### Refine

#### Year of publication

- 2015 (9) (remove)

#### Document Type

- Doctoral Thesis (8)
- Preprint (1)

#### Language

- English (9) (remove)

#### Keywords

- tractor (2)
- AMC225xe (1)
- Adaptive time step (1)
- Computational Homogenization (1)
- Computational Mechanics (1)
- Configurational Forces (1)
- Domain decomposition (1)
- Extended Kalman Filter (1)
- FEM (1)
- Finite-Elemente-Methode (1)

#### Faculty / Organisational entity

- Fachbereich Maschinenbau und Verfahrenstechnik (9) (remove)

In this contribution a mortar-type method for the coupling of non-conforming NURBS surface patches is proposed. The connection of non-conforming patches with shared degrees of freedom requires mutual refinement, which propagates throughout the whole patch due to the tensor-product structure of NURBS surfaces. Thus, methods to handle non-conforming meshes are essential in NURBS-based isogeometric analysis. The main objective of this work is to provide a simple and efficient way to couple the individual patches of complex geometrical models without altering the variational formulation. The deformations of the interface control points of adjacent patches are interrelated with a master-slave relation. This relation is established numerically using the weak form of the equality of mutual deformations along the interface. With the help of this relation the interface degrees of freedom of the slave patch can be condensated out of the system. A natural connection of the patches is attained without additional terms in the weak form. The proposed method is also applicable for nonlinear computations without further measures. Linear and geometrical nonlinear examples show the high accuracy and robustness of the new method. A comparison to reference results and to computations with the Lagrange multiplier method is given.

Accurate path tracking control of tractors became a key technology for automation in agriculture. Increasingly sophisticated solutions, however, revealed that accurate path tracking control of implements is at least equally important. Therefore, this work focuses on accurate path tracking control of both tractors and implements. The latter, as a prerequisite for improved control, are equipped with steering actuators like steerable wheels or a steerable drawbar, i.e. the implements are actively steered. This work contributes both new plant models and new control approaches for those kinds of tractor-implement combinations. Plant models comprise dynamic vehicle models accounting for forces and moments causing the vehicle motion as well as simplified kinematic descriptions. All models have been derived in a systematic and automated manner to allow for variants of implements and actuator combinations. Path tracking controller design begins with a comprehensive overview and discussion of existing approaches in related domains. Two new approaches have been proposed combining the systematic setup and tuning of a Linear-Quadratic-Regulator with the simplicity of a static output feedback approximation. The first approach ensures accurate path tracking on slopes and curves by including integral control for a selection of controlled variables. The second approach, instead, ensures this by adding disturbance feedforward control based on side-slip estimation using a non-linear kinematic plant model and an Extended Kalman Filter. For both approaches a feedforward control approach for curved path tracking has been newly derived. In addition, a straightforward extension of control accounting for the implement orientation has been developed. All control approaches have been validated in simulations and experiments carried out with a mid-size tractor and a custom built demonstrator implement.

This thesis deals with the development of a tractor front loader scale which measures payload continuously, independent of the center of gravity of the payload, and unaffected of the position and movements of the loader. To achieve this, a mathematic model of a common front loader is simplified which makes it possible to identify its parameters by a repeatable and automatic procedure. By measuring accelerations as well as cylinder forces, the payload is determined continuously during the working process. Finally, a prototype was build and the scale was tested on a tractor.

This thesis treats the application of configurational forces for the evaluation of fracture processes in Antarctic ice shelves. FE simulations are used to analyze the influence of geometric scales, material parameters and boundary conditions on single surface cracks. A break-up event at the Wilkins Ice Shelf that coincided with a major temperature drop motivates the consideration of frost wedging as a mechanism for ice shelf disintegration. An algorithm for the evaluation of the crack propagation direction is used to analyze the horizontal growth of rifts. Using equilibrium considerations for a viscoelastic fluid, a method is introduced to compute viscous volume forces from measured velocity fields as loads for a linear elastic fracture mechanical analysis.

Computational Homogenization of Piezoelectric Materials using FE² Methods and Configurational Forces
(2015)

Piezoelectric materials are electro-mechanically coupled materials. In these materials it is possible to produce an electric field by applying a mechanical load. This phenomenon is known as the piezoelectric effect. These materials also exhibit a mechanical deformation in response to an external electric loading, which is known as the inverse piezoelectric effect. By using these smart properties of piezoelectric materials, applications are possible in sensors and actuators. Ferroelectric or piezoelectric materials show switching behavior of the polarization in the material under an external loading. Due to this property, these materials are used to produce random access memory (RAM) for the non-volatile storage of data in computing devices. It is essential to understand the material responses of piezoelectric materials properly in order to use them in the engineering applications in innovative manners. Due to the growing interest in determining the material responses of smart material (e.g., piezoelectric material), computational methods are becoming increasingly important.
Many engineering materials possess inhomogeneities on the micro level. These inhomogeneities in the materials cause some difficulties in the determination of the material responses computationally as well as experimentally. But on the other hand, sometimes these inhomogeneities help the materials to render some good physical properties, e.g., glass or carbon fiber reinforced composites are light weight, but show higher strength. Piezoelectric materials also exhibit intense inhomogeneities on the micro level. These inhomogeneities are originating from the presence of domains, domain walls, grains, grain boundaries, micro cracks, etc. in the material. In order to capture the effects of the underlying microstructures on the macro quantities, it is essential to homogenize material parameters and the physical responses. There are several approaches to perform the homogenization. A two-scale classical (first-order) homogenization of electro-mechanically coupled materials using a FE²-approach is discussed in this work. The main objective of this work is to investigate the influences of the underlying micro structures on the macro Eshelby stress tensor and on the macro configurational forces. The configurational forces are determined in certain defect situations. These defect situations include the crack tip of a sharp crack in the macro specimen.
A literature review shows that the macro strain tensor is used to determine the micro boundary condition for the FE²-based homogenization in a small strain setting. This approach is capable to determine the consistent homogenized physical quantities (e.g., stress, strain) and the homogenized material quantities (e.g., stiffness tensor). But the application of these type of micro boundaries for the homogenization does not generate physically consistent macro Eshelby stress tensor or the macro configurational forces. Even in the absence of the micro volume configurational forces, this approach of the homogenization of piezoelectric materials produces unphysical volume configurational forces on the macro level. After a thorough investigation of the boundary conditions on the representative volume elements (RVEs), it is found that a displacement gradient driven micro boundary conditions remedy this issue. The use of the displacement gradient driven micro boundary conditions also satisfies the Hill-Mandel condition. The macro Eshelby stress tensor of a pure mechanical problem in a small deformation setting can be determined in two possible ways: by using the homogenized mechanical quantities (displacement gradient and stress tensor), or by homogenizing the Eshelby stress tensor on the micro level by volume averaging. The first approach does not satisfy the Hill-Mandel condition incorporating the Eshelby stress tensor in the energy term, on the other hand, the Hill-Mandel condition is satisfied in the second approach. In the case of homogenized Eshelby stress tensor determined from the homogenized physical quantities, the Hill-Mandel condition gives an additional energy term. A body in a small deformation setting is deformed according to the displacement gradient. If the homogenization is done using strain driven micro boundary conditions, the micro domain is deformed according to the macro strain, but the tiny vicinity around the corresponding Gauß point is deformed according to the macro displacement gradient. This implies that some restrictions are imposed at every Gauß point on the macro level. This situation helps the macro system to produce nonphysical volume configurational forces.
A FE²-based computational homogenization technique is also considered for the homogenization of piezoelectric materials. In this technique a representative volume element, which comprises of the micro structural features in the material, is assigned to every Gauß point of the macro domain. The macro displacement gradient and the macro electric field, or the macro stress tensor and the macro electric displacement are passed to the RVEs at every macro Gauß point. After determining boundary conditions on the RVEs, the homogenization process is performed. The homogenized physical quantities and the homogenized material parameters are passed back to macro Gauß points. In this work numerical investigations are carried out for two distinct situations of the microstructures of the piezoelectric materials regarding the evolution on the micro level: a) homogenization by using stationary microstructures, and b) homogenization by using evolving microstructures.
For the first case, the domain walls remain at fixed positions through out the simulations for the homogenization of piezoelectric materials. For a considerably large external loading, the real situation is different. But to understand the effects of the underlying microstructures on the macro configurational forces, to some extent it is sufficient to do the homogenization with fixed or stationary microstructures. The homogenization process is carried out for different microstructures and for different loading conditions. If the mechanical load is applied in the direction of the polarization, a smaller crack tip configurational force is observed in comparison to the configurational force determined for a mechanical loading perpendicular to the polarization. If the polarizations in the microstructures are parallel or perpendicular to the applied electric field and the applied displacement, configurational forces parallel to the crack ligament of the macro crack are observed only. In the case of inclined polarizations in the microstructures, configurational forces inclined to the crack ligament are obtained. The simulation results also reveal that an application of an external electric field to the material reduces the value of the nodal configurational forces at the crack tip.
In the second case, the interfaces of the micro structures are allowed to move from their initial positions at every step of the applied incremental external loading. Thus, at every step of the application of the external loading, the microstructures are changed when the external loading is larger than the coercive field. The movement of the interfaces is realized through the nodal configurational forces on the micro level. At every step of the application of the external loading, the nodal configurational forces per unit length on the domain walls are determined in the post-processing of the FE-simulation on the micro domain. With the help of the domain wall kinetics, the new positions of the domain walls are determined. Numerical results show that the crack tip region is the most affected area in the macro domain. For that reason a very different distribution of the macro electric displacement is observed comparing the same produced by using fixed microstructures. Due to the movement of the domain walls, the energy is dissipated in the system. As a result, a smaller configurational force appears at the crack tip on the macro level in the case of the homogenization by using evolving microstructures. By using the homogenization technique involving the evolution of the microstructures, it is possible to produce the electric displacement vs. electric field hysteresis loop on the macro level. The shape of the hysteresis loop depends on the value of the rate of application of the external electric loading. A faster deployment of the external electric field widens the hysteresis loop.

The present thesis describes the development and validation of a viscosity adaption method for the numerical simulation of non-Newtonian fluids on the basis of the Lattice Boltzmann Method (LBM), as well as the development and verification of the related software bundle SAM-Lattice.
By now, Lattice Boltzmann Methods are established as an alternative approach to classical computational fluid dynamics
methods. The LBM has been shown to be an accurate and efficient tool for the numerical simulation of weakly compressible or incompressible fluids. Fields of application reach from turbulent simulations through thermal problems to acoustic calculations among others. The transient nature of the method and the need for a regular grid based, non body conformal discretization makes the LBM ideally suitable for simulations involving complex solids. Such geometries are common, for instance, in the food processing industry, where fluids are mixed by static mixers or agitators. Those fluid flows are often laminar and non-Newtonian.
This work is motivated by the immense practical use of the Lattice Boltzmann Method, which is limited due to stability issues. The stability of the method is mainly influenced by the discretization and the viscosity of the fluid. Thus, simulations of non-Newtonian fluids, whose kinematic viscosity depend on the shear rate, are problematic. Several authors have shown that the LBM is capable of simulating those fluids. However, the vast majority of the simulations in the literature are carried out for simple geometries and/or moderate shear rates, where the LBM is still stable. Special care has to be taken for practical non-Newtonian Lattice Boltzmann simulations in order to keep them stable. A straightforward way is to truncate the modeled viscosity range by numerical stability criteria. This is an effective approach, but from the physical point of view the viscosity bounds are chosen arbitrarily. Moreover, these bounds depend on and vary with the grid and time step size and, therefore, with the simulation Mach number, which is freely chosen at the start of the simulation. Consequently, the modeled viscosity range may not fit to the actual range of the physical problem, because the correct simulation Mach number is unknown a priori. A way around is, to perform precursor simulations on a fixed grid to determine a possible time step size and simulation Mach number, respectively. These precursor simulations can be time consuming and expensive, especially for complex cases and a number of operating points. This makes the LBM unattractive for use in practical simulations of non-Newtonian fluids.
The essential novelty of the method, developed in the course of this thesis, is that the numerically modeled viscosity range is consistently adapted to the actual physically exhibited viscosity range through change of the simulation time step and the simulation Mach number, respectively, while the simulation is running. The algorithm is robust, independent of the Mach number the simulation was started with, and applicable for stationary flows as well as transient flows. The method for the viscosity adaption will be referred to as the "viscosity adaption method (VAM)" and the combination with LBM leads to the "viscosity adaptive LBM (VALBM)".
Besides the introduction of the VALBM, a goal of this thesis is to offer assistance in the spirit of a theory guide to students and assistant researchers concerning the theory of the Lattice Boltzmann Method and its implementation in SAM-Lattice. In Chapter 2, the mathematical foundation of the LBM is given and the route from the BGK approximation of the Boltzmann equation to the Lattice Boltzmann (BGK) equation is delineated in detail.
The derivation is restricted to isothermal flows only. Restrictions of the method, such as low Mach number flows are highlighted and the accuracy of the method is discussed.
SAM-Lattice is a C++ software bundle developed by the author and his colleague Dipl.-Ing. Andreas Schneider. It is a highly automated package for the simulation of isothermal flows of incompressible or weakly compressible fluids in 3D on the basis of the Lattice Boltzmann Method. By the time of writing of this thesis, SAM-Lattice comprises 5 components. The main components are the highly automated lattice generator SamGenerator and the Lattice Boltzmann solver SamSolver. Postprocessing is done with ParaSam, which is our extension of the
open source visualization software ParaView. Additionally, domain decomposition for MPI
parallelism is done by SamDecomposer, which makes use of the graph partitioning library MeTiS. Finally, all mentioned components can be controlled through a user friendly GUI (SamLattice) implemented by the author using QT, including features to visually track output data.
In Chapter 3, some fundamental aspects on the implementation of the main components, including the corresponding flow charts will be discussed. Actual details on the implementation are given in the comprehensive programmers guides to SamGenerator and SamSolver.
In order to ensure the functionality of the implementation of SamSolver, the solver is verified in Chapter 4 for Stokes's First Problem, the suddenly accelerated plate, and for Stokes's Second Problem, the oscillating plate, both for Newtonian fluids. Non-Newtonian fluids are modeled in SamSolver with the power-law model according to Ostwald de Waele. The implementation for non-Newtonian fluids is verified for the Hagen-Poiseuille channel flow in conjunction with a convergence analysis of the method. At the same time, the local grid refinement as it is implemented in SamSolver, is verified. Finally, the verification of higher order boundary conditions is done for the 3D Hagen-Poiseuille pipe flow for both Newtonian and non-Newtonian fluids.
In Chapter 5, the theory of the viscosity adaption method is introduced. For the adaption process, a target collision frequency or target simulation Mach number must be chosen and the distributions must be rescaled according to the modified time step size. A convenient choice is one of the stability bounds. The time step size for the adaption step is deduced from the target collision frequency \(\Omega_t\) and the currently minimal or maximal shear rate in the system, while obeying auxiliary conditions for the simulation Mach number. The adaption is done in the collision step of the Lattice Boltzmann algorithm. We use the transformation matrices of the MRT model to map from distribution space to moment space and vice versa. The actual scaling of the distributions is conducted on the back mapping, because we use the transformation matrix on the basis of the new adaption time step size. It follows an additional rescaling of the non-equilibrium part of the distributions, because of the form of the definition for the discrete stress tensor in the LBM context. For that reason it is clear, that the VAM is applicable for the SRT model as well as the MRT model, where there is virtually no extra cost in the latter case. Also, in Chapter 5, the multi level treatment will be discussed.
Depending on the target collision frequency and the target Mach number, the VAM can be used to optimally use the viscosity range that can be modeled within the stability bounds or it can be used to drastically accelerate the simulation. This is shown in Chapter 6. The viscosity adaptive LBM is verified in the stationary case for the Hagen-Poiseuille channel flow and in the transient case for the Wormersley flow, i.e., the pulsatile 3D Hagen-Poiseuille pipe flow. Although, the VAM is used here for fluids that can be modeled with the power-law approach, the implementation of the VALBM is straightforward for other non-Newtonian models, e.g., the Carreau-Yasuda or Cross model. In the same chapter, the VALBM is validated for the case of a propeller viscosimeter developed at the chair SAM. To this end, the experimental data of the torque on the impeller of three shear thinning non-Newtonian liquids serve for the validation. The VALBM shows excellent agreement with experimental data for all of the investigated fluids and in every operating point. For reasons of comparison, a series of standard LBM simulations is carried out with different simulation Mach numbers, which partly show errors of several hundred percent. Moreover, in Chapter 7, a sensitivity analysis on the parameters used within the VAM is conducted for the simulation of the propeller viscosimeter.
Finally, the accuracy of non-Newtonian Lattice Boltzmann simulations with the SRT and the MRT model is analyzed in detail. Previous work for Newtonian fluids indicate that depending on the numerical value of the collision frequency \(\Omega\), additional artificial viscosity is introduced due to the finite difference scheme, which negatively influences the accuracy. For the non-Newtonian case, an error estimate in the form of a functional is derived on the basis of a series expansion of the Lattice Boltzmann equation. This functional can be solved analytically for the case of the Hagen-Poiseuille channel flow of non-Newtonian fluids. The estimation of the error minimum is excellent in regions where the \(\Omega\) error is the dominant source of error as opposed to the compressibility error.
Result of this dissertation is a verified and validated software bundle on the basis of the viscosity adaptive Lattice Boltzmann Method. The work restricts itself on the simulation of isothermal, laminar flows with small Mach numbers. As further research goals, the testing of the VALBM with minimal error estimate and the investigation of the VALBM in the case of turbulent flows is suggested.

A Consistent Large Eddy Approach for Lattice Boltzmann Methods and its Application to Complex Flows
(2015)

Lattice Boltzmann Methods have shown to be promising tools for solving fluid flow problems. This is related to the advantages of these methods, which are among others, the simplicity in handling complex geometries and the high efficiency in calculating transient flows. Lattice Boltzmann Methods are mesoscopic methods, based on discrete particle dynamics. This is in contrast to conventional Computational Fluid Dynamics methods, which are based on the solution of the continuum equations. Calculations of turbulent flows in engineering depend in general on modeling, since resolving of all turbulent scales is and will be in near future far beyond the computational possibilities. One of the most auspicious modeling approaches is the large eddy simulation, in which the large, inhomogeneous turbulence structures are directly computed and the smaller, more homogeneous structures are modeled.
In this thesis, a consistent large eddy approach for the Lattice Boltzmann Method is introduced. This large eddy model includes, besides a subgrid scale model, appropriate boundary conditions for wall resolved and wall modeled calculations. It also provides conditions for turbulent domain inlets. For the case of wall modeled simulations, a two layer wall model is derived in the Lattice Boltzmann context. Turbulent inlet conditions are achieved by means of a synthetic turbulence technique within the Lattice Boltzmann Method.
The proposed approach is implemented in the Lattice Boltzmann based CFD package SAM-Lattice, which has been created in the course of this work. SAM-Lattice is feasible of the calculation of incompressible or weakly compressible, isothermal flows of engineering interest in complex three dimensional domains. Special design targets of SAM-Lattice are high automatization and high performance.
Validation of the suggested large eddy Lattice Boltzmann scheme is performed for pump intake flows, which have not yet been treated by LBM. Even though, this numerical method is very suitable for this kind of vortical flows in complicated domains. In general, applications of LBM to hydrodynamic engineering problems are rare. The results of the pump intake validation cases reveal that the proposed numerical approach is able to represent qualitatively and quantitatively the very complex flows in the intakes. The findings provided in this thesis can serve as the basis for a broader application of LBM in hydrodynamic engineering problems.

An efficient multiscale approach is established in order to compute the macroscopic response of nonlinear composites. The micro problem is rewritten in an integral form of the Lippmann-Schwinger type and solved efficiently by Fast Fourier Transforms. Using realistic microstructure models complex nonlinear effects are reproduced and validated with measured data of fiber reinforced plastics. The micro problem is integrated in a Finite Element framework which is used to solve the macroscale. The scale coupling technique and a consistent numerical algorithm is established. The method provides an efficient way to determine the macroscopic response considering arbitrary microstructures, constitutive behaviors and loading conditions.

On the Extended Finite Element Method for the Elasto-Plastic Deformation of Heterogeneous Materials
(2015)

This thesis is concerned with the extended finite element method (XFEM) for deformation analysis of three-dimensional heterogeneous materials. Using the "enhanced abs enrichment" the XFEM is able to reproduce kinks in the displacements and therewith jumps in the strains within elements of the underlying tetrahedral finite element mesh. A complex model for the micro structure reconstruction of aluminum matrix composite AMC225xe and the modeling of its macroscopic thermo-mechanical plastic deformation behavior is presented, using the XFEM. Additionally, a novel stabilization algorithm is introduced for the XFEM. This algorithm requires preprocessing only.