Refine
Year of publication
- 2004 (55) (remove)
Document Type
- Doctoral Thesis (55) (remove)
Has Fulltext
- yes (55)
Keywords
- Flüssig-Flüssig-Extraktion (3)
- Simulation (3)
- Harnstoff (2)
- Hydrodynamik (2)
- Polymere (2)
- SOC (2)
- auditory brainstem (2)
- 2-D-Elektrophorese (1)
- ADAM10 (1)
- Abgasnachbehandlung (1)
Faculty / Organisational entity
- Kaiserslautern - Fachbereich Maschinenbau und Verfahrenstechnik (18)
- Kaiserslautern - Fachbereich Biologie (10)
- Kaiserslautern - Fachbereich Chemie (10)
- Kaiserslautern - Fachbereich Mathematik (7)
- Kaiserslautern - Fachbereich ARUBI (4)
- Kaiserslautern - Fachbereich Informatik (3)
- Kaiserslautern - Fachbereich Elektrotechnik und Informationstechnik (2)
- Kaiserslautern - Fachbereich Physik (1)
In the filling process of a car tank, the formation of foam plays an unwanted role, as it may prevent the tank from being completely filled or at least delay the filling. Therefore it is of interest to optimize the geometry of the tank using numerical simulation in such a way that the influence of the foam is minimized. In this dissertation, we analyze the behaviour of the foam mathematically on the mezoscopic scale, that is for single lamellae. The most important goals are on the one hand to gain a deeper understanding of the interaction of the relevant physical effects, on the other hand to obtain a model for the simulation of the decay of a lamella which can be integrated in a global foam model. In the first part of this work, we give a short introduction into the physical properties of foam and find that the Marangoni effect is the main cause for its stability. We then develop a mathematical model for the simulation of the dynamical behaviour of a lamella based on an asymptotic analysis using the special geometry of the lamella. The result is a system of nonlinear partial differential equations (PDE) of third order in two spatial and one time dimension. In the second part, we analyze this system mathematically and prove an existence and uniqueness result for a simplified case. For some special parameter domains the system can be further simplified, and in some cases explicit solutions can be derived. In the last part of the dissertation, we solve the system using a finite element approach and discuss the results in detail.
Nowadays one of the major objectives in geosciences is the determination of the gravitational field of our planet, the Earth. A precise knowledge of this quantity is not just interesting on its own but it is indeed a key point for a vast number of applications. The important question is how to obtain a good model for the gravitational field on a global scale. The only applicable solution - both in costs and data coverage - is the usage of satellite data. We concentrate on highly precise measurements which will be obtained by GOCE (Gravity Field and Steady State Ocean Circulation Explorer, launch expected 2006). This satellite has a gradiometer onboard which returns the second derivatives of the gravitational potential. Mathematically seen we have to deal with several obstacles. The first one is that the noise in the different components of these second derivatives differs over several orders of magnitude, i.e. a straightforward solution of this outer boundary value problem will not work properly. Furthermore we are not interested in the data at satellite height but we want to know the field at the Earth's surface, thus we need a regularization (downward-continuation) of the data. These two problems are tackled in the thesis and are now described briefly. Split Operators: We have to solve an outer boundary value problem at the height of the satellite track. Classically one can handle first order side conditions which are not tangential to the surface and second derivatives pointing in the radial direction employing integral and pseudo differential equation methods. We present a different approach: We classify all first and purely second order operators which fulfill that a harmonic function stays harmonic under their application. This task is done by using modern algebraic methods for solving systems of partial differential equations symbolically. Now we can look at the problem with oblique side conditions as if we had ordinary i.e. non-derived side conditions. The only additional work which has to be done is an inversion of the differential operator, i.e. integration. In particular we are capable to deal with derivatives which are tangential to the boundary. Auto-Regularization: The second obstacle is finding a proper regularization procedure. This is complicated by the fact that we are facing stochastic rather than deterministic noise. The main question is how to find an optimal regularization parameter which is impossible without any additional knowledge. However we could show that with a very limited number of additional information, which are obtainable also in practice, we can regularize in an asymptotically optimal way. In particular we showed that the knowledge of two input data sets allows an order optimal regularization procedure even under the hard conditions of Gaussian white noise and an exponentially ill-posed problem. A last but rather simple task is combining data from different derivatives which can be done by a weighted least squares approach using the information we obtained out of the regularization procedure. A practical application to the downward-continuation problem for simulated gravitational data is shown.
Mit Hilfe von Trifluormethansulfonsäure gelang die chemische Deglykosylierung von natürlichem Gelonin. Durch die Charakterisierung mit Hilfe von SDS-PAGE, wurden Hinweise auf das Vorliegen der Aminosäurensequenz von Nolan et al. gefunden. Durch Auswertung massenspektrometrischer Daten wurde ein mögliches Glykosylierungsmuster vorgeschlagen. Die Expression von rekombinantem Gelonin in E.coli und anschließende Isolierung mit Hilfe der Nickel-Affinitätschromatographie führte zu einem Produkt, das trotz fehlender Glykosylierung um den Faktor 2 toxischer war als natürliches Gelonin und vergleichbare immunologische Eigenschaften aufwies. Durch molekularbiologische Arbeiten wurde der Expressionsvektor für ein AChR-Fragment (a-Untereinheit, AS 4-181) um die DNA-Information für die Aminosäuren 182-208 erweitert. Eine Expression führte zur Bildung eines nativen Produktes, während die native Isolierung des verkürzten Fragmentes nicht erfolgreich war. Ein rekombinant hergestelltes Fusionsprotein aus Gelonin und einem AChR-Fragment (a-Untereinheit, AS 4-181) konnte in hoher Ausbeute und Reinheit mit Hilfe von Nickel-Affinitätschromatographie isoliert werden. Da eine denaturierende Aufarbeitung notwendig war, wurde eine geeignete Renaturierungsmethode entwickelt. Trotz Optimierung fielen allerdings noch bis zu 80% des Fusionsproteins als falsch-gefaltete, unlösliche Proteinaggregate aus. Durch Einführung einer „Recyclingmethode“ konnte der Proteinverlust deutlich minimiert werden. Beide Domänen zeigten sich nativ gefaltet. Allerdings war das Gelonin-Fragment um den Faktor 11 untoxischer als rekombinantes Gelonin alleine. Das Fusionsprotein wurde in einem Tiermodell der Myasthenia gravis auf seine potentiellen antigenspezifischen immunsuppressiven Eigenschaften gestestet. Nach der Induktion der Erkrankung in Ratten durch Gabe von komplettem AChR, wurde die Erkrankung durch repetitive Nervenstimulation untersucht. Eine Methode die auch bei humaner Myasthenie angewendet wird. Nach der Gabe des Fusionsproteins verschwanden die myasthenen Symptome in der Ratte innerhalb einer Woche. Damit zeigte das Fusionsprotein einen therapeutischen Effekt. Langzeitstudien wurden allerdings nicht durchgeführt.
Die formale Spezifikation von Kommunikationssystemen stellt durch die mit ihr verbundene Abstraktion und Präzision eine wichtige Grundlage für die formale Verifikation von Systemeigenschaften dar. Diese Abstraktion begrenzt jedoch auch die Ausdrucksfähigkeit der formalen Beschreibungstechnik und kann somit zu problemunangemessenen Spezifikationen führen. Wir untersuchen anhand der formalen Beschreibungstechnik Estelle zunächst zwei solche Aspekte. Beide führen speziell in Hinsicht auf die Domäne von Estelle, der Spezifikation von Kommunikationsprotokollen, zu schwerwiegenden Beeinträchtigungen der Ausdrucksfähigkeit. Eines dieser Defizite zeigt sich bei dem Versuch, in Estelle ein offenes System wie z. B. eine Protokollmaschine oder einen Kommunikationsdienst zu spezifizieren. Da Estelle-Spezifikationen nur geschlossene Systeme beschreiben können, werden solche Komponenten immer nur als Teil einer fest vorgegebenen Umgebung spezifiziert und besitzen auch nur in dieser eine formale Syntax und Semantik. Als Lösung für dieses Problem führen wir die kompatible syntaktische und semantische Estelle-Erweiterung Open-Estelle ein, die eine formale Spezifikation solcher offener Systeme und ihres Imports in verschiedene Umgebungen ermöglicht. Ein anderes Defizit in der Ausdrucksfähigkeit von Estelle ergibt sich aus der strengen Typprüfung. Wir werden zeigen, dass es in heterogenen, hierarchisch strukturierten Kommunikationssystemen im Zusammenhang mit den dort auftretenden horizontalen und vertikalen Typkompositionen zu einer unangemessenen Modellierung von Nutzdatentypen an den Dienstschnittstellen kommt. Dieses Problem erweist sich beim Versuch einer generischen und nutzdatentypunabhängigen Spezifikation eines offenen Systems (z. B. mit Open-Estelle) sogar als fatal. Deshalb führen wir die kompatible Containertyp-Erweiterung ein, durch die eine formale Spezifikation nutzdatentypunabhängiger und somit generischer Schnittstellen von Diensten und Protokollmaschinen ermöglicht wird. Als Grundlage für unsere Implementierungs- und Optimierungsexperimente führen wir den „eXperimental Estelle Compiler“ (XEC) ein. Er ermöglicht aufgrund seines Implementierungskonzeptes eine sehr flexible Modellierung des Systemmanagements und ist insbesondere für die Realisierung verschiedener Auswahloptimierungen geeignet. XEC ist zudem mit verschiedenen Statistik- und Monitoring-Funktionalitäten ausgestattet, durch die eine effiziente quantitative Analyse der durchgeführten Implementierungsexperimente möglich ist. Neben dem vollständigen Sprachumfang von Estelle unterstützt XEC auch die meisten der hier eingeführten Estelle-Erweiterungen. Neben der Korrektheit ist die Effizienz automatisch generierter Implementierungen eine wichtige Anforderung im praktischen Einsatz. Hier zeigt sich jedoch, dass viele der in formalen Protokollspezifikationen verwendeten Konstrukte nur schwer semantikkonform und zugleich effizient implementiert werden können. Entsprechend untersuchen wir anhand des Kontrollflusses und der Handhabung von Nutzdaten, wie die spezifizierten Operationen effizient implementiert werden können, ohne das Abstraktionsniveau senken zu müssen. Die Optimierung des Kontrollflusses geschieht dabei ausgehend von der effizienten Realisierung der Basisoperationen der von XEC erzeugten Implementierungen primär anhand der Transitionsauswahl, da diese speziell bei komplexen Spezifikationen einen erheblichen Teil der Ausführungszeit bansprucht. Wir entwickeln dazu verschiedene heuristische Optimierungen der globalen Auswahl und der modullokalen Auswahl und werten diese sowohl analytisch wie auch experimentell aus. Wesentliche Ansatzpunkte sind dabei verschiedene ereignisgesteuerte Auswahlverfahren auf globaler Ebene und die Reduktion der zu untersuchenden Transitionen auf lokaler Ebene. Die Überprüfung der Ergebnisse anhand der ausführungszeitbezogenen Leistungsbewertung bestätigt diese Ergebnisse. Hinsichtlich der effizienten Handhabung von Daten untersuchen wir unterschiedliche Ansätze auf verschiedenen Ebenen, die jedoch in den meisten Fällen eine problemunangemessene Ausrichtung der Spezifikation auf die effiziente Datenübertragung erfordern. Eine überraschend elegante, problemorientierte und effiziente Lösung ergibt sich jedoch auf Basis der Containertyp-Erweiterung, die ursprünglich zur Steigerung des Abstraktionsniveaus eingeführt wurde. Dieses Ergebnis widerlegt die Vorstellung, dass Maßnahmen zur Steigerung der effizienten Implementierbarkeit auch immer durch eine Senkung des Abstraktionsniveaus erkauft werden müssen.
In this thesis we propose an efficient method to compute the automorphism group of an arbitrary hyperelliptic function field over a given constant field of odd characteristic as well as over its algebraic extensions. Beside theoretical applications, knowing the automorphism group also is useful in cryptography: The Jacobians of hyperelliptic curves have been suggested by Koblitz as groups for cryptographic purposes, because the discrete logarithm is believed to be hard in this kind of groups. In order to obtain "secure" Jacobians, it is necessary to prevent attacks like Pohlig/Hellman's and Duursma/Gaudry/Morain's. The latter is only feasible, if the corresponding function field has an automorphism of large order. According to a theorem by Madan, automorphisms seem to allow the Pohlig/Hellman attack, too. Hence, the function field of a secure Jacobian will most likely have trivial automorphism group. In other words: Computing the automorphism group of a hyperelliptic function field promises to be a quick test for insecure Jacobians. Let us outline our algorithm for computing the automorphism group Aut(F/k) of a hyperelliptic function field F/k. It is well known that Aut(F/k) is finite. For each possible subgroup U of Aut(F/k), Rolf Brandt has given a normal form for F if k is algebraically closed. Hence our problem reduces to deciding, whether a given hyperelliptic function field F=k(x,y), y^2=D_x has a defining equation of the form given by Brandt. This question can be answered using theorem III.18: We have F=k(t,u), u^2=D_t iff x is a fraction of linear polynomials in t and y=pu, where the factor p is a rational function w.r.t. t which can be determined explicitly from the coefficients of x. This condition can be checked efficiently using Gröbner basis techniques. With additional effort, it is also possible to compute Aut(F/k) if k is not algebraically closed. Investigating a huge number of examples one gets the impression that the above motivation of getting a quick test for insecure Jacobians is partially fulfilled: The computation of automorphism groups is quite fast using the suggested algorithm. Furthermore, fields with nontrivial automorphism groups seem to have insecure Jacobians. Only fields of small characteristic seem to have a reasonable chance of having nontrivial automorphisms. Hence, from a cryptographic point of view, computing Aut(F/k) seems to make sense whenever k has small characteristic.
Inappropriate speed is the most common reason for road traffic accidents world wide. Thus, a necessity for speed management exists. The so-called SUNflower states Sweden, the United Kingdom and the Netherlands - each spending strong effort in traffic safety policies - have great success in reducing mean road speeds and speed variances through speed management. However, the effect is still insufficient for gaining real traffic safety. Thus, there is a discussion to make use of technical in-vehicle devices. One of these technologies called Intelligent Speed Adaptation (ISA) reduces vehicle speeds. This is done either by warning the driver that he is speeding, or activating the accelerator pedal with a counterforce, or reducing the gasoline supply to the motor. The three ways of reducing the speed are called version 1-3. The EC-project for research on speed adaptation policies on European roads (PROSPER) deals with strategic proposals for the implementation of the different ISA-versions. This thesis includes selected results of PROSPER. In this thesis two empiric surveys were done in order to give an overview about the basic conditions (e.g. social, economic, technical aspects) for an ISA implementation in Germany. On one hand, a stakeholder analysis and questionnaire using the Delphi-method has been accomplished in two rounds. On the other hand, a questionnaire with speed offenders has been accomplished, too, in two rounds. In addition, the author created an expert pool consisting of 23 experts representing the most important fields of science and practice in which ISA is involved. The author made phone or personal interviews with most of the experts. 12 experts also produced a detailed publication on their professional point of view towards ISA. The two surveys and the professional comments on ISA led to four possible implementation scenarios for ISA in Germany. However, due to a strong political opposition against ISA it is also thinkable that ISA is not implemented or the implementation process starts after 2015 (i.e. outside the aimed period of time). The scenarios are as follows: A) Implementation of version 1 by market forces with governmental subventions. B) Implementation of version 2 by market forces supported by traffic safety institutions and image-making processes. C) Implementation of a modified version 3 by law for speed offenders instead of cancellation of the driving licence. D) Implementation of various versions in Germany because of a broad implementation of ISA in the SUNflower states. X) Non-implementation of ISA leads to the necessity of alternative speed management measures. The author prefers scenario B because - ceteris paribus - it seems to be the most likely way to implement the technology. As soon as ISA reaches technical maturity, the implementation process has to be accomplished in three steps. 1) Marketing and image making 2) Margin introduction 3) Market penetration This implementation process for ISA by market forces could effect a percentage of at least 15% of all vehicles equipped with ISA before the year 2015.
Im Mittelpunkt dieser Arbeit standen die Synthese und Charakterisierung neuartiger basischer Feststoffkatalysatoren. Für die Herstellung dieser neuen Materialien wurden Zeolithe, mesoporöse Molekularsiebe sowie mikroporöse und amorphe Aluminiumphosphate bei Temperaturen von 700 °C bis 850 °C im Ammoniakstrom behandelt. Die Charakterisierung erfolgte mittels Röntgen-Pulverdiffraktometrie, Stickstoffadsorption, Thermogravimetrie/Massenspektrometrie, temperaturprogrammierter Desorption von Pyrrol und DRIFT-spektroskopischen Untersuchungen. Die katalytischen Eigenschaften wurden mit der Knoevenagel-Kondensation von Benzaldehyd mit Malonsäuredinitril bzw. Cyanessigsäureethylester sowie der Umsetzung von Limonen in der Gasphase getestet. Als Referenzmaterial wurde Zeolith NaY, der mit verschiedenen Kationen ausgetauscht bzw. mit Cäsiumacetat imprägniert wurde, verwendet. Sowohl die Röntgen-Pulverdiffraktogramme als auch die Bestimmung der spezifischen Oberflächen durch Stickstoffadsorption ergaben, dass nach der Ammoniakbehandlung die Struktur der verwendeten Katalysatoren im Wesentlichen erhalten blieb. Anhand von DRIFT-Spektren, die während der Ammoniakbehandlung aufgenommen wurden, konnte nachgewiesen werden, dass ein Einbau von Stickstoff in die Gerüste der Zeolithe, mesoporösen Molekularsiebe und Aluminiumphosphate erfolgte. Mit Hilfe der temperaturprogrammierten Desorption von Pyrrol konnten verschiedene basische Zentren bei den einzelnen Katalysatoren detektiert werden. Durch die Nitridierung wurde bei fast allen Katalysatoren eine Veränderung der Adsorptionseigenschaften von Pyrrol gemessen, die auf eine größere Anzahl bzw. auf stärker basische Zentren hindeutet. IR-spektroskopische Untersuchungen zur Adsorption von Pyrrol zeigten, dass die Ammoniakbehandlung zu einer Zunahme der Stärke von basischen Zentren führt. Die katalytischen Tests in der Knoevenagel-Kondensation ergaben, dass in fast allen Fällen eine Aktivitätssteigerung des ammoniakbehandelten Katalysators im Vergleich zum unbehandelten Ausgangsmaterial erfolgte. Die Aktivität ist dabei abhängig von den Modifizierungsbedingungen wie z.B. Behandlungsdauer und Behandlungstemperatur, aber auch von den Lagerungsbedingungen. Als weitere Testreaktion wurde die Umsetzung von Limonen gewählt. Anhand von mit Alkalimetall ausgetauschten Zeolithen mit FAU-Struktur konnte gezeigt werden, dass die p-Cymol-Ausbeute ein Maß für die Basizität der Katalysatoren ist. Bei fast allen Katalysatoren wurde eine Steigerung der p-Cymol-Ausbeute infolge der Ammoniakbehandlung gefunden. Neben dem Si:Al-Verhältnis spielen auch die Gegenionen und die Anzahl von Silanolgruppen eine entscheidende Rolle.
Liquid Composite Moulding (LCM) has become an economic technique for the manufacture
of advanced composite lightweight structures in many cases. Meanwhile the
acronym LCM represents more than a dozen of varying process types, which all have
the principle in common that a liquid monomer is firstly injected into a cavity filled with
a reinforcing fibre preform and secondly it forms the part by chemically reacting to a
solid polymer network. A distinctive feature of the LCM process variations is their
applicability to the fabrication of a variety of different part sizes and shapes. Within
this development numerical process simulation has become an important engineering
tool for mould design and process control. Thereby the research focuses on the
simulation of resin flow through a fibrous reinforcement, because this turned out to be
the most critical process within the manufacture of composites by applying LCMTechnologies.
With the software commercially available the mould-filling pattern can
be simulated depending on the locations and number of inlet and outlet gates, resin
rheology, injection rate and pressure, thermal effects and the physics of liquid flow
through fibre preforms. Hereby the standard flow modelling bases on a proportional
relationship between the flow rate and the applied pressure gradient, which is known
as D´Arcy’s law. The describing proportional factor is called the permeability. Its
value depends on the considered flow direction because of a non-isotropic structural
arrangement of the fibre reinforcement. It becomes clear that the permeability affects
the injection process crucially and so the knowledge about it is indispensable for the
realistic prediction of a filling pattern by flow simulation.
Due to the complexity of the inner structure of a textile reinforcement the resulting
multiphase flow cannot be described adequately by an analytical model at the current
stage of research, so that the permeabilities of planar textile reinforcements like woven or non-crimped fabrics is usually obtained from flow measurements. A variety
of experimental set-ups were developed, which allow the tracking of the fluid flow
through the textile reinforcement. The permeability is derived from the flow data by
applying D´Arcy´s law. Most of these test-rigs allow the determination of the in-plane
flow characteristics only, because they are dominant in the most classical processing
techniques. But the simulation of these processes produces still significant errors,
which result from neglecting the out-of-plane flow. Since new liquid composite moulding
processes like SCRIMP™ or resin film infusion were developed, the knowledge of
the permeability in thickness direction becomes as important as the in-plane charac teristics so that researchers started to measure flow in thickness direction and developed
flow models which include the principle permeability in thickness direction. The
main arising difficulties are the measuring and the modelling for the calculation of the
permeability from flow front data. The objective of this work is to overcome these
problems by the development of a test-rig for the measure of the flow in thickness
direction and by determining a transformation rule, which addresses the unsolved
geometric boundary condition at the injection port.
After investigating the existing instrumentation for measuring flow in thickness direction
a new sensor concept is developed on the basis of ultrasound transmission,
which enables a steady collection of the actual position of a flow front. The applicability
of this test-rig was tested within the measure of the flow through different woven
and non-crimped fabrics. The permeability values, which were obtained from the flow
data with the aid of the improved analytic model, were validated by two-dimensional
radial flow experiments.
Die Nähtechnik in Verbindung mit Harzinfusions- und -injektionstechniken eröffnet
ein erhebliches Gewichts- und Kosteneinsparpotential primär belasteter
Strukturbauteile aus Faser-Kunststoff-Verbundwerkstoffen. Dabei ist es unter
bestimmten Voraussetzungen möglich, durch Vernähungen gezielte Steigerungen
mechanischer Eigenschaften zu erreichen. Ein genaues Verständnis wirksamer
Zusammenhänge bezüglich der Änderung mechanischer Kennwerte verglichen mit
dem unvernähten Verbund ist unverzichtbar, um einen Einsatz dieser Technologie im
zivilen Flugzeugbau voranzubringen.
Im Rahmen dieser Arbeit wird eine breit angelegte experimentelle Parameterstudie
zum Einfluss verschiedener Nähparameter auf Scheiben-Elastizitäts- und
Festigkeitseigenschaften von kohlenstofffaserverstärkten Epoxidharzverbunden unter
Zug- und Druckbelastung durchgeführt. Neben der Stichrichtung, der Garnfeinheit,
dem Nahtabstand und der Stichlänge wurde auch die Belastungsrichtung variiert. Bei
einigen Parametereinstellungen konnten keine Änderungen des Elastizitätsmoduls
oder der Festigkeit in der Laminatebene festgestellt werden, wohingegen in anderen
Fällen Reduktionen oder Steigerungen um bis zu einem Drittel des Kennwerts des
unvernähten Laminats beobachtet wurden. Dabei ist vor allem der Einfluss der
Garnfeinheit dominierend.
Die Fehlstellenausbildung infolge eines Stichs in Abhängigkeit der gewählten
Parameter und der Orientierung der Einzelschicht wurde anhand von Schliffbildern in
der Laminatebene untersucht. Ein erheblicher Einfluss der einzelnen Parameter auf
die Fehlstellenausbildung ist festzustellen, wobei wiederum die Garnfeinheit
dominiert. Anhand der Ergebnisse der Auswertung der Fehlstellenausbildung in den
Einzelschichten wurde ein empirisches Modell generiert, womit charakteristische
Fehlstellengröße n wie die Querschnittsfläche, die Breite und die Länge in
Abhängigkeit der genannten Parameter berechnet werden können.
Darauf aufbauend wurde ein Finite-Elemente-Elementarzellenmodell generiert, mit
welchem Scheiben-Elastizitätsgrößen vernähter Laminate abgeschätzt werden
können. Neben der Berücksichtigung der genannten Nähparameter ist der zentrale
Aspekt hierbei die Beschreibung eines Stichs in Form von Reinharzgebiet und
Faserumlenkungsbereich in jeder Einzelschicht.
Stitching technology in combination with Liquid Composite Molding techniques offers
a possibility to reduce significantly weight and costs of primarily loaded structural
parts made of Fiber Reinforced Polymers. Thereby, it is possible to enhance
mechanical properties simultaneously. It is essential to understand effective
correlations of all important parameters concerning changes in mechanical
characteristics due to additional stitching if stitching technologies have to be
established in the civil aircraft industry.
In this thesis, a broad experimental study on the influence of varying stitching
parameters on the membrane tensile and compressive modulus and strength of
carbon fiber reinforced epoxy laminates is presented. The direction of stitching,
thread diameter, spacing and pitch length as well as the direction of testing had been
varied. In some cases, no changes in modulus and strength could be found due to
the chosen parameters, whereas in other cases reductions or enhancements of up to
30 % compared to the unstitched laminate were observed. Thereby, the thread
diameter shows significant influence on these changes in mechanical properties.
In addition, the stitch and void formation in the thickness direction due to the stitching
parameters was investigated by evaluating micrographs in each layer of the laminate.
Again, the thread diameter showed an outstanding influence on the characteristics of
matrix pure area (void) and fiber disorientation. A mathematical model was evaluated
in order to predict in-plane characteristics of stitches and voids, from which the cross
sectional area, the width and the length of a void due to the chosen stitching
parameters can be derived.
Finally, a Finite Element based unit cell model was established to calculate elastic
constants of stitched FRP laminates. With this model it is possible to consider a stitch
as a matrix pure region and additionally an area of in-plane fiber disorientation
depending on the stitching parameters as introduced above. The model was
validated using the experimental data for tensile and compressive loading.
The outstanding flexibility of this FE unit cell approach is shown in a parametric
study, where different void formations as well as stitching parameters were varied in
a stitched, unidirectional laminate. It was found that three different aspects influence
significantly the in-plane elastic constants of stitched laminates. First of all, the
stitching parameters as well as the laminate characteristics define the shape of the
unit cell including the areas of the stitch and the fiber disorientation. Secondly,
stitching changes the fiber volume fraction in all layers, which causes changes in
elastic properties as well. Thirdly, the type and the direction of loading has to be
considered, because each change in the architecture of the laminate results in
different effects on the in-plane elastic constants namely tensile, compressive or
shear moduli as well as the Poisson´s ratios.
Characterization of neuronal activity in the auditory brainstem of rats: An optical imaging approach
(2004)
In this doctoral thesis, several aspects of neuronal activity in the rat superior olivary complex (SOC), an auditory brainstem structure, were analyzed using optical imaging with voltage-sensitive dyes (VSD). The thesis is divided into 5 Chapters. Chapter 1 is a general introduction, which gives an overview of the auditory brainstem and VSD imaging. In Chapter 2, an optical imaging method for the SOC was standardized, using the VSD RH795. To do so, the following factors were optimized: (1) An extracellular potassium concentration of 5 mM is necessary during the incubation and recording to observe synaptically evoked responses in the SOC. (2) Employing different power supplies reduced the noise. (3) Averaging of 10 subsequent trials yielded a better signal-to-noise ratio. (4) RH795 of 100 µM with 50 min prewash was optimal to image SOC slices for more than one hour. (5) Stimulus-evoked optical signals were TTX sensitive, revealing action potential-driven input. (6) Synaptically evoked optical signals were characterized to be composed of pre- and postsynaptic components. (7) Optical signals were well correlated with anatomical structures. Overall, this method allows the comparative measurement of electrical activity of cell ensembles with high spatio-temporal resolution. In Chapter 3, the nature of functional inputs to the lateral superior olive (LSO), the medial superior olive (MSO), and the superior paraolivary nucleus (SPN) were analyzed using the glycine receptor blocker strychnine and the AMPA/kainate receptor blocker CNQX. In the LSO, the known glutamatergic inputs from the ipsilateral, and the glycinergic inputs from the ipsilateral and contralateral sides, were confirmed. Furthermore, a CNQX-sensitive input from the contralateral was identified. In the MSO, the glutamatergic and glycinergic inputs from the ipsilateral and contralateral sides were corroborated. In the SPN, besides the known glycinergic input from the contralateral, I found a glycinergic input from the ipsilateral and I also identified CNQX-sensitive inputs from the contralateral and ipsilateral sides. Together, my results thus corroborate findings obtained with different preparations and methods, and provide additional information on the pharmacological nature of the inputs. In Chapter 4, the development of glycinergic inhibition for the LSO, the MSO, the SPN, and the medial nucleus of the trapezoid body (MNTB) was studied by characterizing the polarity of strychnine-sensitive responses. In the LSO, the high frequency region displayed a shift in the polarity at P4, whereas the low frequency region displayed at P6. In the MSO, both the regions displayed the shift at P5. The SPN displayed a shift in the polarity at E18-20 without any regional differences. The MNTB lacked a shift between P3-10. Together, these results demonstrate a differential timing in the development of glycinergic inhibition in these nuclei. In Chapter 5, the role of the MSO in processing bilateral time differences (t) was investigated. This was done by stimulating ipsilateral and contralateral inputs to the MSO with different t values. In preliminary experiments, the postsynaptic responses showed a differential pattern in the spread of activity upon different t values. This data demonstrates a possible presence of delay lines as proposed by Jeffress in the interaural time difference model of sound localization. In conclusion, this study demonstrates the usage of VSD imaging to analyze the neuronal activity in auditory brainstem slices. Moreover, this study expands the knowledge of the inputs to the SOC, and has identified one glycinergic and three AMPA/kainate glutamatergic novel inputs to the SOC nuclei.