KLUEDO RSS FeedNeueste Dokumente / Latest documents
https://kluedo.ub.uni-kl.de/index/index/
Thu, 15 Jan 2009 15:20:51 +0100Thu, 15 Jan 2009 15:20:51 +0100Microstructural characterisation of open foams using 3d images
https://kluedo.ub.uni-kl.de/frontdoor/index/index/docId/2047
Open cell foams are a promising and versatile class of porous materials. Open metal foams serve as crash absorbers and catalysts, metal and ceramic foams are used for filtering, and open polymer foams are hidden in every-day-life items like mattresses or chairs. Due to their high porosity, classical 2d quantitative analysis can give only very limited information about the microstructure of open foams. On the other hand, micro computed tomography (μCT) yields high quality 3d images of open foams. Thus 3d imaging is the method of choice for open cell foams. In this report we summarise a variety of methods for the analysis of the resulting volume images of open foam structures developed or refined and applied at the Fraunhofer ITWM over a course of nearly ten years: The model based determination of mean characteristics like the mean cell volume or the mean strut thickness demanding only a simple binarisation as well as the image analytic cell reconstruction yielding empirical distributions of cell characteristics.K. Schladitz; C. Redenbach; T. Sych; M. Godehardtreporthttps://kluedo.ub.uni-kl.de/frontdoor/index/index/docId/2047Thu, 15 Jan 2009 15:20:51 +0100Anisotropy analysis of pressed point processes
https://kluedo.ub.uni-kl.de/frontdoor/index/index/docId/2003
This paper introduces methods for the detection of anisotropies which are caused by compression of regular three-dimensional point patterns. Isotropy tests based on directional summary statistics and estimators for the compression factor are developed. These allow not only for the detection of anisotropies but also for the estimation of their strength. Using simulated data the power of the methods and the dependence of the power on the intensity, the degree of regularity, and the compression strength are studied. The motivation of this paper is the investigation of anisotropies in the structure of polar ice. Therefore, our methods are applied to the point patterns of centres of air pores extracted from tomographic images of ice cores. This way the presence of anisotropies in the ice caused by the compression of the ice sheet as well as an increase of their strength with increasing depth are shown.C. Lautensack; A. Särkkä; J. Freitag; K. Schladitzreporthttps://kluedo.ub.uni-kl.de/frontdoor/index/index/docId/2003Wed, 25 Jun 2008 13:01:38 +0200Design of acoustic trim based on geometric modeling and flow simulation for non-woven
https://kluedo.ub.uni-kl.de/frontdoor/index/index/docId/1602
In order to optimize the acoustic properties of a stacked fiber non-woven, the microstructure of the non-woven is modeled by a macroscopically homogeneous random system of straight cylinders (tubes). That is, the fibers are modeled by a spatially stationary random system of lines (Poisson line process), dilated by a sphere. Pressing the non-woven causes anisotropy. In our model, this anisotropy is described by a one parametric distribution of the direction of the fibers. In the present application, the anisotropy parameter has to be estimated from 2d reflected light microscopic images of microsections of the non-woven. After fitting the model, the flow is computed in digitized realizations of the stochastic geometric model using the lattice Boltzmann method. Based on the flow resistivity, the formulas of Delany and Bazley predict the frequency-dependent acoustic absorption of the non-woven in the impedance tube. Using the geometric model, the description of a non-woven with improved acoustic absorption properties is obtained in the following way: First, the fiber thicknesses, porosity and anisotropy of the fiber system are modified. Then the flow and acoustics simulations are performed in the new sample. These two steps are repeatedc for various sets of parameters. Finally, the set of parameters for the geometric model leading to the best acoustic absorption is chosen.K. Schladitz; S. Peters; A. Reinel-Bitzer; A. Wiegmann; J. Ohserreporthttps://kluedo.ub.uni-kl.de/frontdoor/index/index/docId/1602Mon, 31 Jan 2005 16:38:20 +0100Diffraction by image processing and its application in materials science
https://kluedo.ub.uni-kl.de/frontdoor/index/index/docId/1587
A spectral theory for constituents of macroscopically homogeneous random microstructures modeled as homogeneous random closed sets is developed and provided with a sound mathematical basis, where the spectrum obtained by Fourier methods corresponds to the angular intensity distribution of x-rays scattered by this constituent. It is shown that the fast Fourier transform applied to three-dimensional images of microstructures obtained by micro-tomography is a powerful tool of image processing. The applicability of this technique is is demonstrated in the analysis of images of porous media.J. Ohser; K. Schladitz; K. Koch; N. Nöthereporthttps://kluedo.ub.uni-kl.de/frontdoor/index/index/docId/1587Mon, 29 Nov 2004 15:30:32 +0100Spectral Theory For Random Closed Sets And Estimating The Covariance Via Frequency Space
https://kluedo.ub.uni-kl.de/frontdoor/index/index/docId/1490
A spectral theory for stationary random closed sets is developed and provided with a sound mathematical basis. Definition and proof of existence of the Bartlett spectrum of a stationary random closed set as well as the proof of a Wiener-Khintchine theorem for the power spectrum are used to two ends: First, well known second order characteristics like the covariance can be estimated faster than usual via frequency space. Second, the Bartlett spectrum and the power spectrum can be used as second order characteristics in frequency space. Examples show, that in some cases information about the random closed set is easier to obtain from these characteristics in frequency space than from their real world counterparts.K. Koch; J. Ohser; K. Schladitzreporthttps://kluedo.ub.uni-kl.de/frontdoor/index/index/docId/1490Mon, 02 Feb 2004 15:33:30 +0100The Euler Number Of Discretized Sets - On The Choice Of Adjacency In Homogeneous Lattices
https://kluedo.ub.uni-kl.de/frontdoor/index/index/docId/1486
Two approaches for determining the Euler-Poincaré characteristic of a set observed on lattice points are considered in the context of image analysis { the integral geometric and the polyhedral approach. Information about the set is assumed to be available on lattice points only. In order to retain properties of the Euler number and to provide a good approximation of the true Euler number of the original set in the Euclidean space, the appropriate choice of adjacency in the lattice for the set and its background is crucial. Adjacencies are defined using tessellations of the whole space into polyhedrons. In R 3 , two new 14 adjacencies are introduced additionally to the well known 6 and 26 adjacencies. For the Euler number of a set and its complement, a consistency relation holds. Each of the pairs of adjacencies (14:1; 14:1), (14:2; 14:2), (6; 26), and (26; 6) is shown to be a pair of complementary adjacencies with respect to this relation. That is, the approximations of the Euler numbers are consistent if the set and its background (complement) are equipped with this pair of adjacencies. Furthermore, sufficient conditions for the correctness of the approximations of the Euler number are given. The analysis of selected microstructures and a simulation study illustrate how the estimated Euler number depends on the chosen adjacency. It also shows that there is not a uniquely best pair of adjacencies with respect to the estimation of the Euler number of a set in Euclidean space.J. Ohser; W. Nagel; K. Schladitzreporthttps://kluedo.ub.uni-kl.de/frontdoor/index/index/docId/1486Mon, 02 Feb 2004 15:00:22 +0100