Kaiserslautern - Fachbereich Maschinenbau und Verfahrenstechnik
Refine
Year of publication
Document Type
- Article (146)
- Doctoral Thesis (143)
- Preprint (9)
- Habilitation (4)
- Conference Proceeding (1)
- Diploma Thesis (1)
- Working Paper (1)
Language
- English (305) (remove)
Has Fulltext
- yes (305)
Keywords
Faculty / Organisational entity
A potential fucoidan-based PEGylated PLGA nanoparticles (NPs) offering a proper delivery of N-methyl anthranilic acid (MA, a model of hydrophobic anti-inflammatory drug) have been
developed via the formation of fucoidan aqueous coating surrounding PEGylated PLGA NPs. The optimum formulation (FuP2) composed of fucoidan:m-PEG-PLGA (1:0.5 w/w) with particle size(365 ± 20.76 nm), zeta potential (-22.30 ± 2.56 mV), % entrapment efficiency (85.45 ± 7.41), drug loading (51.36 ± 4.75 µg/mg of NPs), % initial burst (47.91 ± 5.89), and % cumulative release
(102.79 ± 6.89) has been further investigated for the anti-inflammatory in vivo study. This effect of
FuP2 was assessed in rats’ carrageenan-induced acute inflammation model. The average weight of the
paw edema was significantly lowered (p ≤ 0.05) by treatment with FuP2. Moreover, cyclooxygenase-2 and tumor necrosis factor-alpha immunostaining were decreased in FuP2 treated group compared to the other groups. The levels of prostaglandin E2, nitric oxide, and malondialdehyde were significantly
reduced (p ≤ 0.05) in the FuP2-treated group. A significant reduction (p ≤ 0.05) in the expression
of interleukins (IL-1b and IL-6) with an improvement of the histological findings of the paw tissues was observed in the FuP2-treated group. Thus, fucoidan-based PEGylated PLGA–MA NPs are a promising anti-inflammatory delivery system that can be applied for other similar drugs potentiating their pharmacological and pharmacokinetic properties.
With the burgeoning computing power available, multiscale modelling and simulation has these days become increasingly capable of capturing the details of physical processes on different scales. The mechanical behavior of solids is oftentimes the result of interaction between multiple spatial and temporal scales at different levels and hence it is a typical phenomena of interest exhibiting multiscale characteristic. At the most basic level, properties of solids can be attributed to atomic interactions and crystal structure that can be described on nano scale. Mechanical properties at the macro scale are modeled using continuum mechanics for which we mention stresses and strains. Continuum models, however they offer an efficient way of studying material properties they are not accurate enough and lack microstructural information behind the microscopic mechanics that cause the material to behave in a way it does. Atomistic models are concerned with phenomenon at the level of lattice thereby allowing investigation of detailed crystalline and defect structures, and yet the length scales of interest are inevitably far beyond the reach of full atomistic computation and is rohibitively expensive. This makes it necessary the need for multiscale models. The bottom line and a possible avenue to this end is, coupling different length scales, the continuum and the atomistics in accordance with standard procedures. This is done by recourse to the Cauchy-Born rule and in so doing, we aim at a model that is efficient and reasonably accurate in mimicking physical behaviors observed in nature or laboratory. In this work, we focus on concurrent coupling based on energetic formulations that links the continuum to atomistics. At the atomic scale, we describe deformation of the solid by the displaced positions of atoms that make up the solid and at the continuum level deformation of the solid is described by the displacement field that minimize the total energy. In the coupled model, continuum-atomistic, a continuum formulation is retained as the overall framework of the problem and the atomistic feature is introduced by way of constitutive description, with the Cauchy-Born rule establishing the point of contact. The entire formulation is made in the framework of nonlinear elasticity and all the simulations are carried out within the confines of quasistatic settings. The model gives direct account to measurable features of microstructures developed by crystals through sequential lamination.
In this work the investigation of a (Ti, Al, Si) N system was done. The main point of investigation was to study the possibility of getting the nanocomposite coatings structures by deposition of multilayer films from TiN, AlSiN, . This tries to understand the relation between the mechanical properties (hardness, Young s modulus), and the microstructure (nanocrystalline with individual phases). Particularly special attention was given to the temperature effects on microstructural changes in annealing at 600 °C for the coatings. The surface hardness, elastic modulus, and the multilayers diffusion and compositions were the test tools for the comparison between the different coated samples with and without annealing at 600 °C. To achieve this object a rectangular aluminum vacuum chamber with three unbalanced sputtering magnetrons for the deposition of thin film coatings from different materials was constructed The chamber consists mainly of two chambers, the pre-vacuum chamber to load the workpiece, and the main vacuum chamber where the sputtering deposition of the thin film coatings take place. The workpiece is moving on a car travel on a railway between the two chambers to the position of the magnetrons by step motors. The chambers are divided by a self constructed rectangular gate controlled manually from outside the chamber. The chamber was sealed for vacuum use using glue and screws. Therefore, different types of glue were tested not only for its ability to develop an uniform thin layer in the gap between the aluminum plates to seal the chamber for vacuum use, but also low outgassing rates which made it suitable for vacuum use. A epoxy was able to fulfill this tasks. The evacuation characteristics of the constructed chamber was improved by minimizing the inner surface outgassing rate. Therefore, the throughput outgassing rate test method was used in the comparisons between the selected two aluminum materials (A2017 and A5353) samples short time period (one hour) outgassing rates. Different machining methods and treatments for the inner surface of the vacuum chamber were tested. The machining of the surface of material A (A2017) with ethanol as coolant fluid was able to reduce its outgassing rate a factor of 6 compared with a non-machined sample surface of the same material. The reduction of the surface porous oxide layer on the top of the aluminum surface by the pickling process with HNO3 acid, and the protection of it by producing another passive non-porous oxides layer using anodizing process will protect the surface for longer time and will minimize the outgassing rates even under humid atmosphere The residual gas analyzer (RGA) 6. Summary test shows that more than 85% of the gases inside the test chamber were water vapour (H2O) and the rests are (N2, H2, CO), so liquid nitrogen water vapor trap can enhance the chamber pumping down process. As a result it was possible to construct a chamber that can be pumped down using a turbo molecular pump (450 L/s) to the range of 1x10-6 mbar within one hour of evacuations where the chamber volume is 160 Litters and the inner surface area is 1.6 m2. This is a good base pressure for the process of sputtering deposition of hard thin film coatings. Multilayer thin film coating was deposited to demonstrate that nanostructured thin film within the (Ti, Al, Si) N system could be prepared by reactive magnetron sputtering of multi thin film layers of TiN, AlSiN. The (SNMS) spectrometry of the test samples show that a complete diffusion between the different deposited thin film coating layers in each sample takes place, even at low substrate deposition temperature. The high magnetic flux of the unbalanced magnetrons and the high sputtering power were able to produce a high ion-toatom flux, which give high mobility to the coated atoms. The interactions between the high mobility of the coated atoms and the ion-to-atom flux were sufficient to enhance the diffusion between the different deposited thin layers. It was shown from the XRD patterns for this system that the structure of the formed mixture consists of two phases. One phase is noted as TiN bulk and another detected unknown amorphous phase, which can be SiNx or AlN or a combination of Ti-Al-Si-N. As a result we where able to deposit a nanocomposite coatings by the deposition of multilayers from TiN, AlSiN thin film coatings using the constructed vacuum chamber
Hydrogels are known to be covalently or ionic cross-linked, hydrophilic three-dimensional
polymer networks, which exist in our bodies in a biological gel form such as the vitreous
humour that fills the interior of the eyes. Poly(N-isopropylacrylamide) (poly(NIPAAm))
hydrogels are attracting more interest in biomedical applications because, besides others, they
exhibit a well-defined lower critical solution temperature (LCST) in water, around 31–34°C,
which is close to the body temperature. This is considered to be of great interest in drug
delivery, cell encapsulation, and tissue engineering applications. In this work, the
poly(NIPAAm) hydrogel is synthesized by free radical polymerization. Hydrogel properties
and the dimensional changes accompanied with the volume phase transition of the
thermosensitive poly(NIPAAm) hydrogel were investigated in terms of Raman spectra,
swelling ratio, and hydration. The thermal swelling/deswelling changes that occur at different
equilibrium temperatures and different solutions (phenol, ethanol, propanol, and sodium
chloride) based on Raman spectrum were investigated. In addition, Raman spectroscopy has
been employed to evaluate the diffusion aspects of bovine serum albumin (BSA) and phenol
through the poly(NIPAAm) network. The determination of the mutual diffusion coefficient,
\(D_{mut}\) for hydrogels/solvent system was achieved successfully using Raman spectroscopy at
different solute concentrations. Moreover, the mechanical properties of the hydrogel, which
were investigated by uniaxial compression tests, were used to characterize the hydrogel and to
determine the collective diffusion coefficient through the hydrogel. The solute release coupled
with shrinking of the hydrogel particles was modelled with a bi-dimensional diffusion model
with moving boundary conditions. The influence of the variable diffusion coefficient is
observed and leads to a better description of the kinetic curve in the case of important
deformation around the LCST. A good accordance between experimental and calculated data
was obtained.
This research explores the development of web based reference software for
characterisation of surface roughness for two-dimensional surface data. The reference software used for verification of surface characteristics makes the evaluation methods easier for clients. The algorithms used in this software
are based on International ISO standards. Most software used in industrial measuring
instruments may give variations in the parameters calculated due to numerical changes in
calculation. Such variations can be verified using the proposed reference software.
The evaluation of surface roughness is carried out in four major steps: data capture, data
align, data filtering and parameter calculation. This work walks through each of these steps
explaining how surface profiles are evaluated by pre-processing steps called fitting and
filtering. The analysis process is then followed by parameter evaluation according to DIN EN
ISO 4287 and DIN EN ISO 13565-2 standards to extract important information from the
profile to characterise surface roughness.
Simulation of Particle Interaction with Surface Microdefects during Cold Gas-Dynamic Spraying
(2022)
The cold gas-dynamic spray (CGDS) technique is utilized for repairing processes of a
large number of metallic components in mechanical and process engineering, such as bridges or
vehicles. Fine particles impacting on the component surface can be severely deformed and penetrate
into the defects, filling and coating them, resulting in possible protection against corrosion or crack
propagation. This work focuses on the investigation of the impact behavior of cold sprayed particles
with the wall surface having microdefects in the form of cavities. The collision of fine single particles
with the substrate, both made from AISI 1045 steel, was simulated with the finite element method
(FEM) using the Johnson–Cook failure model. The impact phenomena of particles on different
microdefect geometries were obtained and compared with the collision on a smooth surface. The
particle diameter and defect were varied to investigate the influence of the size on the deformation
behaviour. The different impact scenarios result in different temperature and stress distributions in
the contact zone, penetration and deformation behavior during the collision.
The growing computational power enables the establishment of the Population Balance Equation (PBE)
to model the steady state and dynamic behavior of multiphase flow unit operations. Accordingly, the twophase
flow
behavior inside liquid-liquid extraction equipment is characterized by different factors. These
factors include: interactions among droplets (breakage and coalescence), different time scales due to the
size distribution of the dispersed phase, and micro time scales of the interphase diffusional mass transfer
process. As a result of this, the general PBE has no well known analytical solution and therefore robust
numerical solution methods with low computational cost are highly admired.
In this work, the Sectional Quadrature Method of Moments (SQMOM) (Attarakih, M. M., Drumm, C.,
Bart, H.-J. (2009). Solution of the population balance equation using the Sectional Quadrature Method of
Moments (SQMOM). Chem. Eng. Sci. 64, 742-752) is extended to take into account the continuous flow
systems in spatial domain. In this regard, the SQMOM is extended to solve the spatially distributed
nonhomogeneous bivariate PBE to model the hydrodynamics and physical/reactive mass transfer
behavior of liquid-liquid extraction equipment. Based on the extended SQMOM, two different steady
state and dynamic simulation algorithms for hydrodynamics and mass transfer behavior of liquid-liquid
extraction equipment are developed and efficiently implemented. At the steady state modeling level, a
Spatially-Mixed SQMOM (SM-SQMOM) algorithm is developed and successfully implemented in a onedimensional
physical spatial domain. The integral spatial numerical flux is closed using the mean mass
droplet diameter based on the One Primary and One Secondary Particle Method (OPOSPM which is the
simplest case of the SQMOM). On the other hand the hydrodynamics integral source terms are closed
using the analytical Two-Equal Weight Quadrature (TEqWQ). To avoid the numerical solution of the
droplet rise velocity, an analytical solution based on the algebraic velocity model is derived for the
particular case of unit velocity exponent appearing in the droplet swarm model. In addition to this, the
source term due to mass transport is closed using OPOSPM. The resulting system of ordinary differential
equations with respect to space is solved using the MATLAB adaptive Runge–Kutta method (ODE45). At
the dynamic modeling level, the SQMOM is extended to a one-dimensional physical spatial domain and
resolved using the finite volume method. To close the mathematical model, the required quadrature nodes
and weights are calculated using the analytical solution based on the Two Unequal Weights Quadrature
(TUEWQ) formula. By applying the finite volume method to the spatial domain, a semi-discreet ordinary
differential equation system is obtained and solved. Both steady state and dynamic algorithms are
extensively validated at analytical, numerical, and experimental levels. At the numerical level, the
predictions of both algorithms are validated using the extended fixed pivot technique as implemented in
PPBLab software (Attarakih, M., Alzyod, S., Abu-Khader, M., Bart, H.-J. (2012). PPBLAB: A new
multivariate population balance environment for particulate system modeling and simulation. Procedia
Eng. 42, pp. 144-562). At the experimental validation level, the extended SQMOM is successfully used
to model the steady state hydrodynamics and physical and reactive mass transfer behavior of agitated
liquid-liquid extraction columns under different operating conditions. In this regard, both models are
found efficient and able to follow liquid extraction column behavior during column scale-up, where three
column diameters were investigated (DN32, DN80, and DN150). To shed more light on the local
interactions among the contacted phases, a reduced coupled PBE and CFD framework is used to model
the hydrodynamic behavior of pulsed sieve plate columns. In this regard, OPOSPM is utilized and
implemented in FLUENT 18.2 commercial software as a special case of the SQMOM. The dropletdroplet
interactions
(breakage
and
coalescence)
are
taken
into
account
using
OPOSPM,
while
the
required
information
about
the
velocity
field
and
energy
dissipation
is
calculated
by
the
CFD
model.
In
addition
to
this,
the proposed coupled OPOSPM-CFD framework is extended to include the mass transfer. The
proposed framework is numerically tested and the results are compared with the published experimental
data. The required breakage and coalescence parameters to perform the 2D-CFD simulation are estimated
using PPBLab software, where a 1D-CFD simulation using a multi-sectional gird is performed. A very
good agreement is obtained at the experimental and the numerical validation levels.
The detection and characterisation of undesired lead structures on shaft surfaces is a concern in production and quality control of rotary shaft lip-type sealing systems. The potential lead structures are generally divided into macro and micro lead based on their characteristics and formation. Macro lead measurement methods exist and are widely applied. This work describes a method to characterise micro lead on ground shaft surfaces. Micro lead is known as the deviation of main orientation of the ground micro texture from circumferential direction. Assessing the orientation of microscopic structures with arc minute accuracy with regard to circumferential direction requires exact knowledge of both the shaft’s orientation and the direction of surface texture. The shaft’s circumferential direction is found by calibration. Measuring systems and calibration procedures capable of calibrating shaft axis orientation with high accuracy and low uncertainty are described. The measuring systems employ areal-topographic measuring instruments suited for evaluating texture orientation. A dedicated evaluation scheme for texture orientation is based on the Radon transform of these topographies and parametrised for the application. Combining the calibration of circumferential direction with the evaluation of texture orientation the method enables the measurement of micro lead on ground shaft surfaces.
The increasing parallelisation of development processes as well as the ongoing trends towards virtual product development and outsourcing of development activities strengthen the need for 3D co-operative design via communication networks. Regarding the field of CAx, none of the existing systems meets all the requirements of very complex process chain. This leads to a tremendous need for the integration of heterogeneous CAx systems. Therefore, MACAO, a platform-independent client for a distributed CAx component system, the so-called ANICA CAx object bus, is presented. The MACAO client is able to access objects and functions provided by different CAx servers distributed over a communication network. Thus, MACAO is a new solution for engineering design and visualisation in shared distributed virtual environments. This paper describes the underlying concepts, the actual prototype implementation, as well as possible application scenarios in the area of co-operative design and visualisation.
Interoperability between different CAx systems involved in the development process of cars is presently one of the most critical issues in the automotive industry. None of the existing CAx systems meets all requirements of the very complex process network of the lifecycle of a car. With this background, industrial engineers have to use various CAx systems to get an optimal support for their daily work. Today, the communication between different CAx systems is done via data files using special direct converters or neutral system independent standards like IGES, VDAFS, and recently STEP, the international standard for product data description. To reduce the dependency on individual CAx s ystem vendors, the German automotive industry developed an open CAx system architecture based on STEP as guiding principle for CAx system development. The central component of this architecture is a common, system-independent access interface to CAx functions and data of all involved CAx systems, which is under development in the project ANICA. Within this project, a CAx object bus has been developed based on a STEP data description using CORBA as an integration platform. This new approach allows a transparent access to data and functions of the integrated CAx systems without file-based data exchange. The product development process with various CAx systems concerns objects from different CAx systems. Thus, mechanisms are needed to handle the persistent storage of the CAx objects distributed over the CAx object bus to give the developing engineers a consistent view of the data model of their product. The following paper discusses several possibilities to guarantee consistent data management and storage of distributed CAx models. One of the most promising approaches is the enhancement of the CAx object bus by a STEP-based object-oriented data server to realise a central data management.