Refine
Year of publication
- 2002 (55) (remove)
Document Type
- Doctoral Thesis (32)
- Periodical Part (11)
- Preprint (4)
- Article (2)
- Part of a Book (1)
- Diploma Thesis (1)
- Master's Thesis (1)
- Moving Images (1)
- Report (1)
- Study Thesis (1)
Language
- German (55) (remove)
Has Fulltext
- yes (55)
Keywords
- AG-RESY (5)
- RONAF (3)
- Robotik (3)
- Androgene (2)
- Navigation (2)
- Prozesssteuerung (2)
- Simulation (2)
- 4-Aminopiperidin (1)
- 4-Aminopiperidine (1)
- A431 (1)
- Abscheidung (1)
- Absorption (1)
- Abwassersystem (1)
- Aktien (1)
- Aktivitätskoeffizient (1)
- Alkin (1)
- Altern (1)
- Antiandrogene (1)
- Antiestrogene (1)
- Apoptosis (1)
- Arachidonsäurestoffwechsel (1)
- Arsen (1)
- Arseniden (1)
- Assembly (1)
- Ausparken (1)
- Autökologie (1)
- BAD (1)
- BDH (1)
- Bahnplanung (1)
- Bamipin (1)
- Batchkalorimetrie (1)
- Bemessung (1)
- Beschichten (1)
- Bodenfilter (1)
- Börse (1)
- CAR <Roboter> (1)
- CAS (1)
- CHAMP-Mission (1)
- Car-Sharing (1)
- CarSharing (1)
- Carcinogenese (1)
- Cat-CVD-Verfahren (1)
- Chemolumineszenz (1)
- Chloratom (1)
- Clostridium difficile (1)
- Cochlea Implant (1)
- Cochlea Implantat (1)
- Coenogonium (1)
- Combined Mobility (1)
- Computer assistierte Chirurgie (1)
- Computer assistierte Chirurgie (CAS) (1)
- Computersimulation (1)
- Cre-loxP-System (1)
- Cryptothecia (1)
- Cy (1)
- Cytokine (1)
- Deterioration (1)
- Deuteromycetes (1)
- Dialkali-Halogen (1)
- Diamine (1)
- Dotieren (1)
- Dreikerncluster (1)
- Dry Weight (1)
- Dünnschichtsolarz (1)
- EPR (1)
- ESR (1)
- Einparken (1)
- Elektrolytlösungen (1)
- Emissionen (1)
- Entlastungsverhalten (1)
- Estrogene (1)
- Fermentation (1)
- Finanzmathematik (1)
- Finanzzeitreihe (1)
- Finite-Elemente-Methode (1)
- Flechtenalgen (1)
- Floatingpotential (1)
- Flüssig-Flüssig System (1)
- Flüssig-Flüssig-Gleichgewicht (1)
- Force Feedback (1)
- Force-Torque (1)
- Fräsen (1)
- Fungi (1)
- Funktionsmorphologie (1)
- GGPP (1)
- Gebäude (1)
- Genregulation (1)
- Geodäsie (1)
- Gewässerschutz (1)
- Glycogen Synthase Kinase 3 (1)
- Gravitation (1)
- HETE (1)
- HMG-CoA-Reduktase (1)
- HODE (1)
- Hals-Nasen-Ohren-Chirurgie (1)
- Hals-Nasen-Ohren-Heilkunde (1)
- Hexaphenylcyclohexaarsan (1)
- Histamin (1)
- Hormon (1)
- Hot-Wire-Verfahren (1)
- Hydride (1)
- Implan (1)
- Inhibitor (1)
- Interaktion (1)
- Interaktive Kunst (1)
- Interfaces (1)
- Inverses Problem (1)
- JAK-STAT-Weg (1)
- JAK-STAT-pathway (1)
- Klimagerechtes Bauen (1)
- Kombinierte Mobilität (1)
- Komplex-analytische Struktur (1)
- Komplexe (1)
- Konfiguration <Chemie> (1)
- Konformation (1)
- Kooperation (1)
- Kraftrückkopplung (1)
- Kunst im öffentlichen Raum (1)
- Kühlturm (1)
- Lebensdaueranalyse (1)
- Lehrerweiterbildung (1)
- Leichtbauweise Faser-Kunststoff-Verbundwerkstoffe (FKV) (1)
- Lichtflecke (1)
- Linksparken (1)
- Lipoxygenasen (1)
- MAP-Kinase (1)
- MCF-7 (1)
- META-AKAD (1)
- Manipulation skills (1)
- Markierungsgen (1)
- Mathematikunterricht (1)
- Maus (1)
- Medienfassaden (1)
- Mediengesellschaft (1)
- Mehrskalenanalyse (1)
- Mensch-Roboter-Kooperation (1)
- Metabolismus (1)
- Metallkomplexe (1)
- Mikroklima (1)
- Modelica (1)
- Modell (1)
- Monte-Carlo-Simulation (1)
- Mund-Kiefer-Gesichts-Chirurgie (1)
- NO-Synthase (1)
- Natriummolekül (1)
- Neue Medien (1)
- New Media Art (1)
- On-line-Methode (1)
- On-line-Verfahren (1)
- Operationsroboter (1)
- Optionen (1)
- Organobleche (1)
- Organometallcluster (1)
- Parken (1)
- Parkmanöver (1)
- Particle-In-Cell (1)
- Patrizipation (1)
- Paxillin (1)
- Phasengleichgewicht (1)
- Phosphatidylinositolkinase <3-> (1)
- Phosphodiesterasehemmer (1)
- Phosphor (1)
- Photochemie (1)
- Phyllopsora (1)
- Physiologie (1)
- Pilze (1)
- Plasma / Dimension 2 (1)
- Plasma-Immersions-Implantation (1)
- Plasmaphysik (1)
- Plasmarandschicht (1)
- Plasmaschicht (1)
- Plasmaschwingung (1)
- Plasmatechnik (1)
- Polycycloarsan (1)
- Polyelektrolyt (1)
- Polyester- und Epoxidharze (1)
- Polymerlösung (1)
- Portfolio-Optimierung (1)
- Potenzialhyperfläche (1)
- Prepreg-Technologie (1)
- Proliferation (1)
- Promotor (1)
- Pteridine (1)
- Public Space (1)
- Public Transport (1)
- RODEO (1)
- Reaktionsdynamik (1)
- Reaktionsquerschnitt (1)
- Reaktivität (1)
- Regenwasserbehandlung (1)
- Regularisierung (1)
- Reinigungsleistung (1)
- Retentionsbodenfilter (1)
- Rho (1)
- Rho-Proteine (1)
- Roboter (1)
- Roboterarm (1)
- Robotics (1)
- Ruthenium (1)
- Ruthenium-Phosphor-Cluster (1)
- SIMERO (1)
- Schale (1)
- Schichtstruktur (1)
- Schlauchflechten (1)
- Schnittstellen (1)
- Schädelbasis (1)
- Sedimentationsbecken (1)
- Sensitivitätsanalyse (1)
- Signaltransduktion (1)
- Silicium / Amorpher Zustand (1)
- Simulationsmodelle (1)
- Softwarewiederverwendung (1)
- Solarzelle (1)
- Stadtraum (1)
- Stahlbeton (1)
- Statine (1)
- Stickstoffmonoxidradikal (1)
- Straßenentwässerung (1)
- Styrene (1)
- Surface-Hopping (1)
- Sustainable architecture (1)
- Thelotrema (1)
- Thermodynamisches Gleichgewicht (1)
- Thermoplast-Elastomer- und Duromer-Matrizes (1)
- Thermoplast-Tapelegeverfahren (1)
- Trajektorie <Kinematik> (1)
- Trockengewicht (1)
- Tropischer Regenwald (1)
- Unterholz (1)
- Urban Media (1)
- Urban Screens (1)
- Verarbeitungstechnik (1)
- Verkehrsablauf (1)
- Verkehrssicherheit (1)
- Versuchsanlage (1)
- Vinylcyclopropan (1)
- Wavelets (1)
- Wiederverwertung Altgummipartikel (1)
- Wirkstoffe (1)
- Wirkungsgrad (1)
- Zellskelett (1)
- activity coefficient (1)
- alkyne (1)
- androgene (1)
- aqueous solution (1)
- arachidonic acid (1)
- bicyclische heterocyclische Verbindungen (1)
- building (1)
- carcinogenesis (1)
- chemiluminescence (1)
- complex (1)
- cooling tower shell (1)
- cytokine (1)
- deformable objects (1)
- deterioration (1)
- dialkali-halogen (1)
- digitale Installationen (1)
- doping (1)
- endlosfaserverstärkte Thermoplaste (1)
- endocrine disruptors (1)
- endokrine Disruptoren (1)
- estrogene (1)
- expression (1)
- floating potential (1)
- großflächige Abscheidung (1)
- human robot cooperation (1)
- hydrides (1)
- iNOS (1)
- induzierbar (1)
- knock-out (1)
- konditionaler knock-out (1)
- lecithinabhängige Dehydrogenase (1)
- lecithine dependent dehydrogenase (1)
- liquid-liquid equilibrium (1)
- mRNA-Expression (1)
- mediale Architektur (1)
- mediale Inszenierung (1)
- mice (1)
- mouse (1)
- particle-in-cell (1)
- phase equilibria (1)
- phase equilibrium (1)
- phosphorus (1)
- photochemistry (1)
- plasma sheaths (1)
- plasma source ion implantation (1)
- plasma-based ion implantation and deposition (1)
- polyelectrolyte (1)
- polymer solution (1)
- reaction cross section (1)
- reactivity (1)
- real-time PCR (1)
- reduktive Decyanierung (1)
- robotergestützt (1)
- ruthenium (1)
- safe human robot cooperation (1)
- semiclassical (1)
- semiklassisch (1)
- simulation (1)
- simulierte Finanzzeitreihe (1)
- software reuse (1)
- solutions containing electrolytes (1)
- surface-hopping (1)
- technische Analyse (1)
- thermisches Gebäudeverhalten (1)
- three membered metall cluster (1)
- urbaner Raum (1)
- wässrige Lösung (1)
- ÖPNV (1)
- Öffentlichkeitsbildung (1)
- Östrogene (1)
- Übergangsmetallcyclopentadienyl-Komplexe (1)
- öffentlicher Raum (1)
Faculty / Organisational entity
- Kaiserslautern - Fachbereich Chemie (13)
- Kaiserslautern - Fachbereich Sozialwissenschaften (11)
- Kaiserslautern - Fachbereich Informatik (7)
- Kaiserslautern - Fachbereich Maschinenbau und Verfahrenstechnik (7)
- Kaiserslautern - Fachbereich ARUBI (6)
- Kaiserslautern - Fachbereich Biologie (3)
- Kaiserslautern - Fachbereich Mathematik (2)
- Universität (2)
- Fraunhofer (ITWM) (1)
- Kaiserslautern - Fachbereich Elektrotechnik und Informationstechnik (1)
Zur nähtechnischen Konfektion von textilen Verstärkungsstrukturen für Faser-Kunststoff-Verbunde
(2002)
The further exploitation of Liquid-Composite-Moulding Technologies (LCM) for the
manufacture of Fiber-Reinforced-Plastics (FRP) relies on an eligible preforming
process. Preforming of fibrous reinforcements aspires the manufacture of dry
skeletons of the fiber assembly with the desired fiber orientation based on a predefined
fiber type. The LCM processing must be maintained by the preforming
technique. However, FRP part properties - given from fiber orientations - should not be
affected.
Sewing technologies, in all their varieties, can be applied as very flexible preforming
methods. Analogies between making-up dry reinforcement structures and the classical
field of sewing, e.g. garment manufacture, led to a substantial progress in technologies
available for preforimg as well as to increased economical benefits through the
application of sew-preforming.
A comprehensive understanding of the application of sewing technologies for FRP –
from the treatment of a semi-finished product to the infusion of a stitched preform – is
the basis for the design of an all new process chain.
The present work classifies this new preforming method within the existing
technologies. Furthermore, critical sewing machine elements are evaluated regarding
FRP compatibility. Stitching parameters and their impact on the reinforcement quality
as well as the FRP processing (LCM) are discussed.
Focusing on the economic efficiency of the sewing preforming technology, the critical
number of parts for selecting the right preform technology is discussed. The new
process chain enables the selection of the critical vertical range of preform
manufacture.
The large variety of preform design parameters, e. g. stitch density, needle thread
tension, seam type, sub-preform-structures etc., requires a “Preform-Engineering”,
covering an interface between preform manufacturing and FRP-part design. This
parallel engineering of part-, preform- and process-design leads to a global reflection
of the LCM technology. Thus, FRP part quality can be raised.
Endless fibre reinforced thermoplastic sheets (organic sheets) are significantly gaining
in importance due to their outstanding characteristics. In comparison to common
thermoplastic press moulding composites with random reinforcement like GMT and
LFRT they offer remarkably better specific mechanical properties (stiffness, strength).
And different from endless fibre reinforced thermosets, they also possess high
toughness and show good impact behaviour. Furthermore, they enable welding and
have an appreciable recycling potential.
The manufacturing steps, beginning from impregnation and consolidation of the
semi-finished sheets up to thermoforming and welding to obtain the final part, represent
a closed processing chain. This results in short cycle times and the potential for
mass production.
However, this material class is rarely used because of its cost and surface quality
problems. Therefore, only a few applications exist as demanding functional or structural
parts.
High costs emerge in consequence of either expensive raw materials (carbon fibres,
technical thermoplastics) or the sophisticated processing technique concerning the
impregnation and consolidation step (double belt press). The surface quality problem
is mainly caused by the print-through of reinforcing fibres, which therefore precludes
applications in visible regions, especially in the field of automotive exterior panels.
The aim of the thesis was to enhance the chances of application by improving the
surface quality of endless fibre reinforced thermoplastics. Thus the surface characteristics
and possibilities for reproducible quantitative measuring were identified. Surface
roughness, gloss rate, profile amplitude and wavelength as well as short (sw)
and long term (lw) waviness were chosen as appropriate values. By varying the type of fibre, matrix, fabric and coating the influence of material parameters on the surface
appearance could then be investigated.
It became obvious that the fibre print-through is a result of the significantly higher
volume shrinkage of the thermoplastic resin (higher coefficient of linear thermal expansion)
in comparison to that of the reinforcement during the cooling process, combined
with an uneven distribution of resin and fibres. Thus, amorphous matrices that
have no shrinkage due to crystallisation and a preferably small thermal induced density
growth lead to significantly better surface qualities (from lw = 60 to lw = 20). Qualitatively the texture is dominated by the reinforcing architecture. The kind of textile
weaving and fineness of the fibre bundles determine the wavelength of the profile
deflection.
It was found that the coating has the largest influence on the surface appearance. A
common varnish layer with a thickness of only 40 μm enhances the gloss of the substrate
which makes the surface waviness even more clearly visible. However, optimising
the varnish system with additional base coat or filling layers drastically reduced
the waviness but did not raze it completely (lw = 10). Only the application of a
thermoplastic varnish layer could diminish the waviness to the desired range below
10 (lw = 4).
Besides the experimental work a theoretical analysis of the consolidation and solidification
step was carried out. A finite element model has been created representing a
semi-finished sheet with four layers of a 2/2 twill textile reinforcement. Based on this
geometry various matrix characteristics as well as alterations of the global reinforcement
structure (more or less horizontal ply off-set) have been analysed.
The simulations supported the experimental results. They indicated the strong influence
of the matrix and showed that the off-set of the reinforcing layers plays an important
role concerning the resulting surface profile. Because the off-set of the plies
can not be controlled in the real material and therefore is at random, the profile
depths show a remarkable standard deviation (30 %). In the example considering a
2/2-twill reinforcement the optimum off-set could reduce the profile depth up to 40 %.
Furthermore, the influence of the process parameters (pressure and cooling rate)during the consolidation process was experimentally and theoretically investigated. In
addition to the non-isotropic characteristics of the textile, the time and temperature
dependent mechanical behaviour of the thermoplastic matrix had to be ascertained
and transferred into the model.
A rapid cooling rate was identified to reduce the surface profile of the substrate. The
profile depth of the simulated GF-PC could be decreased from 5 - 3 μm. However,
experimental tests concerning temperature changes and weathering showed that this
advantageous effect decreases with time due to the viscoelastic behaviour of the
polymer and resetting forces of the reinforcement.
The pressure can influence the texture phenomenon only by affecting the fibre volume
content of the sample. In case of static isobaric press processing a certain matrix
flow across the margins of the tool can not be totally averted. With a rising pressure the outflow becomes stronger and leads to a growing fibre volume content and
stronger surface waviness.
By carrying out several simulations with systematically varying material data a nomogram
could be created that represents a tool to predict the surface profile of comparable
composites (2/2 twill reinforcement, FVC around 50 %) just in dependence of
the matrix. It takes into account the specific matrix volume shrinkage and the pitch
from its solidification to usage temperature. Thus, the possibilities but also limitations
of a certain material combination concerning surface waviness can easily be estimated.
In order to reduce the heterogeneity of the fibre matrix distribution common textile
fabrics were substituted by unidirectional (UD) non-crimped structures and UD fabrics.
A newly established processing method was used to manufacture a noncrimped
and non-sewed endless fibre reinforced thermoplastic sheet by direct combination
of a multiaxial weft insertion machine and a continuous rotocure press. The
resulting product proved the potential for an improved surface quality. Despite the
use of relatively heavy rovings and not yet optimised fibre placement the surface profile
of this new kind of organic sheets is comparable with the one of those samples
having the fine 8-H-satin fabric reinforcement (lw = 20).
Finally it could be shown that the method of thermoplastic varnish layer lamination
which has successfully been used for semi-finished parts can also be integrated in a
thermoforming step to create three-dimensional components. The best results of this trial (lw = 10, sw = 14) do not reach the level of the flat sheets but almost meet the
requirements of the automotive “Class A” standard. With regard to economical and
weight saving aspects this material option can be considered a competitive alternative
to common car body panels.
In conclusion the investigations showed a notable feasibility to improve the surface
quality of endless fibre reinforced thermoplastic sheets. Therefore, this thesis represents
a contribution to amplify the application potential of this material class, particularly
in the fields of leisure and sports goods, and in the range of commercial vehicles.
Die Einmischung von Altgummipartikeln aus zerkleinerten Altreifen in Thermoplast-,
Elastomer- und Duromer-Matrizes im Sinne einer stofflichen Wiederverwertung führt
zu erheblichen Eigenschaftsverschlechterungen der altgummipartikelmodifizierten
Polymerblends. Vor diesem Hintergrund gewinnt die Modifizierung der Altgummipartikel
für eine Verbesserung der Verträglichkeit mit den Matrixmaterialien
zunehmend an Bedeutung.
Zur Modifizierung der Altgummipartikel wurden photochemische Pfropfungsreaktionen
mit Glycidylmethacrylat (GMA) und Methacrylsäure (MAA) nach einem
radikalischen Polymerisationsmechanismus durchgeführt.
Um Altgummipartikel erfolgreich chemisch modifizieren zu können, ist ein fundiertes
Wissen über die entscheidenden Parameter des Pfropfungsprozesses erforderlich.
So haben beispielsweise die Art und Konzentration der Pfropfungschemikalien wie
Monomer und Photoinitiator, die Art des Spülgases, die Temperatur sowie die
Bestrahlungszeit einen entscheidenden Einfluss auf das Pfropfungsergebnis. Der
Nachweis der Oberflächenmodifizierung erfolgte mit Hilfe chemischer Analytikmethoden
sowie mittels Kontaktwinkelmessungen.
Ein weiterer Schwerpunkt dieser Arbeit lag auf der Herstellung von altgummipartikelmodifizierten
Thermoplast-, Duromer- und Elastomer-Blends. Polyamid-6
(PA-6) und Polybutylenterephthalat (PBT) wurden als thermoplastische Matrixmaterialien
ausgewählt. Als Vertreter der Duromere wurde beispielhaft ein
Vinylester-Urethan-Hybridharz (VEUH) angewendet und als elastomeres
Matrixmaterial kam ein Polyurethan-Gießelastomer (PUR) zur Anwendung.
Bei höheren Gummipartikel-Konzentrationen zeigte sich, dass durch die Pfropfung
die Verträglichkeit zwischen Gummipartikeln und den o. g. Matrixmaterialien verbessert
wurde. Die Modifizierung von PA-6 und VEUH mit feinverteilten
Gummipartikeln bewirkte bei geringfügigen Einbußen an Festigkeit und Steifigkeit
deutliche Zähigkeitssteigerungen. Dieser Effekt war bei den GMA modifizierten
Gummipartikeln stärker ausgeprägt.
Bei der Anwendung von 10 Gew.% MAA gepfropften Gummipartikeln in PURElastomeren
konnten sehr gute mechanische Kennwerte erzielt werden. Damit
stellen altgummipartikelmodifizierte PUR-Blends eine interessante Recyclingoption für Altreifen und Altgummiabfälle dar.
The tape placement technique is of particular importance for the production of large
and weight optimized structural components especially in the aeronautic industry.
The components are produced independently of size and load directions by placing
single unidirectional fiber reinforced tapes automatically. Moreover, very large component
dimensions enable a reduction of joining processes.
In comparison to the thermoset tape placement, additional potentials can be set up
through the usage of thermoplastic semi-finished materials, as beside the high degree
of integration und the defined laminate construction less material specific problems
and a non-autoclave production can be realized. This thesis follows an allembracing
analyses and development of the thermoplastic tape placement process
to provide knowledge to overcome the deficits concerning semi-finished materials,
systems engineering and available models for the process description.
First, the process is described and differentiated. Within the scope of a strategic
process analyses, the potentials and strength of this process are worked out.
Through a succeeding operational process analyses, the process is pictured in detail
and further developments of the process and the control are made possible.
All aspects of the process in terms of quality of the semi-finished material, systems
engineering, process control, and quality assurance are considered for the process
development. Innovative concepts to solve the first layer problem and a new tape
placement head are worked out.
A new model is developed to support strategic decisions on basis of component specific
cycle times. A measure for the component shape complexity is derived and integrated
into a continuous approach. The model is based on the process physics and
can be applied to any component without a need for empiric data.
Finally, new process potentials are presented through a combination of thermoforming
and thermoplastic tape placement.
Styrene is most commonly used in Vinylester resins (VERs) and is the co-monomer
best described regarding VERs. However, there is little knowledge about the
influence of other co-monomers on properties of resins and castings. Because of
some unfavorable properties styrene provides in resins, e. g. the relatively low flash
point, public interest in the usage of styrene-free resins in chemically bonded anchors
has increased in the last couple of years.
To develop styrene-free VERs and to examine their qualifications when used in
chemically bonded anchors was one of the main purposes of this thesis. Properties
of several castings were examined and described and correlations between these
properties and those of co-monomers were investigated to find a pattern that would
allow facilitation for further examinations. One styrenated and seven styrene-free
resins were synthezised and compared to each other in several investigations.
Using these different co-monomers a great variety of fracture-mechanical and
mechanical properties of the castings can be achieved. Compared to the styrenecontaining
resin it is possible to get either higher, lower or equal strength, stiffness
and elongation. Castings containing HPMA and PEG200DMA proved to be of special
interest. VER/HPMA achieved highest results regarding modulus and strength.
Elongation was equal to that of the resin containing styrene. VER/PEG200DMA
showed the best results regarding elongation and had the lowest tensile modulus.
Tensile and flexural elongations were as high as those of the styrene reference
sytem.
Styrenefree systems showed a lower thermal resistance compared to the styrenated
resin and absorbed more water. There were significant differences in alkali
resistance as well. Only THFMA and PEG200DMA could deliver values similar to the
styrene system. The different amount of ester groups in the networks could not
explain these results but a correlation was found between residual strength and the
sum of hydroxy- and ester group concentrations.A method was deduced from these test results to allow assumptions on hydrophilicity
properties of castings by considering the molecular structure and the amount of comonomer
used.
Chemical bonding anchors containing the synthesised styrene-free resins were
produced. These showed high pull-out loads and little displacements under
permanent loading. Adhesive properties of the resins showed no direct correlation to
the bond strength of anchors. A tendency was found that resins with high stiffness
provide anchors with higher bond strength. Alkali resistance of the bonding material
was examined in slice tests. Even bonding materials containing resins that were
almost completely destroyed during a boiling test with NaOH showed good residual
strength here.
DSC-analysis of anchor grout samples collected from pulled out anchors showed low
glass transition temperature and locally inconsistent cure degrees. The possibility of
thermal postcure of anchor grouts after setting was examined to be able to better
compare the different systems when almost completely cured. Two methods were
considered: heating of the anchor rod using hot air and electromagnetic induction.
Based on a thermodynamical calculation model the heat loss proved to be high when
using hot air. Results of the induction method were promising, however. The degree
of cure and the glass transition temperature could be improved almost over the
complete embedment depth. A more homogenous network was achieved with a
reduced content of residuals and better chemical resistance.
Die Geschichte zeigt, dass der städtische öffentliche Raum schon immer ein Ort gewesen ist, der von vielseitigen Interaktionen lebt und von ihnen geformt wird. Besonders die Bildung von Öffentlichkeit und Urbanität entsteht durch ein Zusammenkommen von verschiedensten Austauchprozessen. Seit Aufkommen der digitalen Medien ist jedoch die Art der menschlichen Interaktion deutlich erweitert und komplexer geworden, sodass sie Befürchtungen auslösten, der reale öffentliche Raum verliere als Interaktionsort an Bedeutung. Unabhängigkeit von Ort und Zeit, entlokalisierte und individualisierte Zeitstrukturen zerfasern den Rhythmus der Stadt. Jene droht ungemütlicher und gefährlicher zu werden. Das Netz wurde zum neuen ‚öffentlicheren’ Raum im Sinne einer aktiven kritischen bürgerlichen Öffentlichkeit erhoben.
Mit der Mobilisierung der digitalen Technologien wird es jedoch möglich, zurück in den öffentlichen Raum zu gehen und sich die neuen Medien als kommunikationsfördernd, identitäts- und gemeinschaftsproduzierend zu Hilfe zu nehmen, um ein neues integrierendes und identitätsstiftendes Interaktionsfeld für eine demokratische Gesellschaft zu kreieren - im besonderen als Gegenentwicklung zur weiteren Kommerzialisierung und Reizüberfrachtung des öffentlichen Raums. Die interaktive Kunst mit ihrer Lebensnähe, den kommunikativen Ansätzen und dem reflektierenden Umgang mit den modernen Machttechnologien ist dementsprechend besonders prädestiniert, mit dem städtischen öffentlichen Raum verknüpft zu werden.
Ziel der Arbeit ist es nun, aus dem Feld der Interaktiven Kunst neue Ansätze für eine Wiederbelebung der Öffentlichkeitsfunktion des Stadtraumes aufzuzeigen, so zum Beispiel Katalysatoren für eine direkte Mensch-Mensch-Interaktion oder eine neue Art von Involvie- rung in die Gestaltung des öffentlichen Raumes. In seiner neuen Interaktivität kann der Raum selbst zu einer Art Austauschmedium werden.
Aus den theoretischen Überlegungen, den Fragebögen und der Analyse gesammelter interaktiver Projekte, die bewusst in den öffentlichen Raum gehen, haben sich schließlich folgende fünf Kategorien herauskristallisiert. Sie bilden Ansatzpunkte für einen Schritt in Richtung Realisierung eines zeitgemäßen Interaktionsfeldes.
• Interaktionsförderung zur angstfreien Konfrontation und zum Kontakt mit Fremden
• Förderung der Öffentlichkeitsbildung durch Kritik, Diskussion und Reflektion der Gesellschaft
• Förderung der sozialen Interaktion und Verortung in der lokalen Nachbarschaft
• Wahrnehmung der gesellschaftlichen Entwicklung durch Technologie reflektierende, sinnliche Systemerfahrung
• Aktivierung zur bewussten Teilnahme an der Gestaltung des öffentlichen Raums
Die Homepage, die sich aus der CD-Rom zur Diplomarbeit entwickelt hat, stellt diese interaktiven Medienprojekte vor. Sie verdeutlicht anhand der Analyse und Kategorisierung der Projekte, wie nun die Neuen Medien alternativ genutzt werden können, um zur Reaktivierung und positiven Veränderung des Stadtraumes beizutragen.
In einer offenen Liste können weitere Projekte eintragen werden. Mit der Zeit kann sich so ein umfangreiches Archiv entwickeln, mit Beispielen, die zu neuen Ansätzen im Umgang der Stadtplanung mit dem öffentlichen Raum anregen.
www.interactionfield.de
Congress Report 2002.12
(2002)
Congress Report 2002.11
(2002)
Congress Report 2002.10
(2002)
Congress Report 2002.09
(2002)
Congress Report 2002.08
(2002)
Congress Report 2002.06-07
(2002)
Congress Report 2002.05
(2002)
Congress Report 2002.04
(2002)
Congress Report 2002.03
(2002)
Congress Report 2002.02
(2002)
Congress Report 2002.01
(2002)
In der Arbeit sollen ausgewählte technische Indikatoren und deren Handelsstrategien hinsichtlich ihres Verhaltens bzw. ihrer Profitabilität in verschiedenen Marktphasen untersucht werden. Um das Argument, dass die Indikatoren selbst erfüllend sind, zu entkräften, werden Finanzzeitreihen simuliert und die Indikatoren auf diese angewendet und ausgewertet. Zu diesem Zweck wird zu gegebenen echten Kursdaten ein finanzzeitreihenanalytisches Modell angepasst. Dieses wird zur Simulation von Finanzzeitreihen und damit zur Auswertung der Indikatoren verwendet werden. Durch geeignete Auswahlverfahren sollen verschiedene Handelsstrategien zu Strategien kombiniert werden, um ein besseres Ertrag/Risikoverhältnis zu erreichen als dies bei einzelnen Strategien der Fall wäre.
Ähnlich wie Data-Mining die Analyse strukturierter numerischer Daten bezeichnet, beschreibt der Begriff des Text-Mining eine Menge von Methoden zur (halb-) automatischen Auswertung großer Mengen natürlichsprachlicher Texte. Das Gebiet des Text Mining umfaßt vielfältige Methoden zur Extraktion von Informationen aus natürlichsprachlichen Texten. In diesem Gebiet bzw. in dem Forschungsgebiet der Namenserkennung und Namensklassifikation werden viele Algorithmen vorgestellt und dokumentiert. Bei diesen Namenerkennungssystemen, die Teile der sogenannten "Information-Extraction-Systems" sind, werden hauptsächlich zwei Ansätze verwendet und zwar der sogenannte "Knowledge-Engineering-Approach" und "Automatic-Training-Approach"
Elementare Finanzmathematik
(2002)
Im Rahmen dieser Arbeit soll eine elementar gehaltene Einführung in die Aufgabenstellungen und Prinzipien der modernen Finanzmathematik gegeben werden. Insbesondere werden die Grundlagen der Modellierung von Aktienkursen, der Bewertung von Optionen und der Portfolio-Optimierung vorgestellt. Natürlich können die verwendeten Methoden und die entwickelte Theorie nicht in voller Allgemeinheit für den Schuluntericht verwendet werden, doch sollen einzelne Prinzipien so heraus gearbeitet werden, dass sie auch an einfachen Beispielen verstanden werden können.