Refine
Year of publication
- 2005 (58) (remove)
Document Type
- Doctoral Thesis (58) (remove)
Has Fulltext
- yes (58)
Keywords
- Mobilfunk (3)
- Computeralgebra (2)
- Flüssig-Flüssig-Extraktion (2)
- Geometric Ergodicity (2)
- Rotordynamik (2)
- Stoffübergang (2)
- air interface (2)
- mobile radio (2)
- Ab-initio-Rechnung (1)
- Abgasnachbehandlung (1)
Faculty / Organisational entity
- Kaiserslautern - Fachbereich Maschinenbau und Verfahrenstechnik (17)
- Kaiserslautern - Fachbereich Mathematik (16)
- Kaiserslautern - Fachbereich Chemie (12)
- Kaiserslautern - Fachbereich Elektrotechnik und Informationstechnik (6)
- Kaiserslautern - Fachbereich Biologie (4)
- Kaiserslautern - Fachbereich Informatik (2)
- Kaiserslautern - Fachbereich ARUBI (1)
Anthocyane, eine Untergruppe der Flavonoide, sind als natürliche Farbpigmente weit verbreitet in Lebensmitteln pflanzlicher Herkunft. Ihnen werden eine Reihe von gesundheitlich positiven Wirkungen zugeschrieben, was dazu geführt hat, dass auf dem Markt für Nahrungsergänzungsmittel immer mehr Produkte auf Anthocyanbasis auftauchen. Als ein möglicher nachteiliger Faktor für eine potentielle genotoxische Wirkung von Flavonoiden wird die Interaktion mit humanen Topoisomerasen diskutiert. Bezüglich einer möglichen Risiko/Nutzen-Evaluierung ist es nicht nur von Bedeutung, ob Flavonoide/Anthocyane mit diesen Enzymen interagieren, sondern auch die Art dieser Interaktion und sich möglicherweise daraus ergebende Konsequenzen, besonders im Hinblick auf die Integrität der DNA. Ziel der vorliegenden Arbeit war es, die Anthocyanidine Delphinidin (Del), Cyanidin (Cy), Pelargonidin (Pg), Paeonidin (Pn) und Malvidin (Mv) hinsichtlich ihrer Beeinflussung humaner Topoisomerase I und II zu untersuchen. Ein Schwerpunkt lag bei der Aufklärung des Wirkmechanismus dieser Verbindungen bezüglich einer Stabilisierung des Cleavable Complex, möglichen Interaktionen mit der DNA und die Relevanz dieser Effekte für die Integrität zellulärer DNA. Es konnte gezeigt werden, dass nur die Verbindungen mit vicinalen Hydroxygruppen im B-Ring des Anthocyangrundgerüstes, Del und Cy, effektiv die katalytische Aktivität isolierter humaner Topoisomerase I und Topoisomerase IIalpha + IIbeta hemmen. Sie wirken jedoch nicht wie die klassischen Topoisomerasegifte Camptothecin oder Etoposid über die Stabilisierung des kovalenten Topoisomerase-DNA-Komplexes, sondern stellen rein katalytische Inhibitoren dar. Del und Cy könnten sogar die DNA vor Topoisomerase I-Giften schützen, da sie zumindest am isolierten Enzym die Stabilisierung des Cleavable Complex der Topoisomerase I durch Camptothecin effektiv verhindern. Für alle getesteten Anthocyanidine konnte gezeigt werden, dass sie im niedrigen mikromolaren Bereich, zwischen 15 µM und 50 µM, sowohl an die kleine Furche der DNA binden, als auch in die DNA interkalieren können und das diese DNA-interagierenden Eigenschaften keinen wesentlichen Beitrag zur Hemmung der Topoisomerasen liefern. Auch wenn im Falle der Anthocyanidine die direkte DNA-Interaktion im Hinblick auf die Topoisomerasehemmung nur von geringer Bedeutung ist, so scheint sie jedoch relevant bezüglich der Integrität zellulärer DNA zu sein. Die einstündige Inkubation von HT29 Kolonkarzinomzellen zeigte, dass bei Inkubation mit den Anthocyanidinen in Konzentrationen >50 µM, signifikant DNA-Schäden induziert werden. Im Hinblick auf die Integrität der DNA lebender Zellen scheint der jeweilige Konzentrationsbereich von entscheidender Bedeutung zu sein. Ein weiterer Schwerpunkt der vorliegenden Arbeit war es, den Einfluss der Überexpression der Tyrosyl-DNA-Phosphodiesterase 1 (TDP1) nach Inkubation mit Topoisomerasegiften zu untersuchen. Im Rahmen einer Kooperation mit Prof. Boege, Universitätsklinikum Düsseldorf, wurden uns verschiedene Zellklone zur Verfügung gestellt, die ein Fusionsprotein aus TDP1 und GFP überexprimierten, sowie eine katalytisch inaktive Variante des Enzymes (TDP1-H263A). Im Rahmen dieser Arbeit wurden Untersuchungen an diesen Zelllinien zur Zytotoxizität von Topoisomerasegiften durchgeführt, sowie Untersuchungen zum Einfluss der TDP1 auf die Induktion von DNA-Schäden durch Topoisomerasegifte. Untersuchungen zum Zellwachstum der verschiedenen Zelllinien mittels MTT-Zytotoxiziätsassay zeigten nach 72 stündiger Inkubation mit den Topoisomerasegiften Camptothecin (Topo I) und Etoposid (Topo II) keinen signifikanten Wachstumsvorteil bei Überexpression der TDP1. Betrachtet man jedoch die Induktion von DNA-Schäden bei Kurzzeitinkubationen (1h) von Camptothecin im Comet-Assay, so erkennt man eine signifikante Reduktion der DNA-Schäden bei Überexpression der TDP1. Ist bei der TDP1 das katalytische Histidin 263 gegen Alanin ausgetauscht, steigen die DNA-Schäden auf das gleiche Niveau wie bei nicht TDP1-überexprimierenden Zellen, d.h. es findet keine Reparatur statt. Erstaunlicherweise zeigte sich auch bei der Inkubation mit dem Topoisomerase II-Gift Etoposid, welches ursprünglich als Negativkontrolle gedacht war, der gleiche Reparatureffekt. Eine Hochregulation DNA-reparierender Enzyme ist unwahrscheinlich, da bei Inkubation mit dem DNA-methylierenden Agens N-methyl-N'-nitro-N-nitrosoguanidin (MNNG) alle Zelllinien eine vergleichbare Menge an DNA-Schäden aufwiesen. Die nunmehr erzielten Ergebnisse eröffnen erstmals die Möglichkeit den Comet-Assay, unter Verwendung der unterschiedlichen TDP1-Klone, zum Auffinden von TDP1-Hemmstoffen einzusetzen.
Externe elektrische Gleichspannungsfelder können sowohl den physikalischen, als auch den reaktiven Stoffaustausch bei der Flüssig-Flüssig Extraktion signifikant beeinflussen, wodurch eine Steigerung des Stoffüberganges im elektrischen Feld erzielt werden kann. Die Gründe hierfür sind im elektrischen Feld gesteigerte Grenzflächenturbulenzen und feldinduzierte Konzentrationspolarisationen im Phasengrenzflächenbereich, welche durch Migrationswechselwirkungen verursacht werden. Das elektrische Feld hat bezüglich des reaktiven Stoffübergangs sowohl in Einzel- als auch im Mehrkomponentensystem keinen Einfluss auf das chemische Gleichgewicht. Jedoch wird durch das Feld die Kinetik beschleunigt und das Gleichgewicht schneller erreicht. Auch die maximale Trennselektivität im Mehrkomponentensystem, welche im Gleichgewicht erreicht wird, wird nicht durch das Feld verändert. Diese ist primär von der Konzentration und der Säurestärke abhängig. Lediglich im Falle sehr schwacher Säuren ist das Gleichgewicht über das natürliche hinaus verschiebbar. Diese Stoffaustauscherhöhung ist durch die im elektrischen Feld erhöhte Dissoziation der Übergangskomponente gemäß dem 2. Wien’schen Effekt erklärbar. Zudem ist die feldinduzierte Stoffaustauscherhöhung stark von der Feldwirkrichtung abhängig. Der Feldeinfluss ist dann maximal, wenn das Feld direkt in Stoffübergangs-richtung wirkt. Dies ist bei unbewegten (z. B. planaren) Grenzflächen erreichbar. So konnte in planaren Stoffübergangszellen und am hängenden Tropfen eine starke Stoffaus-tauschbeschleunigung in der Größenordnung von ca. 1000 % erzielt werden. Am bewegten Tropfen konnte zwar eine Stoffaustauscherhöhung durch die im Feld geänderten hydrodynamischen Betriebsgrößen (wie Tropfengröße und Verweilzeit) erzielt werden, jedoch konnte darüber hinaus keine weitere Stoffaustauschbeschleunigung erzielt werden. Dies kann damit erklärt werden, dass bei bewegter sphärischer Grenzflächengeometrie das Feld nicht nur in Stoffübergangsrichtung wirkt und feldinduzierte Polarisations-erscheinungen sich weitgehend kompensieren. Daher gelingt in klassischen Extraktionsapparaten, welche mit Dispergierung und Tropfen-bildung arbeiten, die Verfahrensumsetzung der kontinuierlich betriebenen Extraktion im Hochspannungsfeld nicht effizient. Diese gelingt in einem speziellen Zentrifugalextraktor, dem Taylor-Couette Elektroextraktor, in wessen Ringsspalt zwischen zwei als Elektroden fungierenden, konzentrischen Zylindern auf Grund der Rotationsbewegung sich eine planaranaloge, zylindrische Phasengrenzfläche ausbildet und das Feld somit direkt in Stoffübergangsrichtung wirken kann. Auch wird der stationäre Betriebszustand binnen weniger Minuten erreicht. Zudem entstehen im Phasengrenzbereich Taylorverwirblungen, welche ebenfalls den Stoffaustausch erhöhen. Zur theoretischen Beschreibung konnten Stoffübergangsmodelle entwickelt werden, welche die feldinduzierten Polarisationseffekte berücksichtigen. So gelingt die Berechnung des reaktiven Stoffaustauschs über ein elektrostatisch erweitertes Kinetikmodell, welches neben der chemischen Reaktion, der Grenzflächenadsorption des Ionenaustauschers und dem Reaktionsgleichgewicht, auch die Migration über die Nernst Planck Gleichung, sowie auch die Elektrodissoziation über einen Ansatz nach Onsager berücksichtigt. Die Berücksichtigung der im elektrischen gesteigerten Grenzflächenturbulenz gelingt über einen elektrostatisch erweiterten Ansatz nach Maroudas und Sawistowski. Auch wurde ein Modell zur Berechnung des Stoffübergangs im Taylor-Couette Extraktors vorgestellt. Die Berechnung der anliegenden elektrischen Felder gelingt über die Finite Elemente Methode basierend auf den Maxwell’schen Gleichungen oder vereinfacht über die Laplace Gleichung. Wesentlich ist, dass nicht die Elektrodenpotentialdifferenz, sondern das berechnete Potential an der Phasengrenzfläche den Stofftransfer im elektrischen Feld bestimmt, was durch die Simulationsrechnungen bestätigt wurde.
In dieser Arbeit wurden auf der Basis des felinen Foamyvirus (FFV) bzw. Spumaretrovirus diverse replikationsdefiziente Vektoren entwickelt und deren Tranduktionseffizienz, Stabilität, Markergenexpression und biologische Sicherheit unter Zellkulturbedingungen charakterisiert. Ausgehend von replikationskompetenten FFV-Vektoren wurden zunächst so genannte selbst-inaktivierende (SIN) Vektoren, in welchen die LTR-Promotoraktivität inhibiert ist, konstruiert. Diese FFV-SIN-Vektoren erlaubten eine stabile Transduktion und Markergenexpression, entwickelten jedoch nach einer begrenzten Zeit replikationskompetente Revertanten und waren daher nicht zur Transduktion langlebiger Zellen geeignet. In Analogie zu humanen Foamyvirus-basierenden Vektoren wurde anschließend ein Großteil der env-Sequenz aus den SIN-Vektoren deletiert, um die biologische Sicherheit der Vektoren zu erhöhen. Diese Env-deletierten und FFV-Promotor-abhängigen Vektoren waren allerdings aufgrund eines schwachen und schnell abklingenden Markergentransfers nicht zur effizienten und stabilen Markergentransduktion geeignet. Zur Entwicklung replikationsdefizienter Vektoren mit einem starken heterologen Promotor zur Markergenexpression wurden verschiedene Deletionen in das Vektorgenom eingeführt und Helferplasmide für die Strukturgene bzw. viralen Enzyme kloniert. Hiermit wurde ein transientes Transfektionssystem zur Produktion von Vektorpartikeln etabliert, wobei die für den Markergentransfer essentiellen cis-agierenden Sequenzen auf dem FFV-Genom identifiziert wurden. Die Lokalisation zweier essentieller cis-agierender Sequenzen am 5’-Ende des Genoms und in pol ermöglichte die anschließende Konstruktion replikationsdefizienter Bel1-unabhängiger Vektoren, in denen die 3’ von pol liegenden Gene fast vollständig deletiert und durch eine Expressionskassette, bestehend aus dem humanen Ubiquitin C-Promotor und dem lacZ-Gen, ersetzt wurden. Diese neuen FFV-basierenden Vektoren erlauben einen effizienten Markergentransfer und ermöglichen eine stabile Transduktion diverser Zielzellen bei gleichzeitiger nicht nachweisbarer viraler Genexpression und replikationskompetenter Revertanten. Daher sind diese Vektoren biologisch sicher, zur Transduktion langlebiger Zellen geeignet und können daher für gentherapeutische Untersuchungen in tierexperimentellen Modellen verwendet werden.
In this dissertation a model of melt spinning (by Doufas, McHugh and Miller) has been investigated. The model (DMM model) which takes into account effects of inertia, air drag, gravity and surface tension in the momentum equation and heat exchange between air and fibre surface, viscous dissipation and crystallization in the energy equation also has a complicated coupling with the microstructure. The model has two parts, before onset of crystallization (BOC) and after onset of crystallization (AOC) with the point of onset of crystallization as the unknown interface. Mathematically the model has been formulated as a Free boundary value problem. Changes have been introduced in the model with respect to the air drag and an interface condition at the free boundary. The mathematical analysis of the nonlinear, coupled free boundary value problem shows that the solution of this problem depends heavily on initial conditions and parameters which renders the global analysis impossible. But by defining a physically acceptable solution, it is shown that for a more restricted set of initial conditions if a unique solution exists for IVP BOC then it is physically acceptable. For this the important property of the positivity of the conformation tensor variables has been proved. Further it is shown that if a physically acceptable solution exists for IVP BOC then under certain conditions it also exists for IVP AOC. This gives an important relation between the initial conditions of IVP BOC and the existence of a physically acceptable solution of IVP AOC. A new investigation has been done for the melt spinning process in the framework of classical mechanics. A Hamiltonian formulation has been done for the melt spinning process for which appropriate Poisson brackets have been derived for the 1-d, elongational flow of a viscoelastic fluid. From the Hamiltonian, cross sectionally averaged balance mass and momentum equations of melt spinning can be derived along with the microstructural equations. These studies show that the complicated problem of melt spinning can also be studied under the framework of classical mechanics. This work provides the basic groundwork on which further investigations on the dynamics of a fibre could be carried out. The Free boundary value problem has been solved numerically using shooting method. Matlab routines have been used to solve the IVPs arising in the problem. Some numerical case studies have been done to study the sensitivity of the ODE systems with respect to the initial guess and parameters. These experiments support the analysis done and throw more light on the stiff nature and ill posedness of the ODE systems. To validate the model, simulations have been performed on sets of data provided by the company. Comparison of numerical results (axial velocity profiles) has been done with the experimental profiles provided by the company. Numerical results have been found to be in excellent agreement with the experimental profiles.
Under physiological conditions oxygen is constantly being converted to reactive oxygen intermediates, in mitochondria, peroxisomes, cytochrome p450 systems, macrophages, neutrophils and in plasma membranes. These reactive oxygen species (ROS) are toxic and therefore alter cell integrity leading to cell damage. To protect itself against this toxic effect of ROS, living systems have developed defence systems that scavenge ROS formation. These systems include some enzymes, transporting proteins and small antioxidant molecules for instance vitamin C and E. This thesis describes a study on the antioxidant chemistry and activity of vitamin C in vivo and in vitro systems using ESR spectroscopy. Also, a new method was designed to label ascorbic acid with a fluorescent marker. Moreover, some important criteria were considered for the evaluation and quantification of ascorbyl radicals in human blood plasma using two types of ESR spectrometers.
It is considered an analytical model of defaultable bond portfolio in terms of its face value process. The face value process dynamically evolves with time and incorporates changes caused by recovery payment on default followed by purchasing of new bonds. The further studies involve properties, distribution and control of the face value process.
In many industrial applications fast and accurate solutions of linear elliptic partial differential equations are needed as one of the building blocks of more complex problems. The domains are often highly complex and meshing turns out to be expensive and difficult to obtain with a sufficient quality. In such cases methods with a regular, not boundary adapted grid offer an attractive alternative. The Explicit Jump Immersed Interface Method is one of these algorithms. The main interest of this work lies in solving the linear elasticity equations. For this purpose the existing EJIIM algorithm has been extended to three dimensions. The Poisson equation is always considered in parallel as the most typical representative of elliptic PDEs. During the work it became clear that EJIIM can have very high computational memory requirements. To overcome this problem an improvement, Reduced EJIIM is proposed. The main theoretical result in this work is the proof of the smoothing property of inverses of elliptic finite difference operators in two and three space dimensions. It is an often observed phenomena that the local truncation error is allowed to be of lower order along some lower dimensional manifold without influencing the global convergence order of the solution.
An autoregressive-ARCH model with possible exogeneous variables is treated. We estimate the conditional volatility of the model by applying feedforward networks to the residuals and prove consistency and asymptotic normality for the estimates under the rate of feedforward networks complexity. Recurrent neural networks estimates of GARCH and value-at-risk is studied. We prove consistency and asymptotic normality for the recurrent neural networks ARMA estimator under the rate of recurrent networks complexity. We also overcome the estimation problem in stochastic variance models in discrete time by feedforward networks and the introduction of a new distributions on the innovations. We use the method to calculate market risk such as expected shortfall and Value-at risk. We tested this distribution together with other new distributions on the GARCH family models against other common distributions on the financial market such as Normal Inverse Gaussian, normal and the Student's t- distributions. As an application of the models, some German stocks are studied and the different approaches are compared together with the most common method of GARCH(1,1) fit.
Seit Beginn der 90er Jahre werden vermehrt Kreisverkehre gebaut. Insbesondere beim Umbau vorhandener LSA-Kreuzungen zu Kreisverkehren werden Vorteile für den Individualverkehr gesehen. Diese Vorteile werden allerdings mit Nachteilen für den öffentlichen Personennahverkehr erkauft. Die erstmals untersuchten Auswirkungen dieser Knotenpunktform auf Fahrzeuge des öffentlichen Personennahverkehr (ÖPNV) sind teilweise erheblich: - Wartezeiten für ÖV-Fahrzeuge an Kreisverkehren schwanken und sind schlecht in den Fahrplan zu integrieren, - Fahrtrichtungswechsel bei der Befahrung der Kreisfahrbahn reduzieren den Fahrkomfort, - ÖPNV-Beschleunigungen werden an Kreisver-kehren selten angewandt, - ÖPNV-Priorisierungmöglichkeiten durch Eingriffe in Lichtsignalanlagensteuerungen entfallen. Dass Beschleunigungen auf dem Linienweg in vielen Fällen möglich sind, wurde sowohl durch empirische Auswertungen bestehender Kreisverkehre als auch durch Simulationen gezeigt. Bei geringen Verkehrsstärken sind Beschleunigungen im Allgemeinen nicht notwendig. Zudem steht die Wirkung häufig in ungünstiger Relation zum erforderlichen Aufwand. Bei hohen Verkehrsstärken in den Zufahrten ermöglicht dagegen z.B. die ÖV-Spur hervorragende Beschleunigungen für den ÖV. Allerdings wurden bei zweistreifiger, pa-ralleler Führung von MIV- und ÖV-Strömen zu einstreifigen Kreisverkehren häufig Irritationen zwischen MIV- und ÖV-Fahrzeugen beobachtet. Kei-ne Irritationen wurden beobachtet, wenn MIV- und ÖV- Spur in der Zufahrt zum Kreisverkehr zweistreifig parallel geführt werden und die MIV-Fahrspur unmittelbar vor dem Kreisverkehr in einer Fahrstreifenreduktion endet und die ebenfalls endende ÖV-Spur als normaler Fahrstreifen fortgeführt wird. Bei dieser als „KREIFAS“ (KReisverkehr mit EIngezogenem FAhrstreifen) bezeichneten Verkehrsführung wechseln die MIV-Fahrzeuge den Fahrstreifen, während der ÖV geradeaus weiterfahren kann. Eine Beschleunigungsmöglichkeit bei der Einfahrt in die Kreisfahrbahn bietet die „schlafende LSA“. Der Vorrang der Fahrzeuge auf der Kreisfahrbahn wird durch eine schlafende Lichtsignalanlage (Dunkelampel) aufgehoben, wenn ÖV-Fahrzeuge in der Zufahrt auf den Kreisverkehr zufahren. Fahrzeuge aus dieser Zufahrt erhalten solange Vorrang, bis dass das ÖV-Fahrzeug die Kreisfahrbahn erreicht hat. Durch diese und andere Maßnahmen wird eine Reduzierung von Wartezeiten für Busse bei der Einfahrt in die Kreisfahrbahn erreicht, ebenso wie eine Verstetigung des Fahrtverlaufes in der Zufahrt und somit eine Steigerung von Fahrplantreue und Fahrkomfort erreicht. Insgesamt ist eine ausgewogene Berücksichtigung aller Verkehrsteilnehmer auch bei Planungen an Kreisverkehren erforderlich. Wenn ÖV-Linien beschleunigt über Kreisverkehre geführt werden sollen, sind deren Anforderungen besonders sorgfältig zu berücksichtigen. Somit ergeben sich auch für das Element Kreisverkehr Beschleunigungsmöglichkeiten, um den Wegfall von LSA-Beschleunigungsmaßnahmen in weiten Teilen zu kompensieren.
In the thesis the task of channel estimation in beyond 3G service area based mobile radio air interfaces is considered. A system concept named Joint Transmission and Detection Integrated Network (JOINT) forms the target platform for the investigations. A single service area of JOINT is considered, in which a number of mobile terminals is supported by a number of radio access points, which are connected to a central unit responsible for the signal processing. The modulation scheme of JOINT is OFDM. Pilot-aided channel estimation is considered, which has to be performed only in the uplink of JOINT, because the duplexing scheme TDD is applied. In this way, the complexity of the mobile terminals is reduced, because they do not need a channel estimator. Based on the signals received by the access points, the central unit estimates the channel transfer functions jointly for all mobile terminals. This is done by resorting to the a priori knowledge of the radiated pilot signals and by applying the technique of joint channel estimation, which is developed in the thesis. The quality of the gained estimates is judged by the degradation of their signal-to-noise ratio as compared to the signal-to-noise ratio of the respective estimates gained in the case of a single mobile terminal radiating its pilots. In the case of single-element receive antennas at the access points, said degradation depends solely on the structure of the applied pilots. In the thesis it is shown how by a proper design of the pilots the SNR degradation can be minimized. Besides using appropriate pilots, the performance of joint channel estimation can be further improved by the inclusion of additional a-priori information in the estimation process. An example of such additional information would be the knowledge of the directional properties of the radio channels. This knowledge can be gained if multi-element antennas are applied at the access points. Further, a-priori channel state information in the form of the power delay profiles of the radio channels can be included in the estimation process by the application of the minimum mean square error estimation principle for joint channel estimation. After having intensively studied the problem of joint channel estimation in JOINT, the thesis rounds itself by considering the impact of the unavoidable channel estimation errors on the performance of data estimation in JOINT. For the case of small channel estimation errors occurring due to the presence of noise at the access points, the performance of joint detection in the uplink and of joint transmission in the downlink of JOINT are investigated based on simulations. For the uplink, which utilizes joint detection, it is shown to which degree the bit error probability increases due to channel estimation errors. For the downlink, which utilizes joint transmission, channel estimation errors lead to an increase of the required transmit power, which can be quantified by the simulation results.
The thesis is focused on modelling and simulation of a Joint Transmission and Detection Integrated Network (JOINT), a novel air interface concept for B3G mobile radio systems. Besides the utilization of the OFDM transmission technique, which is a promising candidate for future mobile radio systems, and of the duplexing scheme time division duplexing (TDD), the subdivision of the geographical domain to be supported by mobile radio communications into service areas (SAs) is a highlighted concept of JOINT. A SA consists of neighboring sub-areas, which correspond to the cells of conventional cellular systems. The signals in a SA are jointly processed in a Central Unit (CU) in each SA. The CU performs joint channel estimation (JCE) and joint detection (JD) in the form of the receive-zero-forcing (RxZF) Filter for the uplink (UL) transmission and joint transmission (JT) in the form of the transmit-zero-forcing (TxZF) Filter for the downlink (DL) transmission. By these algorithms intra-SA multiple access interference (MAI) can be eliminated within the limits of the used model so that unbiased data estimates are obtained, and most of the computational effort is moved from mobile terminals (MTs) to the CU so that the MTs can do with low complexity. A simulation chain of JOINT has been established in the software MLDesigner by the author based on time discrete equivalent lowpass modelling. In this simulation chain, all key functionalities of JOINT are implemented. The simulation chain is designed for link level investigations. A number of channel models are implemented both for the single-SA scenario and the multiple-SA scenario so that the system performance of JOINT can be comprehensively studied. It is shown that in JOINT a duality or a symmetry of the MAI elimination in the UL and in the DL exists. Therefore, the typical noise enhancement going along with the MAI elimination by JD and JT, respectively, is the same in both links. In the simulations also the impact of channel estimation errors on the system performance is studied. In the multiple-SA scenario, due to the existence of the inter-SA MAI, which cannot be suppressed by the algorithms of JD and JT, the system performance in terms of the average bit error rate (BER) and the BER statistics degrades. A collection of simulation results show the potential of JOINT with respect to the improvement of the system performance and the enhancement of the spectrum e±ciency as compared to conventional cellular systems.
In conventional radio communication systems, the system design generally starts from the transmitter (Tx), i.e. the signal processing algorithm in the transmitter is a priori selected, and then the signal processing algorithm in the receiver is a posteriori determined to obtain the corresponding data estimate. Therefore, in these conventional communication systems, the transmitter can be considered the master and the receiver can be considered the slave. Consequently, such systems can be termed transmitter (Tx) oriented. In the case of Tx orientation, the a priori selected transmitter algorithm can be chosen with a view to arrive at particularly simple transmitter implementations. This advantage has to be countervailed by a higher implementation complexity of the a posteriori determined receiver algorithm. Opposed to the conventional scheme of Tx orientation, the design of communication systems can alternatively start from the receiver (Rx). Then, the signal processing algorithm in the receiver is a priori determined, and the transmitter algorithm results a posteriori. Such an unconventional approach to system design can be termed receiver (Rx) oriented. In the case of Rx orientation, the receiver algorithm can be a priori selected in such a way that the receiver complexity is minimum, and the a posteriori determined transmitter has to tolerate more implementation complexity. In practical communication systems the implementation complexity corresponds to the weight, volume, cost etc of the equipment. Therefore, the complexity is an important aspect which should be taken into account, when building practical communication systems. In mobile radio communication systems, the complexity of the mobile terminals (MTs) should be as low as possible, whereas more complicated implementations can be tolerated in the base station (BS). Having in mind the above mentioned complexity features of the rationales Tx orientation and Rx orientation, this means that in the uplink (UL), i.e. in the radio link from the MT to the BS, the quasi natural choice would be Tx orientation, which leads to low cost transmitters at the MTs, whereas in the downlink (DL), i.e. in the radio link from the BS to the MTs, the rationale Rx orientation would be the favorite alternative, because this results in simple receivers at the MTs. Mobile radio downlinks with the rationale Rx orientation are considered in the thesis. Modern mobile radio communication systems are cellular systems, in which both the intracell and intercell interferences exist. These interferences are the limiting factors for the performance of mobile radio systems. The intracell interference can be eliminated or at least reduced by joint signal processing with consideration of all the signals in the considered cell. However such joint signal processing is not feasible for the elimination of intercell interference in practical systems. Knowing that the detrimental effect of intercell interference grows with its average energy, the transmit energy radiated from the transmitter should be as low as possible to keep the intercell interference low. Low transmit energy is required also with respect to the growing electro-phobia of the public. The transmit energy reduction for multi-user mobile radio downlinks by the rationale Rx orientation is dealt with in the thesis. Among the questions still open in this research area, two questions of major importance are considered here. MIMO is an important feature with respect to the transmit power reduction of mobile radio systems. Therefore, first questionconcerns the linear Rx oriented transmission schemes combined with MIMO antenna structures. The investigations of the MIMO benefit on the linear Rx oriented transmission schemes are studied in the thesis. Utilization of unconventional multiply connected quantization schemes at the receiver has also great potential to reduce the transmit energy. Therefore, the second question considers the designing of non-linear Rx oriented transmission schemes combined with multiply connected quantization schemes.
Competing Neural Networks as Models for Non Stationary Financial Time Series -Changepoint Analysis-
(2005)
The problem of structural changes (variations) play a central role in many scientific fields. One of the most current debates is about climatic changes. Further, politicians, environmentalists, scientists, etc. are involved in this debate and almost everyone is concerned with the consequences of climatic changes. However, in this thesis we will not move into the latter direction, i.e. the study of climatic changes. Instead, we consider models for analyzing changes in the dynamics of observed time series assuming these changes are driven by a non-observable stochastic process. To this end, we consider a first order stationary Markov Chain as hidden process and define the Generalized Mixture of AR-ARCH model(GMAR-ARCH) which is an extension of the classical ARCH model to suit to model with dynamical changes. For this model we provide sufficient conditions that ensure its geometric ergodic property. Further, we define a conditional likelihood given the hidden process and a pseudo conditional likelihood in turn. For the pseudo conditional likelihood we assume that at each time instant the autoregressive and volatility functions can be suitably approximated by given Feedfoward Networks. Under this setting the consistency of the parameter estimates is derived and versions of the well-known Expectation Maximization algorithm and Viterbi Algorithm are designed to solve the problem numerically. Moreover, considering the volatility functions to be constants, we establish the consistency of the autoregressive functions estimates given some parametric classes of functions in general and some classes of single layer Feedfoward Networks in particular. Beside this hidden Markov Driven model, we define as alternative a Weighted Least Squares for estimating the time of change and the autoregressive functions. For the latter formulation, we consider a mixture of independent nonlinear autoregressive processes and assume once more that the autoregressive functions can be approximated by given single layer Feedfoward Networks. We derive the consistency and asymptotic normality of the parameter estimates. Further, we prove the convergence of Backpropagation for this setting under some regularity assumptions. Last but not least, we consider a Mixture of Nonlinear autoregressive processes with only one abrupt unknown changepoint and design a statistical test that can validate such changes.
This thesis investigates the constrained form of the spherical Minimax location problem and the spherical Weber location problem. Specifically, we consider the problem of locating a new facility on the surface of the unit sphere in the presence of convex spherical polygonal restricted regions and forbidden regions such that the maximum weighted distance from the new facility on the surface of the unit sphere to m existing facilities is minimized and the sum of the weighted distance from the new facility on the surface of the unit sphere to m existing facilities is minimized. It is assumed that a forbidden region is an area on the surface of the unit sphere where travel and facility location are not permitted and that distance is measured using the great circle arc distance. We represent a polynomial time algorithm for the spherical Minimax location problem for the special case where all the existing facilities are located on the surface of a hemisphere. Further, we have developed algorithms for spherical Weber location problem using barrier distance on a hemisphere as well as on the unit sphere.
Die vorliegende Arbeit soll einen Beitrag dazu leisten, die Verwendung der Entlastungspartie als mediumgeschmiertes Radiallager zu untersuchen. Die damit entfallende Abdichtung zur Umgebung und eine insgesamt kürzere Pumpenwelle würde das rotordynamische Verhalten von mehrstufigen Gliederpumpen erheblich verbessern. Deshalb wird das Schwingungsverhalten einer mehrstufigen Gliederpumpe untersucht, indem verschiedene Standard-Profilierungen des zentralen Entlastungskolbens miteinander verglichen werden. Davon ausgehend wird eine Entlastung mit Injektion realisiert, die die Funktion eines Hybridlagers übernimmt, damit die Lagereigenschaften optimiert und der Einfluss des langen Drosselspaltes auf die Rotordynamik dargestellt werden kann. Als Hybridlager wird der Einfachkolben als zentrale Entlastung ausgewählt. Analog zu Gleitlagern wird eine glatte Spaltoberfläche realisiert, wenn in diesen Spalt mit dem Pumpenenddruck injiziert wird. In Verbindung mit der Exzentrizität des Rotors wird somit eine maximale Tragfähigkeit angestrebt. Die axiale Restkraft wird mit einem Kardanischen Ring gemessen. Bevor nun der Kolben der Entlastung ausgelegt werden kann, muss der hydraulische Axialschub bekannt sein. Im Rahmen dieser Arbeit wurde am Lehrstuhl ein Auslegungsprogramm für Kreiselpumpen entwickelt, mit dem der Druckverlauf im Radseitenraum, die Druckabsenkung, die Winkelgeschwindigkeit des Fluids und der hydraulische Axialschub berechnet wird. Um die Berechnungsmodelle zu verifizieren wird im experimentellen Teil dieser Arbeit, der Radseitenraum der letzten Stufe mit Miniatur-Drucksensoren und einem Wegsensor appliziert. Die Lagerbelastung und der Betriebspunkt wird mit einem Kardanischen Ring gemessen, der mit Dehnungs-Mess-Streifen appliziert ist und den axialen Restschub erfasst. Außerdem werden die dynamischen Signale der Drucksensoren und des Kardanischen Rings genutzt, um die Veränderungen des Schwingungszustandes oder die Übertragungsfunktion des Radseitenraumes bzw. des langen Spaltes der Entlastungseinrichtung zu beschreiben. Abschließend werden die Auswirkungen der Injektion auf die Entlastungspartie untersucht. Als Ergebnis dieser Arbeit konnte festgestellt werden, dass die Injektion den Durchflusswiderstand zwischen der Injektionsstelle und dem Radseitenraum erhöht. Zudem "bremst" die Injektion die Umfangskomponente der Absolutströmung, so dass der Rotationsfaktor Richtung Teillast kleiner wird. Dadurch kann mit Hilfe der Injektion die Entlastungskraft gesteuert werden. In den Frequenzspektren der glatten Spalt-Konfigurationen (MR3+MR4) tritt am deutlichsten die Frequenz der Laufradschaufeln in Erscheinung, deren Amplitude mit abnehmendem Radius im Radseitenraum deutlich gedämpft wird. Richtung Teillast übersteigt diese sogar die Unwuchtfrequenz und dominiert damit das Frequenzspektrum. Der Radseitenraum wird also von den hydraulischen Laufrad-Leitrad-Interaktionen dominiert. Ab Förderstromverhältnissen von q<0,5 ist ein breitbandiger Anstieg von subsynchronen Frequenzanteilen auszumachen. Diese sind durch Rezirkulationserscheinungen am Laufradaustritt (Austauschwirbel) begründet. Für die Konfiguration ohne Injektion "schlagen" die Frequenzen, die von Lauf- und Leitrad-Interaktionen generiert werden, bis hinter den Entlastungskolben durch. Dies wird durch die doppelten Spaltspiele begünstigt, die eine erhöhte Sensibilität des Rotors gegenüber Anregungen bewirken. Wird in die zentrale Entlastungseinrichtung injiziert, kann das Schwingungsverhalten der Pumpe deutlich verbessert werden. Bemerkenswert ist auch, dass die rotordynamisch vermeintlich beste Konfiguration (MR2) durch eine "ungünstigere" (MR3+MR4) in Kombination mit der Injektion unterboten wird. Die Injektion reduziert die Koppelsteifigkeit (vgl. Drallbremse), was den Rotor (FT) stabilisiert.
The present thesis deals with a novel approach to increase the resource usage in digital communications. In digital communication systems, each information bearing data symbol is associated to a waveform which is transmitted over a physical medium. The time or frequency separations among the waveforms associated to the information data have always been chosen to avoid or limit the interference among them. By doing so, n the presence of a distortionless ideal channel, a single receive waveform is affected as little as possible by the presence of the other waveforms. The conditions necessary to meet the absence of any interference among the waveforms are well known and consist of a relationship between the minimum time separation among the waveforms and their bandwidth occupation or, equivalently, the minimum frequency separation and their time occupation. These conditions are referred to as Nyquist assumptions. The key idea of this work is to relax the Nyquist assumptions and to transmit with a time and/or frequency separation between the waveforms smaller than the minimum required to avoid interference. The reduction of the time and/or frequency separation generates not only an increment of the resource usage, but also a degradation in the quality of the received data. Therefore, to maintain a certain quality in the received signal, we have to increase the amount of transmitted power. We investigate the trade-off between the increment of the resource usage and the correspondent performance degradation in three different cases. The first case is the single carrier case in which all waveforms have the same spectrum, but have different temporal locations. The second one is the multi carrier case in which each waveform has its distinct spectrum and occupies all the available time. Finally, the hybrid case when each waveform has its unique time and frequency location. These different cases are framed within the general system modelling developed in the thesis so that they can be easily compared. We evaluate the potential of the key idea of the thesis by choosing a set of four possible waveforms with different characteristics. By doing so, we study the influence of the waveform characteristics in the three system configurations. We propose an interpretation of the results by modifying the well-known Shannon capacity formula and by explicitly expressing its dependency on the increment of resource usage and on the performance degradation. The results are very promising. We show that both in the case of a single carrier system with a time limited waveform and in the case of a multi-carrier system with a frequency limited waveform, the reduction of the time or frequency separation, respectively, has a positive effect on the channel capacity. The latter, depending on the actual SNR, can double or increase even more significantly.
Fragmentation of tropical rain forests is pervasive and results in various modifications in the ecosystem functioning such as … It has long been noticed that the colony densities of a dominant herbivore in the neotropics - leaf-cutting ant (LCA) - increase in fragmentation-related habitats like forest edges and small fragments, however the reasons for this increase are not clear. The aim of the study was to test the hypothesis that bottom-up control of LCA populations is less effective in fragmented compared to continuous forests and thus explains the increase in LCA colony densities in these habitats. In order to test for less effective bottom-up control, I proposed four working hypotheses. I hypothesized that LCA colonies in fragmented habitats (1) find more palatable vegetation due to low plant defences, (2) forage on few dominant species resulting in a narrow diet breadth, (3) possess small foraging areas and (4) increase herbivory rate at the colony level. The study was conducted in the remnants of the Atlantic rainforest in NE Brazil. Two fragmentation-related forest habitats were included: the edge and a 3500-ha continuous forest and the interior of the 50-ha forest fragment. The interior of the continuous forest served as a control habitat for the study. All working hypotheses can be generally accepted. The results indicate that the abundance of LCA host plant species in the habitats created by forest fragmentation along with weaker chemical defense of those species (especially the lack of terpenoids) allow ants to forage predominantly on palatable species and thus reduce foraging costs on other species. This is supported by narrower ant diet breadth in these habitats. Similarly, small foraging areas in edge habitats and in small forest fragments indicate that there ants do not have to go far to find the suitable host species and thus they save foraging costs. Increased LCA herbivory rates indicate that the damages (i.e., amount of harvested foliage) caused by LCA are more important in fragmentation-related habitats which are more vulnerable to LCA herbivory due to the high availability of palatable plants and a low total amount of foliage (LAI). (1) Few plant defences, (2) narrower ant diet breadth, (3) reduced colony foraging areas, and (4) increased herbivory rates, clearly indicate a weaker bottom-up control for LCA in fragmented habitats. Weak bottom-up control in the fragmentation-related habitats decreases the foraging costs of a LCA colony in these habitats and the colonies might use the surplus of energy resulting from reduced foraging costs to increase the colony growth, the reproduction and turnover. If correct, this explains why fragmented habitats support more LCA colonies at a given time compared to continuous forest habitats. Further studies are urgently needed to estimate LCA colony growth and turnover rates. There are indices that edge effects of forest fragmentation might be more responsible in regulating LCA populations than area or isolation effects. This emphasizes the need to conserve big forest fragments not to fall below a critical size and retain their regular shape. Weak bottom-up control of LCA populations has various consequences on forested ecosystems. I suggest a loop between forest fragmentation and LCA population dynamics: the increased LCA colony densities, along with lower bottom-up control increase LCA herbivory pressure on the forest and thus inevitably amplify the deleterious effects of fragmentation. These effects include direct consequences of leaf removal by ants and various indirect effects on ecosystem functioning. This study contributes to our understanding of how primary fragmentation effects, via the alteration of trophic interactions, may translate into higher order effects on ecosystem functions.
Die vorliegende Arbeit wurde angeregt durch die in A.N. Borodin(2000) [Version of the Feynman-Kac Formula. Journal of Mathematical Sciences, 99(2):1044-1052, 2000] und in B. Simon(2000) [A Feynman-Kac Formula for Unbounded Semigroups. Canadian Math. Soc. Conf. Proc., 28:317-321, 2000] dargestellten Feynman-Kac-Formeln. Sie beschäftigt sich mit dem Problem, den Geltungsbereich der Feynman-Kac-Formel im Hinblick auf die Bedingungen der Potentiale und der Anfangsbedingung der zugehörigen partiellen Differentialgleichung zu erweitern. Es ist bekannt, dass die Feynman-Kac-Formel für beschränkte Potentiale gilt. Ausserdem gilt sie auch für Anfangsbedingungen, die im Raum \(C_{0}(\mathbb{R}^{n})\) oder im Raum \(C_{c}^{2}(\mathbb{R}^{n})\) liegen. Die Darstellung der Feynman-Kac-Formel für die Anfangsbedingung, die im Raum \(C_{c}^{2}(\mathbb{R}^{n})\) liegt, liefert die Lösung der partiellen Differentialgleichung. Wir können sie auch als stark stetige Halbgruppe auf dem Raum \(C_{0}(\mathbb{R}^{n})\) auffassen. Diese zwei verschiedenen Darstellungen sind äquivalent. In dieser Arbeit zeigen wir zunächst, dass die Feynman-Kac-Formel auch für unbeschränkte Potentiale \(V\) gilt, wobei \(|V(x)| \leq \varepsilon ||x||^{2} + C_{\varepsilon} \) für alle \(\varepsilon > 0; C_{\varepsilon} > 0\) und \(x \in \mathbb{R}^{n}\) ist. Ausserdem zeigen wir, dass sie für alle Anfangsbedingungen \(f\) gilt mit \(x \mapsto e^{-\varepsilon |x|^{2}} f(x) \in H^{2,2}(\mathbb{R}^{n})\). Der Beweis ist wahrscheinlichkeitstheoretisch und benutzt keine Spektraltheorie. Der spektraltheoretische Zugang, in dem eine Darstellung des Operators \(e^{-tH}\), wobei \(H = -\frac{1}{2} \Delta + V\) gegeben wird, wurde von B. Simon(2000) auch auf die obige Klasse von Potentialen ausgeweitet. Wir lassen zusätzlich auch Potentiale der Form \(V = V_{1} + V_{2}\) zu, wobei \(V_{1} \in L^{2}(\mathbb{R}^{3})\) ist und für alle \(\varepsilon > 0\) gibt es \(C_{\varepsilon} > 0\), so dass \(|V_{2}(x)| \leq\varepsilon ||x||^{2} + C_{\varepsilon}\) für alle \(x \in \mathbb{R}^{3}\) ist. Im Gegensatz zur klassischen Situation ist \(e^{-tH}\) jetzt ein unbeschränkter Operator. Schließlich wird in dieser Arbeit auch der Zusammenhang zwischen der Feynman-Kac-It\(\hat{o}\)-Formel, der Feynman-Kac-Formel und der Kolmogorov-Rückwärtsgleichung untersucht.