This paper describes motion primitives which solve some common recurrent problems encountered when manipulating deformable linear objects. As one example for the usefulness of these manipulations skills, the mounting of a leaf spring is presented here.
While handling deformable linear objects (DLOs), such as hoses, wires or leaf springs, with an industrial robot at high speed, unintended and undesired oscillations that delay further operations may occur. This paper analyzes oscillations based on a simple model with one degree of freedom (DOF) and presents a method for active open-loop damping. Different ways to interpret an oscillating DLO as a system with 1 DOF lead to translational and rotational adjustment motions. Both were implemented as a manipulation skill with a sepa-rate program that can be executed immediately after any robot motion. We showed how these manipulation skills can generate the needed adjustment motions automatically based on the readings of a wrist-mounted force/torque sensor. Experiments demonstrated the effectiveness under various conditions.
Diese Arbeit beschreibt verschiedene Bewegungsprimitive zur Lösung einiger häufig auftre-tender Probleme bei der Handhabung von deformierbaren linearen Objekten. Anhand der beispielhaften Montage einer Feder wird die Nützlichkeit der verschiedenen Manipulation-Skills im einzelnen, aber auch deren Kombination dargestellt.
The paper focuses on the problem of point-to-point trajectory planning for flexible redundant robot manipulators (FRM) in joint space. Compared with irredundant flexible manipulators, a FRM possesses additional possibilities during point-to-point trajectory planning due to its kinematics redundancy. A trajectory planning method to minimize vibration and/or executing time of a point-to-point motion is presented for FRM based on Genetic Algorithms (GAs). Kinematics redundancy is integrated into the presented method as planning variables. Quadrinomial and quintic polynomial are used to describe the segments that connect the initial, intermediate, and final points in joint space. The trajectory planning of FRM is formulated as a problem of optimization with constraints. A planar FRM with three flexible links is used in simulation. Case studies show that the method is applicable.
This paper addresses the problem of handling deformable linear objects (DLOs) in a suitable way to avoid acute vibration. Different types of adjustment-motions that eliminate vibration of deformable objects and can be attached to the end of an arbitrary end-effector trajectory are presented. For describing the dynamics of deformable linear objects, the finite element method is used to derive the dynamic differential equations. Genetic algorithm is used to find the optimal adjustment motion for each simulation example. Experiments are conducted to verify the presented manipulating method.
The paper focuses on the problem of trajectory planning of flexible redundant robot manipulators (FRM) in joint space. Compared to irredundant flexible manipulators, FRMs present additional possibilities in trajectory planning due to their kinematics redundancy. A trajectory planning method to minimize vibration of FRMs is presented based on Genetic Algorithms (GAs). Kinematics redundancy is integrated into the presented method as a planning variable. Quadrinomial and quintic polynomials are used to describe the segments which connect the initial, intermediate, and final points in joint space. The trajectory planning of FRMs is formulated as a problem of optimization with constraints. A planar FRM with three flexible links is used in simulation. A case study shows that the method is applicable.
This paper deals with the handling of deformable linear objects (DLOs), such as hoses, wires or leaf springs. It investigates the a priori knowledge about the 6-dimensional force/torque signal for a changing contact situation between a DLO and a rigid polyhedral obstacle. The result is a complete list, containing for each contact change the most significant combination of force/torque signal components together with a description of the expected signal curve. This knowledge enables the reliable detection of changes in the DLO contact situation and with it the implementation of sensor-based manipulation skills for all possible contact changes.