Kaiserslautern - Fachbereich Mathematik
Refine
Document Type
- Doctoral Thesis (4) (remove)
Language
- English (4)
Has Fulltext
- yes (4)
Keywords
- Elastizität (4) (remove)
Faculty / Organisational entity
In this thesis one considers the periodic homogenization of a linearly coupled magneto-elastic model problem and focuses on the derivation of spectral methods to solve the obtained unit cell problem afterwards. In the beginning, the equations of linear elasticity and magnetism are presented together with the physical quantities used within. After specifying the model assumptions, the system of partial differential equations is rewritten in a weak form for which the existence and uniqueness of solutions is discussed. The model problem then undergoes a homogenization process where the original problem is approximated by a substitute problem with a repeating micro-structural geometry that was generated from a representative volume element (RVE). The following separation of scales, which can be achieved either by an asymptotic expansion or through a two-scale limit process, yields the homogenized problem on the macroscopic scale and the periodic unit cell problem. The latter is further analyzed using Fourier series, leading to periodic Lippmann-Schwinger type equations allowing for the development of matrix-free solvers. It is shown that, while it is possible to craft a scheme for the coupled problem from the purely elastic and magnetic Lippmann-Schwinger equations alone without much additional effort, a more general setting is provided when deriving a Lippmann-Schwinger equation for the coupled system directly. These numerical approaches are then validated with some analytically solvable test problems, before their performance is tested against each other for some more complex examples.
Composite materials are used in many modern tools and engineering applications and
consist of two or more materials that are intermixed. Features like inclusions in a matrix
material are often very small compared to the overall structure. Volume elements that
are characteristic for the microstructure can be simulated and their elastic properties are
then used as a homogeneous material on the macroscopic scale.
Moulinec and Suquet [2] solve the so-called Lippmann-Schwinger equation, a reformulation of the equations of elasticity in periodic homogenization, using truncated
trigonometric polynomials on a tensor product grid as ansatz functions.
In this thesis, we generalize their approach to anisotropic lattices and extend it to
anisotropic translation invariant spaces. We discretize the partial differential equation
on these spaces and prove the convergence rate. The speed of convergence depends on
the smoothness of the coefficients and the regularity of the ansatz space. The spaces of
translates unify the ansatz of Moulinec and Suquet with de la Vallée Poussin means and
periodic Box splines, including the constant finite element discretization of Brisard and
Dormieux [1].
For finely resolved images, sampling on a coarser lattice reduces the computational
effort. We introduce mixing rules as the means to transfer fine-grid information to the
smaller lattice.
Finally, we show the effect of the anisotropic pattern, the space of translates, and the
convergence of the method, and mixing rules on two- and three-dimensional examples.
References
[1] S. Brisard and L. Dormieux. “FFT-based methods for the mechanics of composites:
A general variational framework”. In: Computational Materials Science 49.3 (2010),
pp. 663–671. doi: 10.1016/j.commatsci.2010.06.009.
[2] H. Moulinec and P. Suquet. “A numerical method for computing the overall response
of nonlinear composites with complex microstructure”. In: Computer Methods in
Applied Mechanics and Engineering 157.1-2 (1998), pp. 69–94. doi: 10.1016/s00457825(97)00218-1.
In the theoretical part of this thesis, the difference of the solutions of the elastic and the elastoplastic boundary value problem is analysed, both for linear kinematic and combined linear kinematic and isotropic hardening material. We consider both models in their quasistatic, rate-independent formulation with linearised geometry. The main result of the thesis is, that the differences of the physical obervables (the stresses, strains and displacements) can be expressed as composition of some linear operators and play operators with respect to the exterior forces. Explicit homotopies between both solutions are presented. The main analytical devices are Lipschitz estimates for the stop and the play operator. We present some generalisations of the standard estimates. They allow different input functions, different initial memories and different scalar products. Thereby, the underlying time involving function spaces are the Sobolov spaces of first order with arbitrary integrability exponent between one and infinity. The main results can easily be generalised for the class of continuous functions with bounded total variation. In the practical part of this work, a method to correct the elastic stress tensor over a long time interval at some chosen points of the body is presented and analysed. In contrast to widespread uniaxial corrections (Neuber or ESED), our method takes multiaxiality phenomena like cyclic hardening/softening, ratchetting and non-masing behaviour into account using Jiang's model of elastoplasticity. It can be easily adapted to other constitutive elastoplastic material laws. The theory for our correction model is developped for linear kinematic hardening material, for which error estimated are derived. Our numerical algorithm is very fast and designed for the case that the elastic stress is piecewise linear. The results for the stresses can be significantly improved with Seeger's empirical strain constraint. For the improved model, a simple predictor-correcor algorithm for smooth input loading is established.
Over the last decades, mathematical modeling has reached nearly all fields of natural science. The abstraction and reduction to a mathematical model has proven to be a powerful tool to gain a deeper insight into physical and technical processes. The increasing computing power has made numerical simulations available for many industrial applications. In recent years, mathematicians and engineers have turned there attention to model solid materials. New challenges have been found in the simulation of solids and fluid-structure interactions. In this context, it is indispensable to study the dynamics of elastic solids. Elasticity is a main feature of solid bodies while demanding a great deal of the numerical treatment. There exists a multitude of commercial tools to simulate the behavior of elastic solids. Anyhow, the majority of these software packages consider quasi-stationary problems. In the present work, we are interested in highly dynamical problems, e.g. the rotation of a solid. The applicability to free-boundary problems is a further emphasis of our considerations. In the last years, meshless or particle methods have attracted more and more attention. In many fields of numerical simulation these methods are on a par with classical methods or superior to them. In this work, we present the Finite Pointset Method (FPM) which uses a moving least squares particle approximation operator. The application of this method to various industrial problems at the Fraunhofer ITWM has shown that FPM is particularly suitable for highly dynamical problems with free surfaces and strongly changing geometries. Thereby, FPM offers exactly the features that we require for the analysis of the dynamics of solid bodies. In the present work, we provide a numerical scheme capable to simulate the behavior of elastic solids. We present the system of partial differential equations describing the dynamics of elastic solids and show its hyperbolic character. In particular, we focus our attention to the constitutive law for the stress tensor and provide evolution equations for the deviatoric part of the stress tensor in order to circumvent limitations of the classical Hooke's law. Furthermore, we present the basic principle of the Finite Pointset Method. In particular, we provide the concept of upwinding in a given direction as a key ingredient for stabilizing hyperbolic systems. The main part of this work describes the design of a numerical scheme based on FPM and an operator splitting to take the different processes within a solid body into account. Each resulting subsystem is treated separately in an adequate way. Hereby, we introduce the notion of system-inherent directions and dimensional upwinding. Finally, a coupling strategy for the subsystems and results are presented. We close this work with some final conclusions and an outlook on future work.