### Refine

#### Year of publication

- 2005 (31) (remove)

#### Document Type

- Doctoral Thesis (31) (remove)

#### Language

- English (31) (remove)

#### Keywords

#### Faculty / Organisational entity

An autoregressive-ARCH model with possible exogeneous variables is treated. We estimate the conditional volatility of the model by applying feedforward networks to the residuals and prove consistency and asymptotic normality for the estimates under the rate of feedforward networks complexity. Recurrent neural networks estimates of GARCH and value-at-risk is studied. We prove consistency and asymptotic normality for the recurrent neural networks ARMA estimator under the rate of recurrent networks complexity. We also overcome the estimation problem in stochastic variance models in discrete time by feedforward networks and the introduction of a new distributions on the innovations. We use the method to calculate market risk such as expected shortfall and Value-at risk. We tested this distribution together with other new distributions on the GARCH family models against other common distributions on the financial market such as Normal Inverse Gaussian, normal and the Student's t- distributions. As an application of the models, some German stocks are studied and the different approaches are compared together with the most common method of GARCH(1,1) fit.

Within the last decades, a remarkable development in materials science took place -- nowadays, materials are not only constructed for the use of inert structures but rather designed for certain predefined functions. This innovation was accompanied with the appearance of smart materials with reliable recognition, discrimination and capability of action as well as reaction. Even though ferroelectric materials serve smartly in real applications, they also possess several restrictions at high performance usage. The behavior of these materials is almost linear under the action of low electric fields or low mechanical stresses, but exhibits strong non-linear response under high electric fields or mechanical stresses. High electromechanical loading conditions result in a change of the spontaneous polarization direction with respect to individual domains, which is commonly referred to as domain switching. The aim of the present work is to develop a three-dimensional coupled finite element model, to study the rate-independent and rate-dependent behavior of piezoelectric materials including domain switching based on a micromechanical approach. The proposed model is first elaborated within a two-dimensional finite element setting for piezoelectric materials. Subsequently, the developed two-dimensional model is extended to the three-dimensional case. This work starts with developing a micromechanical model for ferroelectric materials. Ferroelectric materials exhibit ferroelectric domain switching, which refers to the reorientation of domains and occurs under purely electrical loading. For the simulation, a bulk piezoceramic material is considered and each grain is represented by one finite element. In reality, the grains in the bulk ceramics material are randomly oriented. This property is taken into account by applying random orientation as well as uniform distribution for individual elements. Poly-crystalline ferroelectric materials at un-poled virgin state can consequently be characterized by randomly oriented polarization vectors. Energy reduction of individual domains is adopted as a criterion for the initiation of domain switching processes. The macroscopic response of the bulk material is predicted by classical volume-averaging techniques. In general, domain switching does not only depend on external loads but also on neighboring grains, which is commonly denoted as the grain boundary effect. These effects are incorporated into the developed framework via a phenomenologically motivated probabilistic approach by relating the actual energy level to a critical energy level. Subsequently, the order of the chosen polynomial function is optimized so that simulations nicely match measured data. A rate-dependent polarization framework is proposed, which is applied to cyclic electrical loading at various frequencies. The reduction in free energy of a grain is used as a criterion for the onset of the domain switching processes. Nucleation in new grains and propagation of the domain walls during domain switching is modeled by a linear kinetics theory. The simulated results show that for increasing loading frequency the macroscopic coercive field is also increasing and the remanent polarization increases at lower loading amplitudes. The second part of this work is focused on ferroelastic domain switching, which refers to the reorientation of domains under purely mechanical loading. Under sufficiently high mechanical loading, however, the strain directions within single domains reorient with respect to the applied loading direction. The reduction in free energy of a grain is used as a criterion for the domain switching process. The macroscopic response of the bulk material is computed for the hysteresis curve (stress vs strain) whereby uni-axial and quasi-static loading conditions are applied on the bulk material specimen. Grain boundary effects are addressed by incorporating the developed probabilistic approach into this framework and the order of the polynomial function is optimized so that simulations match measured data. Rate dependent domain switching effects are captured for various frequencies and mechanical loading amplitudes by means of the developed volume fraction concept which relates the particular time interval to the switching portion. The final part of this work deals with ferroelectric and ferroelastic domain switching and refers to the reorientation of domains under coupled electromechanical loading. If this free energy for combined electromechanical loading exceeds the critical energy barrier elements are allowed to switch. Firstly, hysteresis and butterfly curves under purely electrical loading are discussed. Secondly, additional mechanical loads in axial and lateral directions are applied to the specimen. The simulated results show that an increasing compressive stress results in enlarged domain switching ranges and that the hysteresis and butterfly curves flatten at higher mechanical loading levels.

In this thesis we have discussed the problem of decomposing an integer matrix \(A\) into a weighted sum \(A=\sum_{k \in {\mathcal K}} \alpha_k Y^k\) of 0-1 matrices with the strict consecutive ones property. We have developed algorithms to find decompositions which minimize the decomposition time \(\sum_{k \in {\mathcal K}} \alpha_k\) and the decomposition cardinality \(|\{ k \in {\mathcal K}: \alpha_k > 0\}|\). In the absence of additional constraints on the 0-1 matrices \(Y^k\) we have given an algorithm that finds the minimal decomposition time in \({\mathcal O}(NM)\) time. For the case that the matrices \(Y^k\) are restricted to shape matrices -- a restriction which is important in the application of our results in radiotherapy -- we have given an \({\mathcal O}(NM^2)\) algorithm. This is achieved by solving an integer programming formulation of the problem by a very efficient combinatorial algorithm. In addition, we have shown that the problem of minimizing decomposition cardinality is strongly NP-hard, even for matrices with one row (and thus for the unconstrained as well as the shape matrix decomposition). Our greedy heuristics are based on the results for the decomposition time problem and produce better results than previously published algorithms.

In the first part of this work, called Simple node singularity, are computed matrix factorizations of all isomorphism classes, up to shiftings, of rank one and two, graded, indecomposable maximal Cohen--Macaulay (shortly MCM) modules over the affine cone of the simple node singularity. The subsection 2.2 contains a description of all rank two graded MCM R-modules with stable sheafification on the projective cone of R, by their matrix factorizations. It is given also a general description of such modules, of any rank, over a projective curve of arithmetic genus 1, using their matrix factorizations. The non-locally free rank two MCM modules are computed using an alghorithm presented in the Introduction of this work, that gives a matrix factorization of any extension of two MCM modules over a hypersurface. In the second part, called Fermat surface, are classified all graded, rank two, MCM modules over the affine cone of the Fermat surface. For the classification of the orientable rank two graded MCM R-modules, is used a description of the orientable modules (over normal rings) with the help of codimension two Gorenstein ideals, realized by Herzog and Kühl. It is proven (in section 4), that they have skew symmetric matrix factorizations (over any normal hypersurface ring). For the classification of the non-orientable rank two MCM R-modules, we use a similar idea as in the case of the orientable ones, only that the ideal is not any more Gorenstein.

This thesis aims at an overall improvement of the diffusion coefficient predictions. For this reason the theoretical determination of diffusion, viscosity, and thermodynamics in liquid systems is discussed. Furthermore, the experimental determination of diffusion coefficients is also part of this work. All investigations presented are carried out for organic binary liquid mixtures. Diffusion coefficient data of 9 highly nonideal binary mixtures are reported over the whole concentration range at various temperatures, (25, 30, and 35) °C. All mixtures investigated in a Taylor dispersion apparatus consist of an alcohol (ethanol, 1-propanol, or 1-butanol) dissolved in hexane, cyclohexane, carbon tetrachloride, or toluene. The uncertainty of the reported data is estimated to be within 310-11 m2s-1. To compute the thermodynamic correction factor an excess Gibbs energy model is required. Therefore, the applicability of COSMOSPACE to binary VLE predictions is thoroughly investigated. For this purpose a new method is developed to determine the required molecular parameters such as segment types, areas, volumes, and interaction parameters. So-called sigma profiles form the basis of this approach which describe the screening charge densities appearing on a molecule’s surface. To improve the prediction results a constrained two-parameter fitting strategy is also developed. These approaches are crucial to guarantee the physical significance of the segment parameters. Finally, the prediction quality of this approach is compared to the findings of the Wilson model, UNIQUAC, and the a priori predictive method COSMO-RS for a broad range of thermodynamic situations. The results show that COSMOSPACE yields results of similar quality compared to the Wilson model, while both perform much better than UNIQUAC and COSMO-RS. Since viscosity influences also the diffusion process, a new mixture viscosity model has been developed on the basis of Eyring’s absolute reaction rate theory. The nonidealities of the mixture are accounted for with the thermodynamically consistent COSMOSPACE approach. The required model and component parameters are derived from sigma-profiles, which form the basis of the a priori predictive method COSMO-RS. To improve the model performance two segment parameters are determined from a least-squares analysis to experimental viscosity data, whereas a constraint optimisation procedure is applied. In this way the parameters retain their physical meaning. Finally, the viscosity calculations of this approach are compared to the findings of the Eyring-UNIQUAC model for a broad range of chemical mixtures. These results show that the new Eyring-COSMOSPACE approach is superior to the frequently employed Eyring-UNIQUAC method. Finally, on the basis of Eyring’s absolute reaction rate theory a new model for the Maxwell-Stefan diffusivity has been developed. This model, an extension of the Vignes equation, describes the concentration dependence of the diffusion coefficient in terms of the diffusivities at infinite dilution and an additional excess Gibbs energy contribution. This energy part allows the explicit consideration of thermodynamic nonidealities within the modelling of this transport property. If the same set of interaction parameters, which has been derived from VLE data, is applied for this part and for the thermodynamic correction, a theoretically sound modelling of VLE and diffusion can be achieved. The influence of viscosity and thermodynamics on the model accuracy is thoroughly investigated. For this purpose diffusivities of 85 binary mixtures consisting of alkanes, cycloalkanes, halogenated alkanes, aromatics, ketones, and alcohols are computed. The average relative deviation between experimental data and computed values is approximately 8 % depending on the choice of the gE-model. These results indicate that this model is superior to some widely used methods. In summary, it can be said that the new approach facilitates the prediction of diffusion coefficients. The final equation is mathematically simple, universally applicable, and the prediction quality is as good as other models recently developed without having to worry about additional parameters, like pure component physical property data, self diffusion coefficients, or mixture viscosities. In contrast to many other models, the influence of the mixture viscosity can be omitted. Though a viscosity model is not required in the prediction of diffusion coefficients with the new equation, the models presented in this work allow a consistent modelling approach of diffusion, viscosity, and thermodynamics in liquid systems.

The use of polymers subjected to various tribological situations has become state of
the art. Owing to the advantages of self-lubrication and superior cleanliness, more
and more polymer composites are now being used as sliding elements, which were
formerly composed of metallic materials only. The feature that makes polymer composites
so promising in industrial applications is the opportunity to tailor their properties
with special fillers. The main aim of this study was to strength the importance of
integrating various functional fillers in the design of wear-resistant polymer composites
and to understand the role of fillers in modifying the wear behaviour of the materials.
Special emphasis was focused on enhancement of the wear resistance of
thermosetting and thermoplastic matrix composites by nano-TiO2 particles (with a
diameter of 300nm).
In order to optimize the content of various fillers, the tribological performance of a
series of epoxy-based composites, filled with short carbon fibre (SCF), graphite,
PTFE and nano-TiO2 in different proportions and combinations, was investigated.
The patterns of frictional coefficient, wear resistance and contact temperature were
examined by a pin-on-disc apparatus in a dry sliding condition under different contact
pressures and sliding velocities. The experimental results indicated that the addition
of nano-TiO2 effectively reduced the frictional coefficient, and consequently the contact
temperature, of short-fibre reinforced epoxy composites. Based on scanning
electron microscopy (SEM) and atomic force microscopy (AFM) observations of the
worn surfaces, a positive rolling effect of the nanoparticles between the material pairs
was proposed, which led to remarkable reduction of the frictional coefficient. In particular,
this rolling effect protected the SCF from more severe wear mechanisms, especially
in high sliding pressure and speed situations. As a result, the load carrying capacity of materials was significantly improved. In addition, the different contributions
of two solid lubricants, PTFE powders and graphite flakes, on the tribological
performance of epoxy nanocomposites were compared. It seems that graphite contributes
to the improved wear resistance in general, whereas PTFE can easily form a
transfer film and reduce the wear rate, especially in the running-in period. A combination of SCF and solid lubricants (PTFE and graphite) together with TiO2 nanoparticles
can achieve a synergistic effect on the wear behaviour of materials.
The favourable effect of nanoparticles detected in epoxy composites was also found
in the investigations of thermoplastic, e.g. polyamide (PA) 6,6 matrix. It was found
that nanoparticles could reduce the friction coefficient and wear rate of the PA6,6
composite remarkably, when additionally incorporated with short carbon fibres and
graphite flakes. In particular, the addition of nanoparticles contributed to an obvious
enhancement of the tribological performances of the short-fibre reinforced, hightemperature
resistant polymers, e.g. polyetherimide (PEI), especially under extreme
sliding conditions.
A procedure was proposed in order to correlate the contact temperature and the
wear rate with the frictional dissipated energy. Based on this energy consideration, a
better interpretation of the different performance of distinct tribo-systems is possible.
The validity of the model was illustrated for various sliding tests under different conditions.
Although simple quantitative formulations could not be expected at present, the
study may lead to a fundamental understanding of the mechanisms controlling friction
and wear from a general system point of view. Moreover, using the energybased
models, the artificial neural network (ANN) approach was applied to the experimental
data. The well-trained ANN has the potential to be further used for online
monitoring and prediction of wear progress in practical applications.
Die Verwendung von Polymeren im Hinblick auf verschiedene tribologische Anwendungen
entspricht mittlerweile dem Stand der Technik. Aufgrund der Vorteile von
Selbstschmierung und ausgezeichneter Sauberkeit werden polymere Verbundwerkstoffe
immer mehr als Gleitelemente genutzt, welche früher ausschließlich aus metallischen
Werkstoffen bestanden. Die Besonderheit, die polymere Verbundwerkstoffe
so vielversprechend für industrielle Anwendungen macht, ist die Möglichkeit ihre Eigenschaften
durch Zugabe von speziellen Füllstoffen maßzuschneidern. Das Hauptziel
dieser Arbeit bestand darin, die Wichtigkeit der Integration verschiedener funktionalisierter
Füllstoffe in den Aufbau polymerer Verbundwerkstoffe mit hohem Verschleißwiderstand
aufzuzeigen und die Rolle der Füllstoffe hinsichtlich des Verschleißverhaltens
zu verstehen. Hierbei lag besonderes Augenmerk auf der Verbesserung
des Verschleißwiderstandes bei Verbunden mit duromerer und thermoplastischer
Matrix durch die Präsenz von TiO2-Partikeln (Durchmesser 300nm).
Das tribologische Verhalten epoxidharzbasierter Verbunde, gefüllt mit kurzen Kohlenstofffasern
(SCF), Graphite, PTFE und nano-TiO2 in unterschiedlichen Proportionen
und Kombinationen wurde untersucht, um den jeweiligen Füllstoffgehalt zu optimieren.
Das Verhalten von Reibungskoeffizient, Verschleißwiderstand und Kontakttemperatur
wurde unter Verwendung einer Stift-Scheibe Apparatur bei trockenem
Gleitzustand, verschiedenen Kontaktdrücken und Gleitgeschwindigkeiten erforscht.
Die experimentellen Ergebnisse zeigen, dass die Zugabe von nano-TiO2 in kohlenstofffaserverstärkte
Epoxide den Reibungskoeffizienten und die Kontakttemperatur
herabsetzen können. Basierend auf Aufnahmen der verschlissenen Oberflächen
durch Rasterelektronen- (REM) und Rasterkraftmikroskopie (AFM) trat ein positiver
Rolleffekt der Nanopartikel zwischen den Materialpaaren zum Vorschein, welcher zu
einer beachtlichen Reduktion des Reibungskoeffizienten führte. Dieser Rolleffekt schützte insbesondere die SCF vor schwerwiegenderen Verschleißmechanismen,
speziell bei hohem Gleitdruck und hohen Geschwindigkeiten. Als Ergebnis konnte
die Tragfähigkeit dieser Materialien wesentlich verbessert werden. Zusätzlich wurde
die Wirkung zweier fester Schmierstoffe (PTFE-Pulver und Graphit-Flocken) auf die tribologische Leistungsfähigkeit verglichen. Es scheint, daß Graphit generell zur Verbesserung
des Verschleißwiderstandes beiträgt, wobei PTFE einen Transferfilm bilden
kann und die Verschleißrate insbesondere in der Einlaufphase reduziert. Die
Kombination von SCF und festen Schmierstoffen zusammen mit TiO2-Nanopartikeln
kann einen Synergieeffekt bei dem Verschleißverhalten der Materialien hervorrufen.
Der positive Effekt der Nanopartikel in Duromeren wurde ebenfalls bei den Untersuchungen
von Thermoplasten (PA 66) gefunden. Die Nanopartikel konnten den Reibungskoeffizienten
und die Verschleißrate der PA 66-Verbunde herabsetzen, wobei
zusätzlich Kohlenstofffasern und Graphit-Flocken enthalten waren. Die Zugabe von
Nanopartikeln trug offensichtlich auch zur Verbesserung der tribologischen Leistungsfähigkeit
von SCF-verstärkten, hochtemperaturbeständigen Polymeren (PEI)
insbesondere unter extremen Gleitzuständen, bei. Es wurde eine Methode vorgestellt,
um die Kontakttemperatur und die Verschleißrate mit der durch Reibung dissipierten
Energie zu korrelieren. Diese Energiebetrachtung ermöglicht eine bessere
Interpretation der verschiedenen Eigenschaften von ausgewählten Tribo-Systemen.
Die Gültigkeit dieses Models wurde für mehrere Gleittests unter verschiedenen Bedingungen
erklärt.
Vom generellen Blickpunkt eines tribologischen Systems aus mag diese Arbeit zu
einem fundamentalen Verständnis der Mechanismen führen, welche das Reibungs und Verschleißverhalten kontrollieren, obwohl hier einfache quantitative (mathematische)
Zusammenhänge bisher nicht zu erwarten sind. Der auf energiebasierenden
Modellen fußende Lösungsansatz der neuronalen Netzwerke (ANN) wurde darüber
hinaus auf die experimentellen Datensätze angewendet. Die gut trainierten ANN's
besitzen das Potenzial sie in der praktischen Anwendungen zur Online-
Datenauswertung und zur Vorhersage des Verschleißfortschritts einzusetzen.

This thesis investigates the constrained form of the spherical Minimax location problem and the spherical Weber location problem. Specifically, we consider the problem of locating a new facility on the surface of the unit sphere in the presence of convex spherical polygonal restricted regions and forbidden regions such that the maximum weighted distance from the new facility on the surface of the unit sphere to m existing facilities is minimized and the sum of the weighted distance from the new facility on the surface of the unit sphere to m existing facilities is minimized. It is assumed that a forbidden region is an area on the surface of the unit sphere where travel and facility location are not permitted and that distance is measured using the great circle arc distance. We represent a polynomial time algorithm for the spherical Minimax location problem for the special case where all the existing facilities are located on the surface of a hemisphere. Further, we have developed algorithms for spherical Weber location problem using barrier distance on a hemisphere as well as on the unit sphere.

In this dissertation a model of melt spinning (by Doufas, McHugh and Miller) has been investigated. The model (DMM model) which takes into account effects of inertia, air drag, gravity and surface tension in the momentum equation and heat exchange between air and fibre surface, viscous dissipation and crystallization in the energy equation also has a complicated coupling with the microstructure. The model has two parts, before onset of crystallization (BOC) and after onset of crystallization (AOC) with the point of onset of crystallization as the unknown interface. Mathematically the model has been formulated as a Free boundary value problem. Changes have been introduced in the model with respect to the air drag and an interface condition at the free boundary. The mathematical analysis of the nonlinear, coupled free boundary value problem shows that the solution of this problem depends heavily on initial conditions and parameters which renders the global analysis impossible. But by defining a physically acceptable solution, it is shown that for a more restricted set of initial conditions if a unique solution exists for IVP BOC then it is physically acceptable. For this the important property of the positivity of the conformation tensor variables has been proved. Further it is shown that if a physically acceptable solution exists for IVP BOC then under certain conditions it also exists for IVP AOC. This gives an important relation between the initial conditions of IVP BOC and the existence of a physically acceptable solution of IVP AOC. A new investigation has been done for the melt spinning process in the framework of classical mechanics. A Hamiltonian formulation has been done for the melt spinning process for which appropriate Poisson brackets have been derived for the 1-d, elongational flow of a viscoelastic fluid. From the Hamiltonian, cross sectionally averaged balance mass and momentum equations of melt spinning can be derived along with the microstructural equations. These studies show that the complicated problem of melt spinning can also be studied under the framework of classical mechanics. This work provides the basic groundwork on which further investigations on the dynamics of a fibre could be carried out. The Free boundary value problem has been solved numerically using shooting method. Matlab routines have been used to solve the IVPs arising in the problem. Some numerical case studies have been done to study the sensitivity of the ODE systems with respect to the initial guess and parameters. These experiments support the analysis done and throw more light on the stiff nature and ill posedness of the ODE systems. To validate the model, simulations have been performed on sets of data provided by the company. Comparison of numerical results (axial velocity profiles) has been done with the experimental profiles provided by the company. Numerical results have been found to be in excellent agreement with the experimental profiles.

The present thesis deals with a novel approach to increase the resource usage in digital communications. In digital communication systems, each information bearing data symbol is associated to a waveform which is transmitted over a physical medium. The time or frequency separations among the waveforms associated to the information data have always been chosen to avoid or limit the interference among them. By doing so, n the presence of a distortionless ideal channel, a single receive waveform is affected as little as possible by the presence of the other waveforms. The conditions necessary to meet the absence of any interference among the waveforms are well known and consist of a relationship between the minimum time separation among the waveforms and their bandwidth occupation or, equivalently, the minimum frequency separation and their time occupation. These conditions are referred to as Nyquist assumptions. The key idea of this work is to relax the Nyquist assumptions and to transmit with a time and/or frequency separation between the waveforms smaller than the minimum required to avoid interference. The reduction of the time and/or frequency separation generates not only an increment of the resource usage, but also a degradation in the quality of the received data. Therefore, to maintain a certain quality in the received signal, we have to increase the amount of transmitted power. We investigate the trade-off between the increment of the resource usage and the correspondent performance degradation in three different cases. The first case is the single carrier case in which all waveforms have the same spectrum, but have different temporal locations. The second one is the multi carrier case in which each waveform has its distinct spectrum and occupies all the available time. Finally, the hybrid case when each waveform has its unique time and frequency location. These different cases are framed within the general system modelling developed in the thesis so that they can be easily compared. We evaluate the potential of the key idea of the thesis by choosing a set of four possible waveforms with different characteristics. By doing so, we study the influence of the waveform characteristics in the three system configurations. We propose an interpretation of the results by modifying the well-known Shannon capacity formula and by explicitly expressing its dependency on the increment of resource usage and on the performance degradation. The results are very promising. We show that both in the case of a single carrier system with a time limited waveform and in the case of a multi-carrier system with a frequency limited waveform, the reduction of the time or frequency separation, respectively, has a positive effect on the channel capacity. The latter, depending on the actual SNR, can double or increase even more significantly.

The scientific and industrial interest devoted to polymer/layered silicate
nanocomposites due to their outstanding properties and novel applications resulted
in numerous studies in the last decade. They cover mostly thermoplastic- and
thermoset-based systems. Recently, studies in rubber/layered silicate
nanocomposites were started, as well. It was presented how complex maybe the
nanocomposite formation for the related systems. Therefore the rules governing their
structure-property relationships have to be clarified. In this Thesis, the related
aspects were addressed.
For the investigations several ethylene propylene diene rubbers (EPDM) of polar and
non-polar origin were selected, as well as, the more polar hydrogenated acrylonitrile
butadiene rubber (HNBR). The polarity was found to be beneficial on the
nanocomposite formation as it assisted to the intercalation of the polymer chains
within the clay galleries. This favored the development of exfoliated structures.
Finding an appropriate processing procedure, i.e. compounding in a kneader instead
of on an open mill, the mechanical performance of the nanocomposites was
significantly improved. The complexity of the nanocomposite formation in
rubber/organoclay system was demonstrated. The deintercalation of the organoclay
observed, was traced to the vulcanization system used. It was evidenced by an
indirect way that during sulfur curing, the primary amine clay intercalant leaves the
silicate surface and migrates in the rubber matrix. This was explained by its
participation in the sulfur-rich Zn-complexes created. Thus, by using quaternary
amine clay intercalants (as it was presented for EPDM or HNBR compounds) the
deintercalation was eliminated. The organoclay intercalation/deintercalation detected
for the primary amine clay intercalants, were controlled by means of peroxide curing
(as it was presented for HNBR compounds), where the vulcanization mechanism
differs from that of the sulfur curing.
The current analysis showed that by selecting the appropriate organoclay type the
properties of the nanocomposites can be tailored. This occurs via generating different
nanostructures (i.e. exfoliated, intercalated or deintercalated). In all cases, the
rubber/organoclay nanocomposites exhibited better performance than vulcanizates
with traditional fillers, like silica or unmodified (pristine) layered silicates.The mechanical and gas permeation behavior of the respective nanocomposites
were modelled. It was shown that models (e.g. Guth’s or Nielsen’s equations)
developed for “traditional” vulcanizates can be used when specific aspects are taken
into consideration. These involve characteristics related to the platy structure of the
silicates, i.e. their aspect ratio after compounding (appearance of platelet stacks), or
their orientation in the rubber matrix (order parameter).

In modern textile manufacturing industries, the function of human eyes to detect disturbances in the production processes which yield defective products is switched to cameras. The camera images are analyzed with various methods to detect these disturbances automatically. There are, however, still problems with in particular semi-regular textures which are typical for weaving patterns. We study three parts of that problem of automatic texture analysis: image smoothing, texture synthesis and defect detection. In image smoothing, we develop a two dimensional kernel smoothing method with locally and directionally adaptive bandwidths allowing correlation in the errors. Two approaches are used in synthesising texture. The first is based on constructing a generalized Ising energy function in the Markov Random Field setup, and for the second, we use two-dimensional periodic bootstrap methods for semi-regular texture synthesis. We treat defect detection as multihypothesis testing problem with the null hypothesis representing the absence of defects and the other hypotheses representing various types of defects. We develop a test based on a nonparametric regression setup, and we use the bootstrap for approximating the distribution of our test statistic.

This thesis contains the mathematical treatment of a special class of analog microelectronic circuits called translinear circuits. The goal is to provide foundations of a new coherent synthesis approach for this class of circuits. The mathematical methods of the suggested synthesis approach come from graph theory, combinatorics, and from algebraic geometry, in particular symbolic methods from computer algebra. Translinear circuits form a very special class of analog circuits, because they rely on nonlinear device models, but still allow a very structured approach to network analysis and synthesis. Thus, translinear circuits play the role of a bridge between the "unknown space" of nonlinear circuit theory and the very well exploited domain of linear circuit theory. The nonlinear equations describing the behavior of translinear circuits possess a strong algebraic structure that is nonetheless flexible enough for a wide range of nonlinear functionality. Furthermore, translinear circuits offer several technical advantages like high functional density, low supply voltage and insensitivity to temperature. This unique profile is the reason that several authors consider translinear networks as the key to systematic synthesis methods for nonlinear circuits. The thesis proposes the usage of a computer-generated catalog of translinear network topologies as a synthesis tool. The idea to compile such a catalog has grown from the observation that on the one hand, the topology of a translinear network must satisfy strong constraints which severely limit the number of "admissible" topologies, in particular for networks with few transistors, and on the other hand, the topology of a translinear network already fixes its essential behavior, at least for static networks, because the so-called translinear principle requires the continuous parameters of all transistors to be the same. Even though the admissible topologies are heavily restricted, it is a highly nontrivial task to compile such a catalog. Combinatorial techniques have been adapted to undertake this task. In a catalog of translinear network topologies, prototype network equations can be stored along with each topology. When a circuit with a specified behavior is to be designed, one can search the catalog for a network whose equations can be matched with the desired behavior. In this context, two algebraic problems arise: To set up a meaningful equation for a network in the catalog, an elimination of variables must be performed, and to test whether a prototype equation from the catalog and a specified equation of desired behavior can be "matched", a complex system of polynomial equations must be solved, where the solutions are restricted to a finite set of integers. Sophisticated algorithms from computer algebra are applied in both cases to perform the symbolic computations. All mentioned algorithms have been implemented using C++, Singular, and Mathematica, and are successfully applied to actual design problems of humidity sensor circuitry at Analog Microelectronics GmbH, Mainz. As result of the research conducted, an exhaustive catalog of all static formal translinear networks with at most eight transistors is available. The application for the humidity sensor system proves the applicability of the developed synthesis approach. The details and implementations of the algorithms are worked out only for static networks, but can easily be adopted for dynamic networks as well. While the implementation of the combinatorial algorithms is stand-alone software written "from scratch" in C++, the implementation of the algebraic algorithms, namely the symbolic treatment of the network equations and the match finding, heavily rely on the sophisticated Gröbner basis engine of Singular and thus on more than a decade of experience contained in a special-purpose computer algebra system. It should be pointed out that the thesis contains the new observation that the translinear loop equations of a translinear network are precisely represented by the toric ideal of the network's translinear digraph. Altogether, this thesis confirms and strengthenes the key role of translinear circuits as systematically designable nonlinear circuits.

Metallocenes containing diarylethene type photochromic switches are synthesized, characterized and tested in polyolefin catalysts. Propylene polymerizations using unbridged bis(2,3-dibenzo[b]thiophen-3-yl)cyclopenta[b]thien-3-yl)zirconium dichloride/MAO (80) treated with 254nm UV irradiation produced bimodal polymer distributions by GPC. This was due to an increase in the low molecular weight fractions when the closed form of the catalyst/photoswitch was made. Comparison with similarly structured catalyst without photoisomerization properties did not produce bimodal polymer under identical conditions. Propylene polymerizations made with dimethylsilyl[(1,5-dimethyl-3-phenylcyclopenta[b]thien-6-yl)][(2,3-dibenzothien-3-yl)cyclopenta[b]thien-6-yl)]zirconium dichloride/MAO (86) with 254nm UV irradiation caused a 3 fold increase in the polymer molecular weight. Polymers made with ethylene and ethylene/hexene using (80) after UV irradiation did not show differences in measured polymer properties. Polymerizations with ethylene/ hexene mixtures using (86) had increased activity and co-monomer (hexene) incorporation with UV irradiation.

Channel estimation is of great importance in many wireless communication systems, since it influences the overall performance of a system significantly. Especially in multi-user and/or multi-antenna systems, i.e. generally in multi-branch systems, the requirements on channel estimation are very high, since the training signals or so called pilots that are used for channel estimation suffer from multiple access interference. Recently, in the context with such systems more and more attention is paid to concepts for joint channel estimation (JCE) which have the capability to eliminate the multiple access interference and also the interference between the channel coefficients. The performance of JCE can be evaluated in noise limited systems by the SNR degradation and in interference limited systems by the variation coefficient. Theoretical analysis carried out in this thesis verifies that both performance criteria are closely related to the patterns of the pilots used for JCE, no matter the signals are represented in the time domain or in the frequency domain. Optimum pilots like disjoint pilots, Walsh code based pilots or CAZAC code based pilots, whose constructions are described in this thesis, do not show any SNR degradation when being applied to multi-branch systems. It is shown that optimum pilots constructed in the time domain become optimum pilots in the frequency domain after a discrete Fourier transformation. Correspondingly, optimum pilots in the frequency domain become optimum pilots in the time domain after an inverse discrete Fourier transformation. However, even for optimum pilots different variation coefficients are obtained in interference limited systems. Furthermore, especially for OFDM-based transmission schemes the peak-to-average power ratio (PAPR) of the transmit signal is an important decision criteria for choosing the most suitable pilots. CAZAC code based pilots are the only pilots among the regarded pilot constructions that result in a PAPR of 0 dB for the transmit signal that origins in the transmitted pilots. When summarizing the analysis regarding the SNR degradation, the variation coefficient and the PAPR with respect to one single service area and considering the impact due to interference from other adjacent service areas that occur due to a certain choice of the pilots, one can conclude that CAZAC codes are the most suitable pilots for the application in JCE of multi-carrier multi-branch systems, especially in the case if CAZAC codes that origin in different mother codes are assigned to different adjacent service areas. The theoretical results of the thesis are verified by simulation results. The choice of the parameters for the frequency domain or time domain JCE is oriented towards the evaluated implementation complexity. According to the chosen parameterization of the regarded OFDM-based and FMT-based systems it is shown that a frequency domain JCE is the best choice for OFDM and a time domain JCE is the best choice for FMT applying CAZAC codes as pilots. The results of this thesis can be used as a basis for further theoretical research and also for future JCE implementation in wireless systems.

We work in the setting of time series of financial returns. Our starting point are the GARCH models, which are very common in practice. We introduce the possibility of having crashes in such GARCH models. A crash will be modeled by drawing innovations from a distribution with much mass on extremely negative events, while in ''normal'' times the innovations will be drawn from a normal distribution. The probability of a crash is modeled to be time dependent, depending on the past of the observed time series and/or exogenous variables. The aim is a splitting of risk into ''normal'' risk coming mainly from the GARCH dynamic and extreme event risk coming from the modeled crashes. We will present several incarnations of this modeling idea and give some basic properties like the conditional first and second moments. For the special case that we just have an ARCH dynamic we can establish geometric ergodicity and, thus, stationarity and mixing conditions. Also in the ARCH case we formulate (quasi) maximum likelihood estimators and can derive conditions for consistency and asymptotic normality of the parameter estimates. In a special case of genuine GARCH dynamic we are able to establish L_1-approximability and hence laws of large numbers for the processes itself. We can formulate a conditional maximum likelihood estimator in this case, but cannot completely establish consistency for them. On the practical side we look for the outcome of estimating models with genuine GARCH dynamic and compare the result to classical GARCH models. We apply the models to Value at Risk estimation and see that in comparison to the classical models many of ours seem to work better although we chose the crash distributions quite heuristically.

It is considered an analytical model of defaultable bond portfolio in terms of its face value process. The face value process dynamically evolves with time and incorporates changes caused by recovery payment on default followed by purchasing of new bonds. The further studies involve properties, distribution and control of the face value process.

Non-commutative polynomial algebras appear in a wide range of applications, from quantum groups and theoretical physics to linear differential and difference equations. In the thesis, we have developed a framework, unifying many important algebras in the classes of \(G\)- and \(GR\)-algebras and studied their ring-theoretic properties. Let \(A\) be a \(G\)-algebra in \(n\) variables. We establish necessary and sufficient conditions for \(A\) to have a Poincar'e-Birkhoff-Witt (PBW) basis. Further on, we show that besides the existence of a PBW basis, \(A\) shares some other properties with the commutative polynomial ring \(\mathbb{K}[x_1,\ldots,x_n]\). In particular, \(A\) is a Noetherian integral domain of Gel'fand-Kirillov dimension \(n\). Both Krull and global homological dimension of \(A\) are bounded by \(n\); we provide examples of \(G\)-algebras where these inequalities are strict. Finally, we prove that \(A\) is Auslander-regular and a Cohen-Macaulay algebra. In order to perform symbolic computations with modules over \(GR\)-algebras, we generalize Gröbner bases theory, develop and respectively enhance new and existing algorithms. We unite the most fundamental algorithms in a suite of applications, called "Gröbner basics" in the literature. Furthermore, we discuss algorithms appearing in the non-commutative case only, among others two-sided Gröbner bases for bimodules, annihilators of left modules and operations with opposite algebras. An important role in Representation Theory is played by various subalgebras, like the center and the Gel'fand-Zetlin subalgebra. We discuss their properties and their relations to Gröbner bases, and briefly comment some aspects of their computation. We proceed with these subalgebras in the chapter devoted to the algorithmic study of morphisms between \(GR\)-algebras. We provide new results and algorithms for computing the preimage of a left ideal under a morphism of \(GR\)-algebras and show both merits and limitations of several methods that we propose. We use this technique for the computation of the kernel of a morphism, decomposition of a module into central characters and algebraic dependence of pairwise commuting elements. We give an algorithm for computing the set of one-dimensional representations of a \(G\)-algebra \(A\), and prove, moreover, that if the set of finite dimensional representations of \(A\) over a ground field \(K\) is not empty, then the homological dimension of \(A\) equals \(n\). All the algorithms are implemented in a kernel extension Plural of the computer algebra system Singular. We discuss the efficiency of computations and provide a comparison with other computer algebra systems. We propose a collection of benchmarks for testing the performance of algorithms; the comparison of timings shows that our implementation outperforms all of the modern systems with the combination of both broad functionality and fast implementation. In the thesis, there are many new non-trivial examples, and also the solutions to various problems, arising in different fields of mathematics. All of them were obtained with the developed theory and the implementation in Plural, most of them are treated computationally in this thesis for the first time.

This thesis deals with the development of thermoplastic polyolefin elastomers using recycled polyolefins and ground tyre rubber (GTR). The disposal of worn tyres and their economic recycling mean a great challenge nowadays. Material recycling is a preferred way in Europa owing to legislative actions and ecological arguments. This first step with worn tyres is already done in this direc-tion as GTR is available in different fractions in guaranteed quality. As the traditional applications of GTR are saturated, there is a great demand for new, value-added products containing GTR. So, the objective of this work was to convert GTR by reac-tive blending with polyolefins into thermoplastic elastomers (TPE) of suitable me-chanical and rheological properties. It has been established that bituminous reclamation of GTR prior to extrusion melt compounding with polyolefins is a promising way of TPE production. By this way the sol-content (acetone soluble fraction) of the GTR increases and the GTR particles can be better incorporated in the corresponding polyolefin matrix. The adhesion be-tween GTR and matrix is given by molecular intermingling in the resulting interphase. GTR particles of various production and mean particle size were involved in this study. As polyolefins recycled low-density polyethylene (LDPE), recycled high-density polyethylene (HDPE) and polypropylene (PP) were selected. First, the opti-mum conditions for the GTR reclamation in bitumen were established (160 °C < T < 180 °C; time ca. 4 hours). Polyolefin based TPEs were produced after GTR reclamation in extrusion compounding. Their mechanical (tensile behaviour, set properties), thermal (dynamic-mechanical thermal analysis, differential scanning calorimetry) and rheological properties (both in low- and high-shear rates ) were determined. The PE-based blends contained an ethylene/propylene/diene (EPDM) rubber as compatibilizer and their composition was as follows: PE/EPDM/GTR:bitumen = 50/25/25:25. The selected TPEs met the most important criterion, i.e. elongation at break > 100 %; compression set < 50%. The LDPE-based TPE (TPE(LDPE)) showed better me-chanical performance compared to the TPE(HDPE). This was assigned to the higher crystallinity of the HDPE. The PP-based blends of the compositions PP/(GTR-bitumen) 50/50 and 25/75, whereby the ratio of GTR/bitumen was 60/40, outperformed those containing non-reclaimed GTR. The related blends showed also a better compatibility with a PP-based commercial thermoplastic dynamic vulcanizate (TDV). Surprisingly, the mean particle size of the GTR, varied between < 0.2 and 0.4-0.7 mm, had a small effect on the mechanical properties, however somewhat larger for the rheological behaviour of the TPEs produced.

The thesis is focused on modelling and simulation of a Joint Transmission and Detection Integrated Network (JOINT), a novel air interface concept for B3G mobile radio systems. Besides the utilization of the OFDM transmission technique, which is a promising candidate for future mobile radio systems, and of the duplexing scheme time division duplexing (TDD), the subdivision of the geographical domain to be supported by mobile radio communications into service areas (SAs) is a highlighted concept of JOINT. A SA consists of neighboring sub-areas, which correspond to the cells of conventional cellular systems. The signals in a SA are jointly processed in a Central Unit (CU) in each SA. The CU performs joint channel estimation (JCE) and joint detection (JD) in the form of the receive-zero-forcing (RxZF) Filter for the uplink (UL) transmission and joint transmission (JT) in the form of the transmit-zero-forcing (TxZF) Filter for the downlink (DL) transmission. By these algorithms intra-SA multiple access interference (MAI) can be eliminated within the limits of the used model so that unbiased data estimates are obtained, and most of the computational effort is moved from mobile terminals (MTs) to the CU so that the MTs can do with low complexity. A simulation chain of JOINT has been established in the software MLDesigner by the author based on time discrete equivalent lowpass modelling. In this simulation chain, all key functionalities of JOINT are implemented. The simulation chain is designed for link level investigations. A number of channel models are implemented both for the single-SA scenario and the multiple-SA scenario so that the system performance of JOINT can be comprehensively studied. It is shown that in JOINT a duality or a symmetry of the MAI elimination in the UL and in the DL exists. Therefore, the typical noise enhancement going along with the MAI elimination by JD and JT, respectively, is the same in both links. In the simulations also the impact of channel estimation errors on the system performance is studied. In the multiple-SA scenario, due to the existence of the inter-SA MAI, which cannot be suppressed by the algorithms of JD and JT, the system performance in terms of the average bit error rate (BER) and the BER statistics degrades. A collection of simulation results show the potential of JOINT with respect to the improvement of the system performance and the enhancement of the spectrum e±ciency as compared to conventional cellular systems.

Automated theorem proving is a search problem and, by its undecidability, a very difficult one. The challenge in the development of a practically successful prover is the mapping of the extensively developed theory into a program that runs efficiently on a computer. Starting from a level-based system model for automated theorem provers, in this work we present different techniques that are important for the development of powerful equational theorem provers. The contributions can be divided into three areas: Architecture. We present a novel prover architecture that is based on a set-based compression scheme. With moderate additional computational costs we achieve a substantial reduction of the memory requirements. Further wins are architectural clarity, the easy provision of proof objects, and a new way to parallelize a prover which shows respectable speed-ups in practice. The compact representation paves the way to new applications of automated equational provers in the area of verification systems. Algorithms. To improve the speed of a prover we need efficient solutions for the most time-consuming sub-tasks. We demonstrate improvements of several orders of magnitude for two of the most widely used term orderings, LPO and KBO. Other important contributions are a novel generic unsatisfiability test for ordering constraints and, based on that, a sufficient ground reducibility criterion with an excellent cost-benefit ratio. Redundancy avoidance. The notion of redundancy is of central importance to justify simplifying inferences which are used to prune the search space. In our experience with unfailing completion, the usual notion of redundancy is not strong enough. In the presence of associativity and commutativity, the provers often get stuck enumerating equations that are permutations of each other. By extending and refining the proof ordering, many more equations can be shown redundant. Furthermore, our refinement of the unfailing completion approach allows us to use redundant equations for simplification without the need to consider them for generating inferences. We describe the efficient implementation of several redundancy criteria and experimentally investigate their influence on the proof search. The combination of these techniques results in a considerable improvement of the practical performance of a prover, which we demonstrate with extensive experiments for the automated theorem prover Waldmeister. The progress achieved allows the prover to solve problems that were previously out of reach. This considerably enhances the potential of the prover and opens up the way for new applications.