Refine
Year of publication
Document Type
- Article (41) (remove)
Has Fulltext
- yes (41)
Keywords
- AG-RESY (41) (remove)
Faculty / Organisational entity
Den in der industriellen Produktion eingesetzten Manipulatoren fehlt in der Regel die Möglichkeit, ihre Umwelt wahrzunehmen. Damit Mensch und Roboter in einem gemeinsamen Arbeitsraum arbeiten können, wird im SIMERO-System die Transferbewegung des Roboters durch Kameras abgesichert. Dieses Kamerasystem wird auf Ausfall überprüft. Dabei werden Fehler in der Bildübertragung und Positionierungsfehler der Kameras betrachtet.
In many robotic applications, the teaching of points in space is necessary to register the robot coordinate system with the one of the application. Robot-human interaction is awkward and dangerous for the human because of the possibly large size and power of the robot, so robot movements must be predictable and natural. We present a novel hybrid control algorithm which provides the needed precision in small scale movements while allowing for fast and intuitive large scale translations.
Zur Zeit haben Industrieroboter nur eine sehr begrenzte Wahrnehmung ihrer Umwelt. Wenn sich Menschen im Arbeitsraum des Roboters aufhalten sind sie daher gefährdet. Durch eine Einteilung der möglichen Roboterbewegung in verschiedene Klassen kann gezeigt werden, dass die für einen Menschen im Arbeitsraum gefährlichste Bewegung die freie Transferbewegung ist. Daher besteht die betrachtete Aufgabe darin, diese Transferbewegung eines Manipulators durchzuführen, ohne mit dynamischen Hindernissen, wie zum Beispiel Menschen, zu kollidieren. Das SIMERO-System gliedert sich in die vier Hauptkomponenten Bildverarbeitung, Robotermodellierung, Kollisionserkennung und Bahnplanung. Diese Komponenten werden im einzelnen vorgestellt. Die Leistungsfähigkeit des Systems und die weiteren Verbesserungen werden an einem Versuch exemplarisch gezeigt.
This paper analyzes the problem of sensor-based colli-sion detection for an industrial robotic manipulator. A method to perform collision tests based on images taken from several stationary cameras in the work cell is pre-sented. The collision test works entirely based on the im-ages, and does not construct a representation of the Carte-sian space. It is shown how to perform a collision test for all possible robot configurations using only a single set of images taken simultaneously.
It is difficult for robots to handle a vibrating deformable object. Even for human beings it is a high-risk operation to, for example, insert a vibrating linear object into a small hole. However, fast manipulation using a robot arm is not just a dream; it may be achieved if some important features of the vibration are detected online. In this paper, we present an approach for fast manipulation using a force/torque sensor mounted on the robot's wrist. Template matching method is employed to recognize the vibrational phase of the deformable objects. Therefore, a fast manipulation can be performed with a high success rate, even if there is acute vibration. Experiments inserting a deformable object into a hole are conducted to test the presented method. Results demonstrate that the presented sensor-based online fast manipulation is feasible.
Virtual Robot Programming for Deformable Linear Objects: System concept and Prototype Implementation
(2002)
In this paper we present a method and system for robot programming using virtual reality techniques. The proposed method allows intuitive teaching of a manipulation task with haptic feedback in a graphical simulation system. Based on earlier work, our system allows even an operator who lacks specialized knowledge of robotics to automatically generate a robust sensor-based robot program that is ready to execute on different robots, merely by demonstrating the task in virtual reality.
This paper deals with the handling of deformable linear objects (DLOs), such as hoses, wires or leaf springs. It investigates the a priori knowledge about the 6-dimensional force/torque signal for a changing contact situation between a DLO and a rigid polyhedral obstacle. The result is a complete list, containing for each contact change the most significant combination of force/torque signal components together with a description of the expected signal curve. This knowledge enables the reliable detection of changes in the DLO contact situation and with it the implementation of sensor-based manipulation skills for all possible contact changes.
We present a system concept allowing humans to work safely in the same environment as a robot manipulator. Several cameras survey the common workspace. A look-up-table-based fusion algorithm is used to back-project directly from the image spaces of the cameras to the manipulator?s con-figuration space. In the look-up-tables both, the camera calibration and the robot geometry are implicitly encoded. For experiments, a conven-tional 6 axis industrial manipulator is used. The work space is surveyed by four grayscale cameras. Due to the limits of present robot controllers, the computationally expensive parts of the system are executed on a server PC that communicates with the robot controller via Ethernet.
Diese Arbeit skizziert einen allgemeinen Ansatz zur Montage deformierbarer linearer Werkstücke (wie Kabel, Drähte, Schläuche, Blattfedern) mit Industrierobotern. Hierzu werden insbesondere die folgenden zwei Aspekte betrachtetet. Erstens die zuverlässige Ausführung der Montage unter Berücksichtigung der Werkstückdeformation und anderer Unsicherheiten, zweitens die numerische Simulation des Werkstückverhaltens. Zur robusten Ausführung der Montage wird das aus der Montage starrer Werkstücke bekannte Konzept der Manipulation-Skills auf deformierbare Werkstücke übertragen. Bei der numerischen Simulation wird insbesondere die Bestimmung der Greifertrajektorie bei gegebener Aufgabenstellung betrachtet.
Manipulating deformable linear objects - Vision-based recognition of contact state transitions -
(1999)
A new and systematic approach to machine vision-based robot manipulation of deformable (non-rigid) linear objects is introduced. This approach reduces the computational needs by using a simple state-oriented model of the objects. These states describe the relation of the object with respect to an obstacle and are derived from the object image and its features. Therefore, the object is segmented from a standard video frame using a fast segmentation algorithm. Several object features are presented which allow the state recognition of the object while being manipulated by the robot.
The task of handling non-rigid one-dimensional objects by a robot manipulation system is investigated. To distinguish between different non-rigid object behaviors, five classes of deformable objects from a robotic point of view are proposed. Additionally, an enumeration of all possible contact states of one-dimensional objects with polyhedral obstacles is provided. Finally, the qualitative motion behavior of linear objects is analyzed for stable point contacts. Experiments with different materials validate the analytical results.
This paper deals with the robust manipulation of deformable linear objects such as hoses or wires. We propose manipulation based on thequalitative contact state between the deformable workpiece and a rigid environment. First, we give an enumeration of possible contact states and discuss the main characteristics of each state. Second, we investigate the transitions which are possible between the contact states and derive criteria and conditions for each of them. Finally, we apply the concept of contact states and state transitions to the description of a typical assembly task.
This paper deals with the problem of picking-up deformable linear workpieces such as cables or ropes with an industrial robot. First, we give a motivation and problem definition. Based on a brief conceptual discussion of possible approaches we derive an algorithm for picking-up hanging deformable linear objects using two light barriers as sensor system. For this hardware, a skill-based approach is described and the parameters and major influence factors are discussed. In an experi- mental study, the feasibility and reliability under diverse conditions are investigated. The algorithm is found to be very reliable, if certain boundary conditions are met.
In this paper, we investigate the efficient simulation of deformable linear objects. Based on the state of the art, we extend the principle of minimizing the potential energy by considering plastic deformation and describe a novel approach for treating workpiece dynamics. The major influence factors on precision and computation time are identified and investigated experimentally. Finally, we discuss the usage of parallel processing in order to reduce the computation time.
A new problem for the automated off-line programming of industrial robot application is investigated. The Multi-Goal Path Planning is to find the collision-free path connecting a set of goal poses and minimizing e.g. the total path length. Our solution is based on an earlier reported path planner for industrial robot arms with 6 degrees-of-freedom in an on-line given 3D environment. To control the path planner, four different goal selection methods are introduced and compared. While the Random and the Nearest Pair Selection methods can be used with any path planner, the Nearest Goal and the Adaptive Pair Selection method are favorable for our planner. With the latter two goal selection methods, the Multi-Goal Path Planning task can be significantly accelerated, because they are able to automatically solve the simplest path planning problems first. Summarizing, compared to Random or Nearest Pair Selection, this new Multi-Goal Path Planning approach results in a further cost reduction of the programming phase.
We present a parallel path planning method that is able to automatically handle multiple goal configurations as input. There are two basic approaches, goal switching and bi-directional search, which are combined in the end. Goal switching dynamically selects a fa-vourite goal depending on some distance function. The bi-directional search supports the backward search direction from the goal to the start configuration, which is probably faster. The multi-directional search with goal switching combines the advantages of goal switching and bi-directional search. Altogether, the planning system is enabled to select one of the pref-erable goal configuration by itself. All concepts are experimentally validated for a set of benchmark problems consisting of an industrial robot arm with six degrees of freedom in a 3D environment.
Es wird die Aufgabe der vollständigen räumlichen Abdeckung von Regionen in durch mobile Roboter betrachtet. Da-bei können die Regionen in vollständig, teilweise oder nicht bekannten Umgebungen liegen. Zur Lösung wird ein Verfahren aus der Computer-grafik zum Füllen von Bildregionen zugrunde gelegt. Das Verfahren hat eine lokale Sichtweise und läßt somit den Einsatz von Sensordaten und das Auftreten von unvorhergesehenen Hindernissen zu. Die Regionen können durch Karten off-line vorgegeben sein oder durch Sensordaten on-line aufgebaut werden. Dennoch ist eine vollständige und genau einma-lige Flächenbearbeitung garantiert. Dies wird an Beispielen in einer graphischen Visualisierung der Realzeit-Steuerung des Roboters validiert.
Anwendungen effizienter Verfahren in Automation - Universität Karlsruhe auf der SPS97 in Nürnberg -
(1998)
This paper discusses the problem of automatic off-line programming and motion planning for industrial robots. At first, a new concept consisting of three steps is proposed. The first step, a new method for on-line motion planning is introduced. The motion planning method is based on the A*-search algorithm and works in the implicit configuration space. During searching, the collisions are detected in the explicitly represented Cartesian workspace by hierarchical distance computation. In the second step, the trajectory planner has to transform the path into a time and energy optimal robot program. The practical application of these two steps strongly depends on the method for robot calibration with high accuracy, thus, mapping the virtual world onto the real world, which is discussed in the third step.
This paper presents a new approach to parallel motion planning for industrial robot arms with six degrees of freedom in an on-line given 3D environment. The method is based on the A*-search algorithm and needs no essential off-line computations. The algorithm works in an implicitly descrete configuration space. Collisions are detected in the cartesian workspace by hierarchical distance computation based on the given CAD model. By decomposing the 6D configuration space into hypercubes and cyclically mapping them onto multiple processing units, a good load distribution can be achieved. We have implemented the parallel motion planner on a workstation cluster with 9 PCs and tested the planner for several benchmark environments. With optimal discretisation, the new approach usually shows linear, and sometimes even superlinear speedups. In on-line provided environments with static obstacles, the parallel planning times are only a few seconds.