Ein fundamentaler Schritt des fallbasierten Schliessens (FBS) ist das Retrieval einer handhabbaren Menge von Fällen aus einer Fallbasis, die als Grundlage für die weiteren Schritte des FBS, wie die Modifikation und Übertragung bekannter Lösungen auf einen gegebenen Problemfall, dienen.

Based on experiences from an autonomous mobile robot project called MOBOT -III, we found hard realtime-constraints for the operating-system-design. ALBATROSS is "A flexible multi-tasking and realtime network-operatingsystem-kernel", not limited to mobile- robot-projects only, but which might be useful also wherever you have to guarantee a high reliability of a realtime-system. The focus in this article is on a communication-scheme fulfilling the demanded (hard realtime-) assurances although not implying time-delays or jitters on the critical informationchannels. The central chapters discuss a locking-free shared buffer management, without the need for interrupts and a way to arrange the communication architecture in order to produce minimal protocol-overhead and short cycle-times. Most of the remaining communication-capacity (if there is any) is used for redundant transfers, increasing the reliability of the whole system. ALBATROSS is actually implemented on a multi-processor VMEbus-system.

The problem to be discussed here, is the usage of neural network clustering techniques on a mobile robot, in order to build qualitative topologic environment maps. This has to be done in realtime, i.e. the internal world model has to be adapted by the flow of sensor- samples without the possibility to stop this data-flow.Our experiments are done in a simulation environment as well as on a robot, called ALICE.

Based on the idea of using topologic feature-mapsinstead of geometric environment maps in practical mobile robot tasks, we show an applicable way tonavigate on such topologic maps. The main features regarding this kind of navigation are: handling of very inaccurate position (and orientation) information as well as implicit modelling of complex kinematics during an adaptation phase. Due to the lack of proper a-priori knowledge, a re-inforcement based model is used for the translation of navigator commands to motor actions. Instead of employing a backpropagation network for the cen-tral associative memory module (attaching actionprobabilities to sensor situations resp. navigatorcommands) a much faster dynamic cell structure system based on dynamic feature maps is shown. Standard graph-search heuristics like A* are applied in the planning phase.

World models for mobile robots as introduced in many projects, are mostly redundant regarding similar situations detected in different places. The present paper proposes a method for dynamic generation of a minimal world model based on these redundancies. The technique is an extention of the qualitative topologic world modelling methods. As a central aspect the reliability regarding errortolerance and stability will be emphasized. The proposed technique demands very low constraints on the kind and quality of the employed sensors as well as for the kinematic precision of the utilized mobile platform. Hard realtime constraints can be handled due to the low computational complexity. The principal discussions are supported by real-world experiments with the mobile robot "

Self-localization in unknown environments respectively correlation of current and former impressions of the world is an essential ability for most mobile robots. The method,proposed in this article is the construction of a qualitative, topological world model as a basis for self-localization. As a central aspect the reliability regarding error-tolerance and stability will be emphasized. The proposed techniques demand very low constraints for the kind and quality of the employed sensors as well as for the kinematic precisionof the utilized mobile platform. Hard real-time constraints can be handled due to the low computational complexity. The principal discussions are supported by real-world experiments with the mobile robot.

Planar force or pressure is a fundamental physical aspect during any people-vs-people and people-vs-environment activities and interactions. It is as significant as the more established linear and angular acceleration (usually acquired by inertial measurement units). There have been several studies involving planar pressure in the discipline of activity recognition, as reviewed in the first chapter. These studies have shown that planar pressure is a promising sensing modality for activity recognition. However, they still take a niche part in the entire discipline, using ad hoc systems and data analysis methods. Mostly these studies were not followed by further elaborative works. The situation calls for a general framework that can help push planar pressure sensing into the mainstream. This dissertation systematically investigates using planar pressure distribution sensing technology for ubiquitous and wearable activity recognition purposes. We propose a generic Textile Pressure Mapping (TPM) Framework, which encapsulates (1) design knowledge and guidelines, (2) a multi-layered tool including hardware, software and algorithms, and (3) an ensemble of empirical study examples. Through validation with various empirical studies, the unified TPM framework covers the full scope of application recognition, including the ambient, object, and wearable subspaces. The hardware part constructs a general architecture and implementations in the large-scale and mobile directions separately. The software toolkit consists of four heterogeneous tiers: driver, data processing, machine learning, visualization/feedback. The algorithm chapter describes generic data processing techniques and a unified TPM feature set. The TPM framework offers a universal solution for other researchers and developers to evaluate TPM sensing modality in their application scenarios. The significant findings from the empirical studies have shown that TPM is a versatile sensing modality. Specifically, in the ambient subspace, a sports mat or carpet with TPM sensors embedded underneath can distinguish different sports activities or different people's gait based on the dynamic change of body-print; a pressure sensitive tablecloth can detect various dining actions by the force propagated from the cutlery through the plates to the tabletop. In the object subspace, swirl office chairs with TPM sensors under the cover can be used to detect the seater's real-time posture; TPM can be used to detect emotion-related touch interactions for smart objects, toys or robots. In the wearable subspace, TPM sensors can be used to perform pressure-based mechanomyography to detect muscle and body movement; it can also be tailored to cover the surface of a soccer shoe to distinguish different kicking angles and intensities. All the empirical evaluations have resulted in accuracies well-above the chance level of the corresponding number of classes, e.g., the `swirl chair' study has classification accuracy of 79.5% out of 10 posture classes and in the `soccer shoe' study the accuracy is 98.8% among 17 combinations of angle and intensity.

As a Software Product Line (SPL) evolves with increasing number of features and feature values, the feature correlations become extremely intricate, and the specifications of these correlations tend to be either incomplete or inconsistent with their realizations, causing misconfigurations in practice. In order to guide product configuration processes, we present a solution framework to recover complex feature correlations from existing product configurations. These correlations are further pruned automatically and validated by domain experts. During implementation, we use association mining techniques to automatically extract strong association rules as potential feature correlations. This approach is evaluated using a large-scale industrial SPL in the embedded system domain, and finally we identify a large number of complex feature correlations.