### Refine

#### Year of publication

- 2007 (37) (remove)

#### Document Type

- Report (37) (remove)

#### Keywords

- numerical upscaling (4)
- Dienstgüte (3)
- Darcy’s law (2)
- Formalisierung (2)
- effective heat conductivity (2)
- hub location (2)
- single phase flow (2)
- 3D (1)
- Ad-hoc-Netz (1)
- Asymptotic Expansion (1)

#### Faculty / Organisational entity

The provision of quality-of-service (QoS) on the network layer is a major challenge in communication networks. This applies particularly to mobile ad-hoc networks (MANETs) in the area of Ambient Intelligence (AmI), especially with the increasing use of delay and bandwidth sensitive applications. The focus of this survey lies on the classification and analysis of selected QoS routing protocols in the domain of mobile ad-hoc networks. Each protocol is briefly described and assessed, and the results are summarized in multiple tables.

Guaranteeing correctness of compilation is a ma jor precondition for correct software. Code generation can be one of the most error-prone tasks in a compiler. One way to achieve trusted compilation is certifying compilation. A certifying compiler generates for each run a proof that it has performed the compilation run correctly. The proof is checked in a separate theorem prover. If the theorem prover is content with the proof, one can be sure that the compiler produced correct code. This paper presents a certifying code generation phase for a compiler translating an intermediate language into assembler code. The time spent for checking the proofs is the bottleneck of certifying compilation. We exhibit an improved framework for certifying compilation and considerable advances to overcome this bottleneck. We compare our implementation featuring the Coq theorem prover to an older implementation. Our current implementation is feasible for medium to large sized programs.

Abstraction is intensively used in the verification of large, complex or infinite-state systems. With abstractions getting more complex it is often difficult to see whether they are valid. However, for using abstraction in model checking it has to be ensured that properties are preserved. In this paper, we use a translation validation approach to verify property preservation of system abstractions. We formulate a correctness criterion based on simulation between concrete and abstract system for a property to be verified. For each distinct run of the abstraction procedure the correctness is verified in the theorem prover Isabelle/HOL. This technique is applied in the verification of embedded adaptive systems. This paper is an extended version a previously published work.

In this paper, a stochastic model [5] for the turbulent fiber laydown in the industrial production of nonwoven materials is extended by including a moving conveyor belt. In the hydrodynamic limit corresponding to large noise values, the transient and stationary joint probability distributions are determined using the method of multiple scales and the Chapman-Enskog method. Moreover, exponential convergence towards the stationary solution is proven for the reduced problem. For special choices of the industrial parameters, the stochastic limit process is an Ornstein{Uhlenbeck. It is a good approximation of the fiber motion even for moderate noise values. Moreover, as shown by Monte{Carlo simulations, the limiting process can be used to assess the quality of nonwoven materials in the industrial application by determining distributions of functionals of the process.

This work presents a new framework for Gröbner basis computations with Boolean polynomials. Boolean polynomials can be modeled in a rather simple way, with both coefficients and degree per variable lying in {0, 1}. The ring of Boolean polynomials is, however, not a polynomial ring, but rather the quotient ring of the polynomial ring over the field with two elements modulo the field equations x2 = x for each variable x. Therefore, the usual polynomial data structures seem not to be appropriate for fast Gröbner basis computations. We introduce a specialized data structure for Boolean polynomials based on zero-suppressed binary decision diagrams (ZDDs), which is capable of handling these polynomials more efficiently with respect to memory consumption and also computational speed. Furthermore, we concentrate on high-level algorithmic aspects, taking into account the new data structures as well as structural properties of Boolean polynomials. For example, a new useless-pair criterion for Gröbner basis computations in Boolean rings is introduced. One of the motivations for our work is the growing importance of formal hardware and software verification based on Boolean expressions, which suffer – besides from the complexity of the problems – from the lack of an adequate treatment of arithmetic components. We are convinced that algebraic methods are more suited and we believe that our preliminary implementation shows that Gröbner bases on specific data structures can be capable to handle problems of industrial size.

The provision of network Quality-of-Service (network QoS) in wireless (ad-hoc) networks is a major challenge in the development of future communication systems. Before designing and implementing these systems, the network QoS requirements are to be specified. Existing approaches to the specification of network QoS requirements are mainly focused on specific domains or individual system layers. In this paper, we present a holistic, comprehensive formalization of network QoS requirements, across layers. QoS requirements are specified on each layer by defining QoS domain, consisting of QoS performance, reliability, and guarantee, and QoS scalability, with utility and cost functions. Furthermore, we derive preorders on multi-dimensional QoS domains, and present criteria to reduce these domains, leading to a manageable subset of QoS values that is sufficient for system design and implementation. We illustrate our approach by examples from the case study Wireless Video Transmission.

The provision of network Quality-of-Service (network QoS) in wireless (ad-hoc) networks is a major challenge in the development of future communication systems. Before designing and implementing these systems, the network QoS requirements are to be specified. Since QoS functionalities are integrated across layers and hence QoS specifications exist on different system layers, a QoS mapping technique is needed to translate the specifications into each other. In this paper, we formalize the relationship between layers. Based on a comprehensive and holistic formalization of network QoS requirements, we define two kinds of QoS mappings. QoS domain mappings associate QoS domains of two abstraction levels. QoS scalability mappings associate utility and cost functions of two abstraction levels. We illustrate our approach by examples from the case study Wireless Video Transmission.

The performance of oil filters used in the automotive industry can be significantly improved, especially when computer simulation is an essential component of the design process. In this paper, we consider parallel numerical algorithms for solving mathematical models describing the process of filtration, filtering out solid particles from liquid oil. The Navier-Stokes-Brinkmann system of equations is used to describe the laminar flow of incompressible isothermal oil. The space discretization in the complicated filter geometry is based on the finite-volume method. Special care is taken for an accurate approximation of velocity and pressure on the interface between the fluid and the porous media. The time discretization used here is a proper modification of the fractional time step discretization (cf. Chorin scheme) of the Navier-Stokes equations, where the Brinkmann term is considered at both, prediction and correction substeps. A data decomposition method is used to develop a parallel algorithm, where the domain is distributed among processors by using a structured reference grid. The MPI library is used to implement the data communication part of the algorithm. A theoretical model is proposed for the estimation of the complexity of the given parallel algorithm and a scalability analysis is done on the basis of this model. Results of computational experiments are presented, and the accuracy and efficiency of the parallel algorithm is tested on real industrial geometries.

In this paper we propose a general approach solution method for the single facility ordered median problem in the plane. All types of weights (non-negative, non-positive, and mixed) are considered. The big triangle small triangle approach is used for the solution. Rigorous and heuristic algorithms are proposed and extensively tested on eight different problems with excellent results.

Two-level domain decomposition preconditioner for 3D flows in anisotropic highly heterogeneous porous media is presented. Accurate finite volume discretization based on multipoint flux approximation (MPFA) for 3D pressure equation is employed to account for the jump discontinuities of full permeability tensors. DD/MG type preconditioner for above mentioned problem is developed. Coarse scale operator is obtained from a homogenization type procedure. The influence of the overlapping as well as the influence of the smoother and cell problem formulation is studied. Results from numerical experiments are presented and discussed.

An efficient approach for calculating the effective heat conductivity for a class of industrial composite materials, such as metal foams, fibrous glass materials, and the like, is discussed. These materials, used in insulation or in advanced heat exchangers, are characterized by a low volume fraction of the highly conductive material (glass or metal) having a complex, network-like structure and by a large volume fraction of the insulator (air). We assume that the composite materials have constant macroscopic thermal conductivity tensors, which in principle can be obtained by standard up-scaling techniques, that use the concept of representative elementary volumes (REV), i.e. the effective heat conductivities of composite media can be computed by post-processing the solutions of some special cell problems for REVs. We propose, theoretically justify, and numerically study an efficient approach for calculating the effective conductivity for media for which the ratio of low and high conductivities satisfies 1. In this case one essentially only needs to solve the heat equation in the region occupied by the highly conductive media. For a class of problems we show, that under certain conditions on the microscale geometry, the proposed approach produces an upscaled conductivity that is O() close to the exact upscaled permeability. A number of numerical experiments are presented in order to illustrate the accuracy and the limitations of the proposed method. Applicability of the presented approach to upscaling other similar problems, e.g. flow in fractured porous media, is also discussed.

This paper deals with the problem of determining the sea surface topography from geostrophic flow of ocean currents on local domains of the spherical Earth. In mathematical context the problem amounts to the solution of a spherical differential equation relating the surface curl gradient of a scalar field (sea surface topography) to a surface divergence-free vector field(geostrophic ocean flow). At first, a continuous solution theory is presented in the framework of an integral formula involving Green’s function of the spherical Beltrami operator. Different criteria derived from spherical vector analysis are given to investigate uniqueness. Second, for practical applications Green’s function is replaced by a regularized counterpart. The solution is obtained by a convolution of the flow field with a scaled version of the regularized Green function. Calculating locally without boundary correction would lead to errors near the boundary. To avoid these Gibbs phenomenona we additionally consider the boundary integral of the corresponding region on the sphere which occurs in the integral formula of the solution. For reasons of simplicity we discuss a spherical cap first, that means we consider a continuously differentiable (regular) boundary curve. In a second step we concentrate on a more complicated domain with a non continuously differentiable boundary curve, namely a rectangular region. It will turn out that the boundary integral provides a major part for stabilizing and reconstructing the approximation of the solution in our multiscale procedure.

Von sicherheitsrelevanten Bauteilen im Automobilbau verlangt man, dass beim Kunden bis zur Zeit/Strecke q0 höchstens ein Anteil p0 ausgefallen ist. Die Verifikation dieses Quantils geschieht in einer Reihe von Versuchen, bei denen die Bauteile mit einer typischen Kraft zyklisch belastet werden, bis ein gewisses, im Vorfeld festgelegtes, Schadensbild auftritt und die Anzahl Ti der Zyklen („Schwingspiele“) als Lebensdauer notiert wird. Typischerweise ist der Stichprobenumfang N dabei sehr gering (N < 10), während gleichzeitig ein extremes Quantil 0 p0 0, 1 verifiziert werden soll. Verwendet man als Lebensdauerverteilung eine Weibulloder Lognormalverteilung, so tritt in den Quantilschätzern ein deutlicher Bias auf, der beseitigt werden soll. Da es sich hierbei in der Regel um einen positiven Bias handelt, würde man Bauteile als serientauglich einstufen, obwohl sie möglicherweise deutlich unter den Vorgaben liegen. Die Berechnung von Konfidenzintervallen für Quantile geschieht über Delta-Methoden, die ebenfalls schlechte Resultate liefern (in Form einer zu geringen empirischen Signifikanz linksseiter Intervalle). Im Folgenden werden Verallgemeinerungen der Bootstrap- und Jackknife- Biaskorrektur vorgestellt, welche nicht nur versuchen den Bias zu beseitigen, sondern direkt den mittleren quadratischen Fehler des Schätzers weitestgehend zu reduzieren. Simulationsstudien zeigen, dass dies für geringe Stichprobenumfänge gelingt. Außerdem wird untersucht, inwiefern die Methode in Kombination mit der Bootstrap-Quantil-Methode einen verbesserten Intervallschätzer für Quantile liefert. Dabei werden simulierte Daten betrachtet, deren Parameter repräsentativ für Lebensdauerverteilungen von sicherheitsrelevanten Bauteilen sind.

In this expository article, we give an introduction into the basics of bootstrap tests in general. We discuss the residual-based and the wild bootstrap for regression models suitable for applications in signal and image analysis. As an illustration of the general idea, we consider a particular test for detecting differences between two noisy signals or images which also works for noise with variable variance. The test statistic is essentially the integrated squared difference between the signals after denoising them by local smoothing. Determining its quantile, which marks the boundary between accepting and rejecting the hypothesis of equal signals, is hardly possible by standard asymptotic methods whereas the bootstrap works well. Applied to the rows and columns of images, the resulting algorithm not only allows for the detection of defects but also for the characterization of their location and shape in surface inspection problems.

In this paper, a new mixed integer mathematical programme is proposed for the application of Hub Location Problems (HLP) in public transport planning. This model is among the few existing ones for this application. Some classes of valid inequalities are proposed yielding a very tight model. To solve instances of this problem where existing standard solvers fail, two approaches are proposed. The first one is an exact accelerated Benders decomposition algorithm and the latter a greedy neighborhood search. The computational results substantiate the superiority of our solution approaches to existing standard MIP solvers like CPLEX, both in terms of computational time and problem instance size that can be solved. The greedy neighborhood search heuristic is shown to be extremely efficient.

Abstract. The stationary, isothermal rotational spinning process of fibers is considered. The investigations are concerned with the case of large Reynolds (± = 3/Re ¿ 1) and small Rossby numbers (\\\" ¿ 1). Modelling the fibers as a Newtonian fluid and applying slender body approximations, the process is described by a two–point boundary value problem of ODEs. The involved quantities are the coordinates of the fiber’s centerline, the fluid velocity and viscous stress. The inviscid case ± = 0 is discussed as a reference case. For the viscous case ± > 0 numerical simulations are carried out. Transfering some properties of the inviscid limit to the viscous case, analytical bounds for the initial viscous stress of the fiber are obtained. A good agreement with the numerical results is found. These bounds give strong evidence, that for ± > 3\\\"2 no physical relevant solution can exist. A possible interpretation of the above coupling of ± and \\\" related to the die–swell phenomenon is given.

Bringing robustness to patient flow management through optimized patient transports in hospitals
(2007)

Intra-hospital transports are often required for diagnostic or therapeutic reasons. Depending on the hospital layout, transportation between nursing wards and service units is either provided by ambulances or by trained personnel who accompany patients on foot. In many large German hospitals, the patient transport service is poorly managed and lacks workflow coordination. This contributes to higher hospital costs (e.g. when a patient is not delivered to the operating room on time) and to patient inconvenience due to longer waiting times. We have designed a computer-based planning system - Opti-TRANS c - that supports all phases of the transportation flow, ranging from travel booking, dispatching transport requests to monitoring and reporting trips in real-time. The methodology developed to solve the underlying optimization problem - a dynamic dial-a-ride problem with hospital-specific constraints - draws on fast heuristic methods to ensure the efficient and timely provision of transports. We illustrate the strong impact of Opti-TRANS c on the daily performance of the patient transportation service of a large German hospital. The major benefits obtained with the new tool include streamlined transportation processes and workflow, significant savings and improved patient satisfaction. Moreover, the new planning system has contributed to increase awareness among hospital staff about the importance of implementing efficient logistics practices.

With the ever-increasing significance of software in our everyday lives, it is vital to afford reliable software quality estimates. Typically, quantitative software quality analyses rely on either statistical fault prediction methods (FPMs) or stochastic software reliability growth models (SRGMs). Adopting solely FPMs or SRGMs, though, may result in biased predictions that do not account for uncertainty in the distinct prediction methods; thus rendering the prediction less reliable. This paper identifies flaws of the individual prediction methods and suggests a hybrid prediction approach that combines FPMs and SRGMs. We adopt FPMs for initially estimating the expected number of failures for fi- nite failure SRGMs. Initial parameter estimates yield more accurate reliability predictions until sufficient failures are observed that enable stable parameter estimates in SRGMs. Being at the equilibrium level of FPM and SRGM pre- dictions we suggest combining the competing prediction methods with respect to the principle of heterogeneous redundancy. That is, we propose using the in- dividual methods separately and combining their predictions. In this paper we suggest Bayesian model averaging (BMA) for combining the different methods. The hybrid approach allows early reliability estimates and encourages higher confidence in software quality predictions.

Abstract — Various advanced two-level iterative methods are studied numerically and compared with each other in conjunction with finite volume discretizations of symmetric 1-D elliptic problems with highly oscillatory discontinuous coefficients. Some of the methods considered rely on the homogenization approach for deriving the coarse grid operator. This approach is considered here as an alternative to the well-known Galerkin approach for deriving coarse grid operators. Different intergrid transfer operators are studied, primary consideration being given to the use of the so-called problemdependent prolongation. The two-grid methods considered are used as both solvers and preconditioners for the Conjugate Gradient method. The recent approaches, such as the hybrid domain decomposition method introduced by Vassilevski and the globallocal iterative procedure proposed by Durlofsky et al. are also discussed. A two-level method converging in one iteration in the case where the right-hand side is only a function of the coarse variable is introduced and discussed. Such a fast convergence for problems with discontinuous coefficients arbitrarily varying on the fine scale is achieved by a problem-dependent selection of the coarse grid combined with problem-dependent prolongation on a dual grid. The results of the numerical experiments are presented to illustrate the performance of the studied approaches.

A numerical upscaling approach, NU, for solving multiscale elliptic problems is discussed. The main components of this NU are: i) local solve of auxil- iary problems in grid blocks and formal upscaling of the obtained re sults to build a coarse scale equation; ii) global solve of the upscaled coarse scale equation; and iii) reconstruction of a fine scale solution by solving local block problems on a dual coarse grid. By its structure NU is similar to other methods for solving multiscale elliptic problems, such as the multiscale finite element method, the multiscale mixed finite element method, the numerical subgrid upscaling method, heterogeneous multiscale method, and the multiscale finite volume method. The difference with those methods is in the way the coarse scale equation is build and solved, and in the way the fine scale solution is reconstructed. Essential components of the presented here NU approach are the formal homogenization in the coarse blocks and the usage of so called multipoint flux approximation method, MPFA. Unlike the usual usage as MPFA as a discretiza- tion method for single scale elliptic problems with tensor discontinuous coefficients, we consider its usage as a part of a numerical upscaling approach. The main aim of this paper is to compare NU with the MsFEM. In particular, it is shown that the resonance effect, which limits the application of the Multiscale FEM, does not appear, or it is significantly relaxed, when the presented here numerical upscaling approach is applied.