### Refine

#### Year of publication

- 2005 (31) (remove)

#### Document Type

- Doctoral Thesis (31) (remove)

#### Language

- English (31) (remove)

#### Keywords

#### Faculty / Organisational entity

The aim of the thesis is the numerical investigation of saturated, stationary, incompressible Newtonian flow in porous media when inertia is not negligible. We focus our attention to the Navier-Stokes system with two pressures derived by two-scale homogenization. The thesis is subdivided into five Chapters. After the introductory remarks on porous media, filtration laws and upscaling methods, the first chapter is closed by stating the basic terminology and mathematical fundamentals. In Chapter 2, we start by formulating the Navier-Stokes equations on a periodic porous medium. By two-scale expansions of the velocity and pressure, we formally derive the Navier-Stokes system with two pressures. For the sake of completeness, known existence and uniqueness results are repeated and a convergence proof is given. Finally, we consider Stokes and Navier-Stokes systems with two pressures with respect to their relation to Darcy's law. Chapter 3 and Chapter 4 are devoted to the numerical solution of the nonlinear two pressure system. Therefore, we follow two approaches. The first approach which is developed in Chapter 3 is based on a splitting of the Navier-Stokes system with two pressures into micro and macro problems. The splitting is achieved by Taylor expanding the permeability function or by discretely computing the permeability function. The problems to be solved are a series of Stokes and Navier-Stokes problems on the periodicity cell. The Stokes problems are solved by an Uzawa conjugate gradient method. The Navier-Stokes equations are linearized by a least-squares conjugate gradient method, which leads to the solution of a sequence of Stokes problems. The macro problem consists of solving a nonlinear uniformly elliptic equation of second order. The least-squares linearization is applied to the macro problem leading to a sequence of Poisson problems. All equations will be discretized by finite elements. Numerical results are presented at the end of Chapter 3. The second approach presented in Chapter 4 relies on the variational formulation in a certain Hilbert space setting of the Navier-Stokes system with two pressures. The nonlinear problem is again linearized by the least-squares conjugate gradient method. We obtain a sequence of Stokes systems with two pressures. For the latter systems, we propose a fast solution method which relies on pre-computing Stokes systems on the periodicity cell for finite element basis functions acting as right hand sides. Finally, numerical results are discussed. In Chapter 5 we are concerned with modeling and simulation of the pressing section of a paper machine. We state a two-dimensional model of a press nip which takes into account elasticity and flow phenomena. Nonlinear filtration laws are incorporated into the flow model. We present a numerical solution algorithm and the chapter is closed by a numerical investigation of the model with special focus on inertia effects.

It is considered an analytical model of defaultable bond portfolio in terms of its face value process. The face value process dynamically evolves with time and incorporates changes caused by recovery payment on default followed by purchasing of new bonds. The further studies involve properties, distribution and control of the face value process.

Metallocenes containing diarylethene type photochromic switches are synthesized, characterized and tested in polyolefin catalysts. Propylene polymerizations using unbridged bis(2,3-dibenzo[b]thiophen-3-yl)cyclopenta[b]thien-3-yl)zirconium dichloride/MAO (80) treated with 254nm UV irradiation produced bimodal polymer distributions by GPC. This was due to an increase in the low molecular weight fractions when the closed form of the catalyst/photoswitch was made. Comparison with similarly structured catalyst without photoisomerization properties did not produce bimodal polymer under identical conditions. Propylene polymerizations made with dimethylsilyl[(1,5-dimethyl-3-phenylcyclopenta[b]thien-6-yl)][(2,3-dibenzothien-3-yl)cyclopenta[b]thien-6-yl)]zirconium dichloride/MAO (86) with 254nm UV irradiation caused a 3 fold increase in the polymer molecular weight. Polymers made with ethylene and ethylene/hexene using (80) after UV irradiation did not show differences in measured polymer properties. Polymerizations with ethylene/ hexene mixtures using (86) had increased activity and co-monomer (hexene) incorporation with UV irradiation.

This thesis deals with the development of thermoplastic polyolefin elastomers using recycled polyolefins and ground tyre rubber (GTR). The disposal of worn tyres and their economic recycling mean a great challenge nowadays. Material recycling is a preferred way in Europa owing to legislative actions and ecological arguments. This first step with worn tyres is already done in this direc-tion as GTR is available in different fractions in guaranteed quality. As the traditional applications of GTR are saturated, there is a great demand for new, value-added products containing GTR. So, the objective of this work was to convert GTR by reac-tive blending with polyolefins into thermoplastic elastomers (TPE) of suitable me-chanical and rheological properties. It has been established that bituminous reclamation of GTR prior to extrusion melt compounding with polyolefins is a promising way of TPE production. By this way the sol-content (acetone soluble fraction) of the GTR increases and the GTR particles can be better incorporated in the corresponding polyolefin matrix. The adhesion be-tween GTR and matrix is given by molecular intermingling in the resulting interphase. GTR particles of various production and mean particle size were involved in this study. As polyolefins recycled low-density polyethylene (LDPE), recycled high-density polyethylene (HDPE) and polypropylene (PP) were selected. First, the opti-mum conditions for the GTR reclamation in bitumen were established (160 °C < T < 180 °C; time ca. 4 hours). Polyolefin based TPEs were produced after GTR reclamation in extrusion compounding. Their mechanical (tensile behaviour, set properties), thermal (dynamic-mechanical thermal analysis, differential scanning calorimetry) and rheological properties (both in low- and high-shear rates ) were determined. The PE-based blends contained an ethylene/propylene/diene (EPDM) rubber as compatibilizer and their composition was as follows: PE/EPDM/GTR:bitumen = 50/25/25:25. The selected TPEs met the most important criterion, i.e. elongation at break > 100 %; compression set < 50%. The LDPE-based TPE (TPE(LDPE)) showed better me-chanical performance compared to the TPE(HDPE). This was assigned to the higher crystallinity of the HDPE. The PP-based blends of the compositions PP/(GTR-bitumen) 50/50 and 25/75, whereby the ratio of GTR/bitumen was 60/40, outperformed those containing non-reclaimed GTR. The related blends showed also a better compatibility with a PP-based commercial thermoplastic dynamic vulcanizate (TDV). Surprisingly, the mean particle size of the GTR, varied between < 0.2 and 0.4-0.7 mm, had a small effect on the mechanical properties, however somewhat larger for the rheological behaviour of the TPEs produced.

An autoregressive-ARCH model with possible exogeneous variables is treated. We estimate the conditional volatility of the model by applying feedforward networks to the residuals and prove consistency and asymptotic normality for the estimates under the rate of feedforward networks complexity. Recurrent neural networks estimates of GARCH and value-at-risk is studied. We prove consistency and asymptotic normality for the recurrent neural networks ARMA estimator under the rate of recurrent networks complexity. We also overcome the estimation problem in stochastic variance models in discrete time by feedforward networks and the introduction of a new distributions on the innovations. We use the method to calculate market risk such as expected shortfall and Value-at risk. We tested this distribution together with other new distributions on the GARCH family models against other common distributions on the financial market such as Normal Inverse Gaussian, normal and the Student's t- distributions. As an application of the models, some German stocks are studied and the different approaches are compared together with the most common method of GARCH(1,1) fit.

In modern textile manufacturing industries, the function of human eyes to detect disturbances in the production processes which yield defective products is switched to cameras. The camera images are analyzed with various methods to detect these disturbances automatically. There are, however, still problems with in particular semi-regular textures which are typical for weaving patterns. We study three parts of that problem of automatic texture analysis: image smoothing, texture synthesis and defect detection. In image smoothing, we develop a two dimensional kernel smoothing method with locally and directionally adaptive bandwidths allowing correlation in the errors. Two approaches are used in synthesising texture. The first is based on constructing a generalized Ising energy function in the Markov Random Field setup, and for the second, we use two-dimensional periodic bootstrap methods for semi-regular texture synthesis. We treat defect detection as multihypothesis testing problem with the null hypothesis representing the absence of defects and the other hypotheses representing various types of defects. We develop a test based on a nonparametric regression setup, and we use the bootstrap for approximating the distribution of our test statistic.

This thesis investigates the constrained form of the spherical Minimax location problem and the spherical Weber location problem. Specifically, we consider the problem of locating a new facility on the surface of the unit sphere in the presence of convex spherical polygonal restricted regions and forbidden regions such that the maximum weighted distance from the new facility on the surface of the unit sphere to m existing facilities is minimized and the sum of the weighted distance from the new facility on the surface of the unit sphere to m existing facilities is minimized. It is assumed that a forbidden region is an area on the surface of the unit sphere where travel and facility location are not permitted and that distance is measured using the great circle arc distance. We represent a polynomial time algorithm for the spherical Minimax location problem for the special case where all the existing facilities are located on the surface of a hemisphere. Further, we have developed algorithms for spherical Weber location problem using barrier distance on a hemisphere as well as on the unit sphere.

Sterisch anspruchsvolle Cyclopentadienyl-Liganden wurden zur Stabilisierung neuer Mono(cyclopentadienyl) Verbindungen der schweren Erdalkalimetalle eingesetzt und deren Funktionalisierbarkeit dieser Spezies wurde exemplarisch durch die Synthese neutraler Tripeldecker-Sandwichkomplexe demonstriert. Die dabei ausgebildeten Molekülstrukturen lassen sich mittels DFT-Rechnungen zuverlässig vorhersagen. In diesem Zusammenhang wurde ebenfalls der Cyclononatetraenyl-Ligand, dessen Komplexeigenschaften bisher nur unzureichend untersucht wurden, eingesetzt. Im Rahmen dieser Arbeit gelang die Synthese des Bis(cyclononatetraenyl)bariums, Ba(C9H9)2, und dessen spektroskopische Charakterisierung. DFT-Rechnungen sagen für diesen Komplex eine Metallocenstruktur mit nahezu parallelen Ringen und einem Ba-Ring Abstand von 2.37 Å voraus. Durch den Einsatz des Tetraisopropylcyclopentadienyl (4Cp) und Tri(tert.-butyl)cyclopentadienyl (Cp’)-Liganden gelang die Synthese von Bis- und Monocyclopentadienyl-Verbindungen der frühen und späten Lanthanoide. Besonders interessant in diesem Zusammenhang ist die erfolgreiche Darstellung des Azido-Clusters, [Na(dme)3]2[4Cp6Yb6(N3)14] (4Cp= (Me2CH)4C5H), der die unterschiedlichen Koordinationsmöglichkeiten des Azido-Liganden in einem einzigen Komplex vereint. Vergleichbare Komplexe waren in der Organolanthanoidchemie bisher unbekannt. Durch Substitution am Cyclopentadienyl-System lassen sich dessen elektronische und sterische Eigenschaften signifikant verändern. Die Auswirkungen dieser Effekte können sehr eindrucksvoll an Manganocen-Komplexen demonstriert werden, in denen sich der low- und high-spin Zustand energetisch nur sehr wenig unterscheiden. Der elektronische Grundzustand einer Reihe unterschiedlich substituierter Manganocen-Komplexe wurde mittels Festkörpermagnetismus, ESR, Röntgenstrukturanalyse, EXAFS und variabler Temperatur UV-Vis Spektroskopie bestimmt, und mit dem Substitutionsmuster am Cyclopentadienyl-System korreliert. Spin-Gleichgewichte ließen sich für [(Me3C)C5H4]2Mn, [(Me3C)2C5H3]2Mn und [(Me3C)(Me3Si)C5H3]2Mn nachweisen. Theoretische Rechnungen postulieren, dass Cerocen, Ce(C8H8)2, ein Beispiel für Moleküle mit gemischt-konfiguriertem Grundzustand sei, der durch 80 % [(Ce)f1e2u(cot)e2u3] und 20 % [(Ce)f0e2u(cot)e2u4] beschreiben werden könne. Obwohl dieses Molekül bereits seit 1976 bekannt ist, ist dessen elektronische Struktur bis heute sehr umstritten. Im Rahmen dieser Arbeit wurden neue Synthesekonzepte für diese Verbindung entwickelt und die elektronische Struktur mittels magnetischer Messungen im Festkörper, EXAFS und XANES Studien untersucht. Die dabei erhaltenen Daten sind in sehr guter Übereinstimmung mit den theoretischen Rechnungen und belegen die Bedeutung eines gemischt-konfigurierten Grundzustandes bei der Bindung in Organometallkomplexen der f-Block Metalle. Während in Cerocen nur ein temperaturunabhängiger Paramagnetismus (TIP) beobachtet werden kann, findet man eine starke Temperaturabhängigkeit der magnetischen Suszeptibilität in Ytterbium Systemen des Typs Cp’2Yb(bipy’) [Cp´ und bipy´ sind substituierte Cyclopentadienyl- oder 4,4’-substituierter 2,2’-Bipyridyl-Liganden]. Temperaturabhängige XANES-Experimenten belegen, dass auch in diesen Systemen ein gemischt-konfigurierter Grundzustand vorliegt, der durch [(Yb)f14(bipy)b1()0] und [(Yb)f13(bipy)b1()1] beschreiben werden kann. Der relative Anteil beider Wellenfunktionen zum Grundzustand wird durch Substitution am 2,2’-Bipyridyl- oder Cyclopentadienyl-System signifikant beeinflusst. Modelle, mit denen sich dieses Verhalten qualitativ beschreiben lässt, wurden im Rahmen dieser Arbeit entwickelt. Ein kinetisch stabilisiertes, adduktfreies Titanocen wurde unter Verwendung des Di(tert.-butyl)cyclopentadienyl Liganden hergestellt und dessen Reaktivität gegenüber kleinen Molekülen, z.B. CO, N2 und H2 untersucht. Im Rahmen der Reaktivitätsstudien wurden ebenfalls 2,2’-Bipyridyl Addukte an das Cp’2Ti Fragment synthetisiert und deren magnetische Eigenschaften erforscht. Durch Variationen am 2,2’-Bipyridyl System lässt sich das Singlet-Triplet Splitting in diesem System gezielt steuern.

The scientific and industrial interest devoted to polymer/layered silicate
nanocomposites due to their outstanding properties and novel applications resulted
in numerous studies in the last decade. They cover mostly thermoplastic- and
thermoset-based systems. Recently, studies in rubber/layered silicate
nanocomposites were started, as well. It was presented how complex maybe the
nanocomposite formation for the related systems. Therefore the rules governing their
structure-property relationships have to be clarified. In this Thesis, the related
aspects were addressed.
For the investigations several ethylene propylene diene rubbers (EPDM) of polar and
non-polar origin were selected, as well as, the more polar hydrogenated acrylonitrile
butadiene rubber (HNBR). The polarity was found to be beneficial on the
nanocomposite formation as it assisted to the intercalation of the polymer chains
within the clay galleries. This favored the development of exfoliated structures.
Finding an appropriate processing procedure, i.e. compounding in a kneader instead
of on an open mill, the mechanical performance of the nanocomposites was
significantly improved. The complexity of the nanocomposite formation in
rubber/organoclay system was demonstrated. The deintercalation of the organoclay
observed, was traced to the vulcanization system used. It was evidenced by an
indirect way that during sulfur curing, the primary amine clay intercalant leaves the
silicate surface and migrates in the rubber matrix. This was explained by its
participation in the sulfur-rich Zn-complexes created. Thus, by using quaternary
amine clay intercalants (as it was presented for EPDM or HNBR compounds) the
deintercalation was eliminated. The organoclay intercalation/deintercalation detected
for the primary amine clay intercalants, were controlled by means of peroxide curing
(as it was presented for HNBR compounds), where the vulcanization mechanism
differs from that of the sulfur curing.
The current analysis showed that by selecting the appropriate organoclay type the
properties of the nanocomposites can be tailored. This occurs via generating different
nanostructures (i.e. exfoliated, intercalated or deintercalated). In all cases, the
rubber/organoclay nanocomposites exhibited better performance than vulcanizates
with traditional fillers, like silica or unmodified (pristine) layered silicates.The mechanical and gas permeation behavior of the respective nanocomposites
were modelled. It was shown that models (e.g. Guth’s or Nielsen’s equations)
developed for “traditional” vulcanizates can be used when specific aspects are taken
into consideration. These involve characteristics related to the platy structure of the
silicates, i.e. their aspect ratio after compounding (appearance of platelet stacks), or
their orientation in the rubber matrix (order parameter).

Channel estimation is of great importance in many wireless communication systems, since it influences the overall performance of a system significantly. Especially in multi-user and/or multi-antenna systems, i.e. generally in multi-branch systems, the requirements on channel estimation are very high, since the training signals or so called pilots that are used for channel estimation suffer from multiple access interference. Recently, in the context with such systems more and more attention is paid to concepts for joint channel estimation (JCE) which have the capability to eliminate the multiple access interference and also the interference between the channel coefficients. The performance of JCE can be evaluated in noise limited systems by the SNR degradation and in interference limited systems by the variation coefficient. Theoretical analysis carried out in this thesis verifies that both performance criteria are closely related to the patterns of the pilots used for JCE, no matter the signals are represented in the time domain or in the frequency domain. Optimum pilots like disjoint pilots, Walsh code based pilots or CAZAC code based pilots, whose constructions are described in this thesis, do not show any SNR degradation when being applied to multi-branch systems. It is shown that optimum pilots constructed in the time domain become optimum pilots in the frequency domain after a discrete Fourier transformation. Correspondingly, optimum pilots in the frequency domain become optimum pilots in the time domain after an inverse discrete Fourier transformation. However, even for optimum pilots different variation coefficients are obtained in interference limited systems. Furthermore, especially for OFDM-based transmission schemes the peak-to-average power ratio (PAPR) of the transmit signal is an important decision criteria for choosing the most suitable pilots. CAZAC code based pilots are the only pilots among the regarded pilot constructions that result in a PAPR of 0 dB for the transmit signal that origins in the transmitted pilots. When summarizing the analysis regarding the SNR degradation, the variation coefficient and the PAPR with respect to one single service area and considering the impact due to interference from other adjacent service areas that occur due to a certain choice of the pilots, one can conclude that CAZAC codes are the most suitable pilots for the application in JCE of multi-carrier multi-branch systems, especially in the case if CAZAC codes that origin in different mother codes are assigned to different adjacent service areas. The theoretical results of the thesis are verified by simulation results. The choice of the parameters for the frequency domain or time domain JCE is oriented towards the evaluated implementation complexity. According to the chosen parameterization of the regarded OFDM-based and FMT-based systems it is shown that a frequency domain JCE is the best choice for OFDM and a time domain JCE is the best choice for FMT applying CAZAC codes as pilots. The results of this thesis can be used as a basis for further theoretical research and also for future JCE implementation in wireless systems.

In conventional radio communication systems, the system design generally starts from the transmitter (Tx), i.e. the signal processing algorithm in the transmitter is a priori selected, and then the signal processing algorithm in the receiver is a posteriori determined to obtain the corresponding data estimate. Therefore, in these conventional communication systems, the transmitter can be considered the master and the receiver can be considered the slave. Consequently, such systems can be termed transmitter (Tx) oriented. In the case of Tx orientation, the a priori selected transmitter algorithm can be chosen with a view to arrive at particularly simple transmitter implementations. This advantage has to be countervailed by a higher implementation complexity of the a posteriori determined receiver algorithm. Opposed to the conventional scheme of Tx orientation, the design of communication systems can alternatively start from the receiver (Rx). Then, the signal processing algorithm in the receiver is a priori determined, and the transmitter algorithm results a posteriori. Such an unconventional approach to system design can be termed receiver (Rx) oriented. In the case of Rx orientation, the receiver algorithm can be a priori selected in such a way that the receiver complexity is minimum, and the a posteriori determined transmitter has to tolerate more implementation complexity. In practical communication systems the implementation complexity corresponds to the weight, volume, cost etc of the equipment. Therefore, the complexity is an important aspect which should be taken into account, when building practical communication systems. In mobile radio communication systems, the complexity of the mobile terminals (MTs) should be as low as possible, whereas more complicated implementations can be tolerated in the base station (BS). Having in mind the above mentioned complexity features of the rationales Tx orientation and Rx orientation, this means that in the uplink (UL), i.e. in the radio link from the MT to the BS, the quasi natural choice would be Tx orientation, which leads to low cost transmitters at the MTs, whereas in the downlink (DL), i.e. in the radio link from the BS to the MTs, the rationale Rx orientation would be the favorite alternative, because this results in simple receivers at the MTs. Mobile radio downlinks with the rationale Rx orientation are considered in the thesis. Modern mobile radio communication systems are cellular systems, in which both the intracell and intercell interferences exist. These interferences are the limiting factors for the performance of mobile radio systems. The intracell interference can be eliminated or at least reduced by joint signal processing with consideration of all the signals in the considered cell. However such joint signal processing is not feasible for the elimination of intercell interference in practical systems. Knowing that the detrimental effect of intercell interference grows with its average energy, the transmit energy radiated from the transmitter should be as low as possible to keep the intercell interference low. Low transmit energy is required also with respect to the growing electro-phobia of the public. The transmit energy reduction for multi-user mobile radio downlinks by the rationale Rx orientation is dealt with in the thesis. Among the questions still open in this research area, two questions of major importance are considered here. MIMO is an important feature with respect to the transmit power reduction of mobile radio systems. Therefore, first questionconcerns the linear Rx oriented transmission schemes combined with MIMO antenna structures. The investigations of the MIMO benefit on the linear Rx oriented transmission schemes are studied in the thesis. Utilization of unconventional multiply connected quantization schemes at the receiver has also great potential to reduce the transmit energy. Therefore, the second question considers the designing of non-linear Rx oriented transmission schemes combined with multiply connected quantization schemes.