### Refine

#### Year of publication

- 2013 (12) (remove)

#### Document Type

- Doctoral Thesis (12) (remove)

#### Keywords

- Edwards Model (1)
- Feynman Integrals (1)
- Hamiltonian Path Integrals (1)
- Karhunen-Loève expansion (1)
- Mehrskalenmodell (1)
- RKHS (1)
- White Noise Analysis (1)
- alternating optimization (1)
- fiber reinforced silicon carbide (1)
- graph p-Laplacian (1)

#### Faculty / Organisational entity

- Fachbereich Mathematik (12) (remove)

The main purpose of the study was to improve the physical properties of the modelling of compressed materials, especially fibrous materials. Fibrous materials are finding increasing application in the industries. And most of the materials are compressed for different applications. For such situation, we are interested in how the fibre arranged, e.g. with which distribution. For given materials it is possible to obtain a three-dimensional image via micro computed tomography. Since some physical parameters, e.g. the fibre lengths or the directions for points in the fibre, can be checked under some other methods from image, it is beneficial to improve the physical properties by changing the parameters in the image.
In this thesis, we present a new maximum-likelihood approach for the estimation of parameters of a parametric distribution on the unit sphere, which is various as some well known distributions, e.g. the von-Mises Fisher distribution or the Watson distribution, and for some models better fit. The consistency and asymptotic normality of the maximum-likelihood estimator are proven. As the second main part of this thesis, a general model of mixtures of these distributions on a hypersphere is discussed. We derive numerical approximations of the parameters in an Expectation Maximization setting. Furthermore we introduce a non-parametric estimation of the EM algorithm for the mixture model. Finally, we present some applications to the statistical analysis of fibre composites.

This thesis deals with generalized inverses, multivariate polynomial interpolation and approximation of scattered data. Moreover, it covers the lifting scheme, which basically links the aforementioned topics. For instance, determining filters for the lifting scheme is connected to multivariate polynomial interpolation. More precisely, sets of interpolation sites are required that can be interpolated by a unique polynomial of a certain degree. In this thesis a new class of such sets is introduced and elements from this class are used to construct new and computationally more efficient filters for the lifting scheme.
Furthermore, a method to approximate multidimensional scattered data is introduced which is based on the lifting scheme. A major task in this method is to solve an ordinary linear least squares problem which possesses a special structure. Exploiting this structure yields better approximations and therefore this particular least squares problem is analyzed in detail. This leads to a characterization of special generalized inverses with partially prescribed image spaces.

This thesis is divided into two parts. Both cope with multi-class image segmentation and utilize
non-smooth optimization algorithms.
The topic of the first part, namely unsupervised segmentation, is the application of clustering
to image pixels. Therefore, we start with an introduction of the biconvex center-based clustering
algorithms c-means and fuzzy c-means, where c denotes the number of classes. We show that
fuzzy c-means can be seen as an approximation of c-means in terms of power means.
Since noise is omnipresent in our image data, these simple clustering models are not suitable
for its segmentation. To this end, we introduce a general and finite dimensional segmentation
model that consists of a data term stemming from the aforementioned clustering models plus a
continuous regularization term. We tackle this optimization model via an alternating minimiza-
tion approach called regularized c-centers (RcC). Thereby, we fix the centers and optimize the
segment membership of the pixels and vice versa. In this general setting, we prove convergence
in the sense of set-valued algorithms using Zangwill’s Theory [172].
Further, we present a segmentation model with a total variation regularizer. While updating
the cluster centers is straightforward for fixed segment memberships of the pixels, updating the
segment membership can be solved iteratively via non-smooth, convex optimization. Thereby,
we do not iterate a convex optimization algorithm until convergence. Instead, we stop as soon as
we have a certain amount of decrease in the objective functional to increase the efficiency. This
algorithm is a particular implementation of RcC providing also the corresponding convergence
theory. Moreover, we show the good performance of our method in various examples such as
simulated 2d images of brain tissue and 3d volumes of two materials, namely a multi-filament
composite superconductor and a carbon fiber reinforced silicon carbide ceramics. Thereby, we
exploit the property of the latter material that two components have no common boundary in
our adapted model.
The second part of the thesis is concerned with supervised segmentation. We leave the area
of center based models and investigate convex approaches related to graph p-Laplacians and
reproducing kernel Hilbert spaces (RKHSs). We study the effect of different weights used to
construct the graph. In practical experiments we show on the one hand image types that
are better segmented by the p-Laplacian model and on the other hand images that are better
segmented by the RKHS-based approach. This is due to the fact that the p-Laplacian approach
provides smoother results, while the RKHS approach provides often more accurate and detailed
segmentations. Finally, we propose a novel combination of both approaches to benefit from the
advantages of both models and study the performance on challenging medical image data.

This thesis is concerned with tropical moduli spaces, which are an important tool in tropical enumerative geometry. The main result is a construction of tropical moduli spaces of rational tropical covers of smooth tropical curves and of tropical lines in smooth tropical surfaces. The construction of a moduli space of tropical curves in a smooth tropical variety is reduced to the case of smooth fans. Furthermore, we point out relations to intersection theory on suitable moduli spaces on algebraic curves.

Factorization of multivariate polynomials is a cornerstone of many applications in computer algebra. To compute it, one uses an algorithm by Zassenhaus who used it in 1969 to factorize univariate polynomials over \(\mathbb{Z}\). Later Musser generalized it to the multivariate case. Subsequently, the algorithm was refined and improved.
In this work every step of the algorithm is described as well as the problems that arise in these steps.
In doing so, we restrict to the coefficient domains \(\mathbb{F}_{q}\), \(\mathbb{Z}\), and \(\mathbb{Q}(\alpha)\) while focussing on a fast implementation. The author has implemented almost all algorithms mentioned in this work in the C++ library factory which is part of the computer algebra system Singular.
Besides, a new bound on the coefficients of a factor of a multivariate polynomial over \(\mathbb{Q}(\alpha)\) is proven which does not require \(\alpha\) to be an algebraic integer. This bound is used to compute Hensel lifting and recombination of factors in a modular fashion. Furthermore, several sub-steps are improved.
Finally, an overview on the capability of the implementation is given which includes benchmark examples as well as random generated input which is supposed to give an impression of the average performance.

Many real life problems have multiple spatial scales. In addition to the multiscale nature one has to take uncertainty into account. In this work we consider multiscale problems with stochastic coefficients.
We combine multiscale methods, e.g., mixed multiscale finite elements or homogenization, which are used for deterministic problems with stochastic methods, such as multi-level Monte Carlo or polynomial chaos methods.
The work is divided into three parts.
In the first two parts we study homogenization with different stochastic methods. Therefore we consider elliptic stationary diffusion equations with stochastic coefficients.
The last part is devoted to the study of mixed multiscale finite elements in combination with multi-level Monte Carlo methods. In the third part we consider multi-phase flow and transport equations.

Constructing accurate earth models from seismic data is a challenging task. Traditional methods rely on ray based approximations of the wave equation and reach their limit in geologically complex areas. Full waveform inversion (FWI) on the other side seeks to minimize the misﬁt between modeled and observed data without such approximation.
While superior in accuracy, FWI uses a gradient based iterative scheme that makes it also very computationally expensive. In this thesis we analyse and test an Alternating Direction Implicit (ADI) scheme in order to reduce the costs of the two dimensional time domain algorithm for solving the acoustic wave equation. The ADI scheme can be seen as an intermediate between explicit and implicit ﬁnite diﬀerence modeling schemes. Compared to full implicit schemes the ADI scheme only requires the solution of much smaller matrices and is thus less computationally demanding. Using ADI we can handle coarser discretization compared to an explicit method. Although order of convergence and CFL conditions for the examined explicit method and ADI scheme are comparable, we observe that the ADI scheme is less prone to dispersion. Furhter, our algorithm is eﬃciently parallelized with vectorization and threading techniques. In a numerical comparison, we can demonstrate a runtime advantage of the ADI scheme over an explicit method of the same accuracy.
With the modeling in place, we test and compare several inverse schemes in the second part of the thesis. With the goal of avoiding local minima and improving speed of convergence, we use diﬀerent minimization functions and hierarchical approaches. In several tests, we demonstrate superior results of the L1 norm compared to the L2 norm – especially in the presence of noise. Furthermore we show positive eﬀects for applying three diﬀerent multiscale approaches to the inverse problem. These methods focus on low frequency, early recording, or far oﬀset during early iterations of the minimization and then proceed iteratively towards the full problem. We achieve best results with the frequency based multiscale scheme, for which we also provide a heuristical method of choosing iteratively increasing frequency bands.
Finally, we demonstrate the eﬀectiveness of the diﬀerent methods ﬁrst on the Marmousi model and then on an extract of the 2004 BP model, where we are able to recover both high contrast top salt structures and lower contrast inclusions accurately.

The use of trading stops is a common practice in financial markets for a variety of reasons: it provides a simple way to control losses on a given trade, while also ensuring that profit-taking is not deferred indefinitely; and it allows opportunities to consider reallocating resources to other investments. In this thesis, it is explained why the use of stops may be desirable in certain cases.
This is done by proposing a simple objective to be optimized. Some simple and commonly-used rules for the placing and use of stops are investigated; consisting of fixed or moving barriers, with fixed transaction costs. It is shown how to identify optimal levels at which to set stops, and the performances of different rules and strategies are compared. Thereby, uncertainty and altering of the drift parameter of the investment are incorporated.

In the last few years a lot of work has been done in the investigation of Brownian motion with point interaction(s) in one and higher dimensions. Roughly speaking a Brownian motion with point interaction is nothing else than a Brownian motion whose generator is disturbed by a measure supported in just one point.
The purpose of the present work is the introducing of curve interactions of the two dimensional Brownian motion for a closed curve \(\mathcal{C}\). We will understand a curve interaction as a self-adjoint extension of the restriction of the Laplacian to the set of infinitely often continuously differentiable functions with compact support in \(\mathbb{R}^{2}\) which are constantly 0 at the closed curve. We will give a full description of all these self-adjoint extensions.
In the second chapter we will prove a generalization of Tanaka's formula to \(\mathbb{R}^{2}\). We define \(g\) to be a so-called harmonic single layer with continuous layer function \(\eta\) in \(\mathbb{R}^{2}\). For such a function \(g\) we prove
\begin{align}
g\left(B_{t}\right)=g\left(B_{0}\right)+\int\limits_{0}^{t}{\nabla g\left(B_{s}\right)\mathrm{d}B_{s}}+\int\limits_{0}^{t}\eta\left(B_{s}\right)\mathrm{d}L\left(s,\mathcal{C}\right)
\end{align}
where \(B_{t}\) is just the usual Brownian motion in \(\mathbb{R}^{2}\) and \(L\left(t,\mathcal{C}\right)\) is the connected unique local time process of \(B_{t}\) on the closed curve \(\mathcal{C}\).
We will use the generalized Tanaka formula in the following chapter to construct classes of processes related to curve interactions. In a first step we get the generalization of point interactions in a second step we get processes which behaves like a Brownian motion in the complement of \(\mathcal{C}\) and has an additional movement along the curve in the time- scale of \(L\left(t,\mathcal{C}\right)\). Such processes do not exist in the one point case since there we cannot move when the Brownian motion is in the point.
By establishing an approximation of a curve interaction by operators of the form Laplacian \(+V_{n}\) with "nice" potentials \(V_{n}\) we are able to deduce the existence of superprocesses related to curve interactions.
The last step is to give an approximation of these superprocesses by a sytem of branching particles. This approximation gives a better understanding of the related mass creation.

The application behind the subject of this thesis are multiscale simulations on highly heterogeneous particle-reinforced composites with large jumps in their material coefficients. Such simulations are used, e.g., for the prediction of elastic properties. As the underlying microstructures have very complex geometries, a discretization by means of finite elements typically involves very fine resolved meshes. The latter results in discretized linear systems of more than \(10^8\) unknowns which need to be solved efficiently. However, the variation of the material coefficients even on very small scales reveals the failure of most available methods when solving the arising linear systems. While for scalar elliptic problems of multiscale character, robust domain decomposition methods are developed, their extension and application to 3D elasticity problems needs to be further established.
The focus of the thesis lies in the development and analysis of robust overlapping domain decomposition methods for multiscale problems in linear elasticity. The method combines corrections on local subdomains with a global correction on a coarser grid. As the robustness of the overall method is mainly determined by how well small scale features of the solution can be captured on the coarser grid levels, robust multiscale coarsening strategies need to be developed which properly transfer information between fine and coarse grids.
We carry out a detailed and novel analysis of two-level overlapping domain decomposition methods for the elasticity problems. The study also provides a concept for the construction of multiscale coarsening strategies to robustly solve the discretized linear systems, i.e. with iteration numbers independent of variations in the Young's modulus and the Poisson ratio of the underlying composite. The theory also captures anisotropic elasticity problems and allows applications to multi-phase elastic materials with non-isotropic constituents in two and three spatial dimensions.
Moreover, we develop and construct new multiscale coarsening strategies and show why they should be preferred over standard ones on several model problems. In a parallel implementation (MPI) of the developed methods, we present applications to real composites and robustly solve discretized systems of more than \(200\) million unknowns.