improving the learning and professional development of the TVET teachers and their professionalization. This research tried to provide answers for the following five research questions. (1) How do TVET teachers perceive themselves as active learners and as professionals? And what are the implications of their perceptions on their learning and development? (2) How do TVET teachers engage themselves in learning and professional development activities? (3) What contextual factors facilitated or hindered the TVET Teachers’ learning and professional development? (4) Which competencies are found critical for the TVET teachers’ learning and professional development? (5) What actions need to be considered to enhance and sustain TVET teachers learning and professional development in their context? It is believed that the research results are significant not only to the TVET teachers, but also to schools leaders, TVET Teacher Training Institutions, education experts and policy makers, researchers and others stakeholders in the TVET sector. The theoretical perspectives adopted in this research are based on the systemic constructivist approach to professional development. An integrated approach to professional development requires that the teachers’ learning and development activities to be taken as an adult education based on the principles of constructivism. Professional development is considered as context - specific and long-term process in which teachers are trusted, respected and empowered as professionals. Teachers’ development activities are sought as more of collaborative activities portraying the social nature of learning. Schools that facilitate the learning and development of teachers exhibit characteristics of a learning organisation culture where, professional collaboration, collegiality and shared leadership are practiced. This research has drawn also relevant point of views from studies and reports on vocational education and TVET teacher education programs and practices at international, continental and national levels. The research objectives and the types of research questions in this study implied the use of a qualitative inductive research approach as a research strategy. Primary data were collected from TVET teachers in four schools using a one-on-one qualitative in-depth interview method. These data were analyzed using a Qualitative Content Analysis method based on the inductive category development procedure. ATLAS.ti software was used for supporting the coding and categorization process. The research findings showed that most of the TVET teachers neither perceive themselves as professionals nor as active learners. These perceptions are found to be one of the major barriers to their learning and development. Professional collaborations in the schools are minimal and teaching is sought as an isolated individual activity; a secluded task for the teacher. Self-directed learning initiatives and individual learning projects are not strongly evident. The predominantly teacher-centered approach used in TVET teacher education and professional development programs put emphasis mainly to the development of technical competences and has limited the development of a range of competences essential to teachers’ professional development. Moreover, factors such as the TVET school culture, the society’s perception of the teaching profession, economic conditions, and weak links with industries and business sectors are among the major contextual factors that hindered the TVET teachers’ learning and professional development. A number of recommendations are forwarded to improve the professional development of the TVET teachers. These include change in the TVET schools culture, a paradigm shift in TVET teacher education approach and practice, and development of educational policies that support the professionalization of TVET teachers. Areas for further theoretical research and empirical enquiry are also suggested to support the learning and professional development of the TVET teachers in Ethiopia.
A new and systematic approach to machine vision-based robot manipulation of deformable (non-rigid) linear objects is introduced. This approach reduces the computational needs by using a simple state-oriented model of the objects. These states describe the relation of the object with respect to an obstacle and are derived from the object image and its features. Therefore, the object is segmented from a standard video frame using a fast segmentation algorithm. Several object features are presented which allow the state recognition of the object while being manipulated by the robot.
A new and systematic basic approach to force- and vision-based robot manipulation of deformable (non-rigid) linear objects is introduced. This approach reduces the computational needs by using a simple state-oriented model of the objects. These states describe the relation between the deformable and rigid obstacles, and are derived from the object image and its features. We give an enumeration of possible contact states and discuss the main characteristics of each state. We investigate the performance of robust transitions between the contact states and derive criteria and conditions for each of the states and for two sensor systems, i.e. a vision sensor and a force/torque sensor. This results in a new and task-independent approach in regarding the handling of deformable objects and in a sensor-based implementation of manipulation primitives for industrial robots. Thus, the usage of sensor processing is an appropriate solution for our problem. Finally, we apply the concept of contact states and state transitions to the description of a typical assembly task. Experimental results show the feasibility of our approach: A robot performs several contact state transitions which can be combined for solving a more complex task.
A geoscientifically relevant wavelet approach is established for the classical (inner) displacement problem corresponding to a regular surface (such as sphere, ellipsoid, actual earth's surface). Basic tools are the limit and jump relations of (linear) elastostatics. Scaling functions and wavelets are formulated within the framework of the vectorial Cauchy-Navier equation. Based on appropriate numerical integration rules a pyramid scheme is developed providing fast wavelet transform (FWT). Finally multiscale deformation analysis is investigated numerically for the case of a spherical boundary.
The focus of this work has been to develop two families of wavelet solvers for the inner displacement boundary-value problem of elastostatics. Our methods are particularly suitable for the deformation analysis corresponding to geoscientifically relevant (regular) boundaries like sphere, ellipsoid or the actual Earth's surface. The first method, a spatial approach to wavelets on a regular (boundary) surface, is established for the classical (inner) displacement problem. Starting from the limit and jump relations of elastostatics we formulate scaling functions and wavelets within the framework of the Cauchy-Navier equation. Based on numerical integration rules a tree algorithm is constructed for fast wavelet computation. This method can be viewed as a first attempt to "short-wavelength modelling", i.e. high resolution of the fine structure of displacement fields. The second technique aims at a suitable wavelet approximation associated to Green's integral representation for the displacement boundary-value problem of elastostatics. The starting points are tensor product kernels defined on Cauchy-Navier vector fields. We come to scaling functions and a spectral approach to wavelets for the boundary-value problems of elastostatics associated to spherical boundaries. Again a tree algorithm which uses a numerical integration rule on bandlimited functions is established to reduce the computational effort. For numerical realization for both methods, multiscale deformation analysis is investigated for the geoscientifically relevant case of a spherical boundary using test examples. Finally, the applicability of our wavelet concepts is shown by considering the deformation analysis of a particular region of the Earth, viz. Nevada, using surface displacements provided by satellite observations. This represents the first step towards practical applications.
In this work the investigation of a (Ti, Al, Si) N system was done. The main point of investigation was to study the possibility of getting the nanocomposite coatings structures by deposition of multilayer films from TiN, AlSiN, . This tries to understand the relation between the mechanical properties (hardness, Young s modulus), and the microstructure (nanocrystalline with individual phases). Particularly special attention was given to the temperature effects on microstructural changes in annealing at 600 °C for the coatings. The surface hardness, elastic modulus, and the multilayers diffusion and compositions were the test tools for the comparison between the different coated samples with and without annealing at 600 °C. To achieve this object a rectangular aluminum vacuum chamber with three unbalanced sputtering magnetrons for the deposition of thin film coatings from different materials was constructed The chamber consists mainly of two chambers, the pre-vacuum chamber to load the workpiece, and the main vacuum chamber where the sputtering deposition of the thin film coatings take place. The workpiece is moving on a car travel on a railway between the two chambers to the position of the magnetrons by step motors. The chambers are divided by a self constructed rectangular gate controlled manually from outside the chamber. The chamber was sealed for vacuum use using glue and screws. Therefore, different types of glue were tested not only for its ability to develop an uniform thin layer in the gap between the aluminum plates to seal the chamber for vacuum use, but also low outgassing rates which made it suitable for vacuum use. A epoxy was able to fulfill this tasks. The evacuation characteristics of the constructed chamber was improved by minimizing the inner surface outgassing rate. Therefore, the throughput outgassing rate test method was used in the comparisons between the selected two aluminum materials (A2017 and A5353) samples short time period (one hour) outgassing rates. Different machining methods and treatments for the inner surface of the vacuum chamber were tested. The machining of the surface of material A (A2017) with ethanol as coolant fluid was able to reduce its outgassing rate a factor of 6 compared with a non-machined sample surface of the same material. The reduction of the surface porous oxide layer on the top of the aluminum surface by the pickling process with HNO3 acid, and the protection of it by producing another passive non-porous oxides layer using anodizing process will protect the surface for longer time and will minimize the outgassing rates even under humid atmosphere The residual gas analyzer (RGA) 6. Summary test shows that more than 85% of the gases inside the test chamber were water vapour (H2O) and the rests are (N2, H2, CO), so liquid nitrogen water vapor trap can enhance the chamber pumping down process. As a result it was possible to construct a chamber that can be pumped down using a turbo molecular pump (450 L/s) to the range of 1x10-6 mbar within one hour of evacuations where the chamber volume is 160 Litters and the inner surface area is 1.6 m2. This is a good base pressure for the process of sputtering deposition of hard thin film coatings. Multilayer thin film coating was deposited to demonstrate that nanostructured thin film within the (Ti, Al, Si) N system could be prepared by reactive magnetron sputtering of multi thin film layers of TiN, AlSiN. The (SNMS) spectrometry of the test samples show that a complete diffusion between the different deposited thin film coating layers in each sample takes place, even at low substrate deposition temperature. The high magnetic flux of the unbalanced magnetrons and the high sputtering power were able to produce a high ion-toatom flux, which give high mobility to the coated atoms. The interactions between the high mobility of the coated atoms and the ion-to-atom flux were sufficient to enhance the diffusion between the different deposited thin layers. It was shown from the XRD patterns for this system that the structure of the formed mixture consists of two phases. One phase is noted as TiN bulk and another detected unknown amorphous phase, which can be SiNx or AlN or a combination of Ti-Al-Si-N. As a result we where able to deposit a nanocomposite coatings by the deposition of multilayers from TiN, AlSiN thin film coatings using the constructed vacuum chamber
Self-adaptation allows software systems to autonomously adjust their behavior during run-time by handling all possible
operating states that violate the requirements of the managed system. This requires an adaptation engine that receives adaptation
requests during the monitoring process of the managed system and responds with an automated and appropriate adaptation
response. During the last decade, several engineering methods have been introduced to enable self-adaptation in software systems.
However, these methods lack addressing (1) run-time uncertainty that hinders the adaptation process and (2) the performance
impacts resulted from the complexity and the large number of the adaptation space. This paper presents CRATER, a framework
that builds an external adaptation engine for self-adaptive software systems. The adaptation engine, which is built on Case-based
Reasoning, handles the aforementioned challenges together. This paper is braced with an experiment illustrating the benefits of
this framework. The experimental results shows the potential of CRATER in terms handling run-time uncertainty and adaptation
remembrance that enhances the performance for large number of adaptation space.