B.3.1 Semiconductor Memories (NEW) (B.7.1)
Refine
Year of publication
- 2016 (4)
Document Type
Language
- English (4)
Has Fulltext
- yes (4)
Keywords
- Cache (1)
- Memristor (1)
- PIM (1)
- Processing-in-Memory (1)
- STT-MRAM (1)
- Spin Orbit Torque Memory (1)
Faculty / Organisational entity
The energy efficiency of today’s microcontrollers is supported by the extensive usage of low-power mechanisms. A full power-down requires in many cases a complex, and maybe error prone, administration scheme, because data from the volatile memory have to be stored in a flash based back- up memory. New types of non-volatile memory, e.g. in RRAM technology, are faster and consumes a fraction of the energy compared to flash technology. This paper evaluates power gating for WSN with RRAM as back-up memory.
This paper briefly discusses a new architecture, Computation-In-Memory (CIM Architecture), which performs “processing-in-memory”. It is based on the integration of storage and computation in the same physical location (crossbar topology) and the use of non-volatile resistive-switching technology (memristive devices or memristors in short) instead of CMOS technology. The architecture has the potential of improving the energy-delay product, computing efficiency and performance area by at least two orders of magnitude.
A counter-based read circuit tolerant to process variation for low-voltage operating STT-MRAM
(2016)
The capacity of embedded memory on LSIs has kept increasing. It is important to reduce the leakage power of embedded memory for low-power LSIs. In fact, the ITRS predicts that the leakage power in embedded memory will account for 40% of all power consumption by 2024 [1]. A spin transfer torque magneto-resistance random access memory (STT-MRAM) is promising for use as non-volatile memory to reduce the leakage power. It is useful because it can function at low voltages and has a lifetime of over 1016 write cycles [2]. In addition, the STT-MRAM technology has a smaller bit cell than an SRAM. Making the STT-MRAM is suitable for use in high-density products [3–7]. The STT-MRAM uses magnetic tunnel junction (MTJ). The MTJ has two states: a parallel state and an anti-parallel state. These states mean that the magnetization direction of the MTJ’s layers are the same or different. The directions pair determines the MTJ’s magneto- resistance value. The states of MTJ can be changed by the current flowing. The MTJ resistance becomes low in the parallel state and high in the anti-parallel state. The MTJ potentially operates at less than 0.4 V [8]. In other hands, it is difficult to design peripheral circuitry for an STT-MRAM array at such a low voltage. In this paper, we propose a counter-based read circuit that functions at 0.4 V, which is tolerant of process variation and temperature fluctuation.
Magnetic spin-based memory technologies are a promising solution to overcome the incoming limits of microelectronics. Nevertheless, the long write latency and high write energy of these memory technologies compared to SRAM make it difficult to use these for fast microprocessor memories, such as L1- Caches. However, the recent advent of the Spin Orbit Torque (SOT) technology changed the story: indeed, it potentially offers a writing speed comparable to SRAM with a much better density as SRAM and an infinite endurance, paving the way to a new paradigm in processor architectures, with introduction of non- volatility in all the levels of the memory hierarchy towards full normally-off and instant-on processors. This paper presents a full design flow, from device to system, allowing to evaluate the potential of SOT for microprocessor cache memories and very encouraging simulation results using this framework.