KLUEDO RSS FeedKLUEDO Dokumente/documents
https://kluedo.ub.uni-kl.de/index/index/
Wed, 18 Jun 2008 15:28:21 +0200Wed, 18 Jun 2008 15:28:21 +0200An efficient approach for upscaling properties of composite materials with high contrast of coefficients
https://kluedo.ub.uni-kl.de/frontdoor/index/index/docId/1987
An efficient approach for calculating the effective heat conductivity for a class of industrial composite materials, such as metal foams, fibrous glass materials, and the like, is discussed. These materials, used in insulation or in advanced heat exchangers, are characterized by a low volume fraction of the highly conductive material (glass or metal) having a complex, network-like structure and by a large volume fraction of the insulator (air). We assume that the composite materials have constant macroscopic thermal conductivity tensors, which in principle can be obtained by standard up-scaling techniques, that use the concept of representative elementary volumes (REV), i.e. the effective heat conductivities of composite media can be computed by post-processing the solutions of some special cell problems for REVs. We propose, theoretically justify, and numerically study an efficient approach for calculating the effective conductivity for media for which the ratio of low and high conductivities satisfies 1. In this case one essentially only needs to solve the heat equation in the region occupied by the highly conductive media. For a class of problems we show, that under certain conditions on the microscale geometry, the proposed approach produces an upscaled conductivity that is O() close to the exact upscaled permeability. A number of numerical experiments are presented in order to illustrate the accuracy and the limitations of the proposed method. Applicability of the presented approach to upscaling other similar problems, e.g. flow in fractured porous media, is also discussed.R. Ewing; O. Iliev; R. Lazarov; I. Rybak; J. Willemsreporthttps://kluedo.ub.uni-kl.de/frontdoor/index/index/docId/1987Wed, 18 Jun 2008 15:28:21 +0200On two-level preconditioners for flow in porous media
https://kluedo.ub.uni-kl.de/frontdoor/index/index/docId/1975
Two-level domain decomposition preconditioner for 3D flows in anisotropic highly heterogeneous porous media is presented. Accurate finite volume discretization based on multipoint flux approximation (MPFA) for 3D pressure equation is employed to account for the jump discontinuities of full permeability tensors. DD/MG type preconditioner for above mentioned problem is developed. Coarse scale operator is obtained from a homogenization type procedure. The influence of the overlapping as well as the influence of the smoother and cell problem formulation is studied. Results from numerical experiments are presented and discussed.R. Ewing; O. Iliev; R. Lazarov; I. Rybakreporthttps://kluedo.ub.uni-kl.de/frontdoor/index/index/docId/1975Wed, 28 May 2008 10:24:09 +0200On convergence of certain finite difference discretizations for 1D poroelasticity interface problems
https://kluedo.ub.uni-kl.de/frontdoor/index/index/docId/1599
Finite difference discretizations of 1D poroelasticity equations with discontinuous coefficients are analyzed. A recently suggested FD discretization of poroelasticity equations with constant coefficients on staggered grid, [5], is used as a basis. A careful treatment of the interfaces leads to harmonic averaging of the discontinuous coefficients. Here, convergence for the pressure and for the displacement is proven in certain norms for the scheme with harmonic averaging (HA). Order of convergence 1.5 is proven for arbitrary located interface, and second order convergence is proven for the case when the interface coincides with a grid node. Furthermore, following the ideas from [3], modified HA discretization are suggested for particular cases. The velocity and the stress are approximated with second order on the interface in this case. It is shown that for wide class of problems, the modified discretization provides better accuracy. Second order convergence for modified scheme is proven for the case when the interface coincides with a displacement grid node. Numerical experiments are presented in order to illustrate our considerations.R. Ewing; O. Iliev; R. Lazarov; A. Naumovichreporthttps://kluedo.ub.uni-kl.de/frontdoor/index/index/docId/1599Mon, 31 Jan 2005 16:32:30 +0100