Refine
Year of publication
Document Type
- Report (399) (remove)
Language
- English (399) (remove)
Keywords
- numerical upscaling (7)
- hub location (5)
- Elastoplastizität (4)
- Integer programming (4)
- modelling (4)
- poroelasticity (4)
- Darcy’s law (3)
- Dienstgüte (3)
- Elastic BVP (3)
- Elastoplasticity (3)
- Formalisierung (3)
- Heston model (3)
- Hysterese (3)
- Lagrangian mechanics (3)
- Mathematikunterricht (3)
- Modellierung (3)
- effective heat conductivity (3)
- facility location (3)
- non-Newtonian flow in porous media (3)
- polynomial algorithms (3)
- praxisorientiert (3)
- variational inequalities (3)
- virtual material design (3)
- American options (2)
- Bartlett spectrum (2)
- Chisel (2)
- Elastisches RWP (2)
- Elastoplastisches RWP (2)
- Field-programmable gate array (FPGA) (2)
- HJB equation (2)
- Heuristics (2)
- IMRT planning (2)
- Inverses Problem (2)
- Jiang's model (2)
- Jiang-Modell (2)
- Lineare Algebra (2)
- Logistics (2)
- MAC type grid (2)
- Noether’s theorem (2)
- Nonlinear multigrid (2)
- Portfolio optimisation (2)
- Ratenunabhängigkeit (2)
- Regularisierung (2)
- Rotational spinning process (2)
- Special Cosserat rods (2)
- Supply Chain Management (2)
- Variationsungleichungen (2)
- Wavelet (2)
- adaptive refinement (2)
- algorithmic game theory (2)
- asymptotic homogenization (2)
- branch and cut (2)
- discontinuous coefficients (2)
- discrete mechanics (2)
- domain decomposition (2)
- elastoplastic BVP (2)
- energy minimization (2)
- facets (2)
- fast Fourier transform (2)
- fiber orientation (2)
- fiber-fluid interaction (2)
- filling processes (2)
- finite volume method (2)
- free-surface phenomena (2)
- heuristic (2)
- hysteresis (2)
- image analysis (2)
- injection molding (2)
- integer programming (2)
- interface boundary conditions (2)
- linear algebra (2)
- linear elasticity (2)
- mathematical education (2)
- model reduction (2)
- multibody dynamics (2)
- multigrid (2)
- multilayered material (2)
- non-overlapping constraints (2)
- online optimization (2)
- option pricing (2)
- portfolio choice (2)
- power spectrum (2)
- praxis orientated (2)
- rectangular packing (2)
- simulation (2)
- single phase flow (2)
- software development (2)
- stochastic control (2)
- supply chain management (2)
- valid inequalities (2)
- work effort (2)
- (dynamic) network flows (1)
- 3D (1)
- 3d imaging (1)
- : Navier-Stokes equations (1)
- : multiple criteria optimization (1)
- : multiple objective programming (1)
- AG-RESY (1)
- Abstract linear systems theory (1)
- Ad-hoc-Netz (1)
- AmICA (1)
- Assigment (1)
- Asymptotic Expansion (1)
- Asymptotic homogenization (1)
- Automatic Differentiation (1)
- Automatische Differentiation (1)
- Bayesian Model Averaging (1)
- Bell Number (1)
- Berechnungskomplexität (1)
- Betriebsfestigkeit (1)
- Bingham viscoplastic model (1)
- Biot poroelasticity system (1)
- Biot-Savart Operator (1)
- Biot-Savart operator (1)
- Black–Scholes approach (1)
- Blocked Neural Networks (1)
- Boolean polynomials (1)
- Boundary Value Problem (1)
- Brinkman (1)
- Brinkman equations (1)
- CAD (1)
- CFD (1)
- CHAMP <Satellitenmission> (1)
- CIR model (1)
- Capacitated Hub Location (1)
- Capacity decisions (1)
- Code Inspection (1)
- Competitive Analysis (1)
- Compiler (1)
- Complexity theory (1)
- Constant Maturity Credit Default Swap (1)
- Constrained mechanical systems (1)
- Constraint Programming (1)
- Continuum mechanics (1)
- Convex sets (1)
- Coq (1)
- Core (1)
- Cosserat rod (1)
- Credit Default Swaption (1)
- Customer distribution (1)
- Decision support systems (1)
- Delaunay Triangulation (1)
- Delaunay mesh generation (1)
- Design (1)
- Differentialinklusionen (1)
- Discrete linear systems (1)
- Distortion measure (1)
- Domain Decomposition (1)
- Drahtloses Sensorsystem (1)
- Dynamic Network Flows (1)
- Dynamical Coupling (1)
- Education (1)
- Elastoplastic BVP (1)
- Electrophysiology (1)
- Equicofactor matrix polynomials (1)
- Euler number (1)
- Eulerian-Lagrangian formulation (1)
- Existence of Solutions (1)
- Extraction (1)
- FETI (1)
- FPM (1)
- FPTAS (1)
- Facility location (1)
- Fault Prediction (1)
- Filippov theory (1)
- Filippov-Theorie (1)
- Filtering (1)
- Financial Mathematics (1)
- Finite rotations (1)
- Flexible multibody dynamics (1)
- Flooding (1)
- FlowLoc (1)
- Fluid Structure Interaction (1)
- Fokker-Planck Equation (1)
- Fokker-Planck equations (1)
- Folgar-Tucker equation (1)
- Folgar-Tucker model (1)
- Formal Semantics (1)
- Front Propagation (1)
- Fräsen (1)
- Funknetz (1)
- G2++ model (1)
- Generalized LBE (1)
- Geographical Information Systems (1)
- Geomagnetic Field Modelling (1)
- Geomagnetismus (1)
- Geomathematik (1)
- Geometric (1)
- Geostrophic flow (1)
- Gradual Covering (1)
- Gravimetrie (1)
- Greedy Heuristic (1)
- Green’s function (1)
- Grid Generation (1)
- Gröber basis (1)
- HJM (1)
- Hals-Nasen-Ohren-Chirurgie (1)
- Hals-Nasen-Ohren-Heilkunde (1)
- Hankel matrix (1)
- Hardware Description Langauge (HDL) (1)
- Hardware Description Language (HDL) (1)
- Hedge funds (1)
- Helmholtz-Decomposition (1)
- Helmholtz-Zerlegung (1)
- Heston Model (1)
- Heuristic (1)
- Home Health Care (1)
- Homotopie (1)
- Homotopiehochhebungen (1)
- Homotopy (1)
- Homotopy lifting (1)
- Hub Location (1)
- Hub-and-Spoke-System (1)
- Hull White model (1)
- Human resource modeling (1)
- Hysteresis (1)
- Hörgerät (1)
- IMRT planning on adaptive volume structures – a significant advance of computational complexity (1)
- Implantation (1)
- Incompressible Navier-Stokes equations (1)
- Infiltration (1)
- Injectivity of mappings (1)
- Injektivität von Abbildungen (1)
- Inkorrekt gestelltes Problem (1)
- Investigation (1)
- Isabelle/HOL (1)
- Iterative learning control (1)
- Jiang's constitutive model (1)
- Jiangsches konstitutives Gesetz (1)
- Jiang’s Model of Elastoplasticity (1)
- Kaktusgraph (1)
- Kalman Filter (1)
- Kirchhoff and Cosserat rods (1)
- Kirchhoff\\\'s geometrically theory (1)
- Knowledge Extraction (1)
- Kommunikationsprotokoll (1)
- Komplexitätsklasse NP (1)
- Kontinuumsmechanik (1)
- Konvexe Mengen (1)
- LIBOR market model (1)
- Lagrange formalism (1)
- Large deformations (1)
- Lattice Boltzmann (1)
- Lattice Boltzmann method (1)
- Lattice Boltzmann methods (1)
- Lattice Boltzmann models (1)
- Lattice-Boltzmann method (1)
- Least squares approximation (1)
- Level Set method (1)
- Li Ion Batteries (1)
- Linear Programming (1)
- Linear kinematic hardening (1)
- Linear kinematische Verfestigung (1)
- Lineare Optimierung (1)
- Liquid Polymer Moulding (1)
- Load Balancing (1)
- Locational Planning (1)
- MBS simulation (1)
- MILP formulations (1)
- MIP formulations (1)
- Mapping (1)
- Mastoid (1)
- Mastoidektomie (1)
- Mathematical modeling (1)
- Matrix perturbation theory (1)
- Melt spinning (1)
- Mesh-less methods (1)
- Meshfree Method (1)
- Meshfree method (1)
- Metaheuristics (1)
- Methode der Fundamentallösungen (1)
- Mie-Darstellung (1)
- Mie-Representation (1)
- Model Checking (1)
- Model reduction (1)
- Modeling (1)
- Modelling (1)
- Monte Carlo methods (1)
- Monte-Carlo methods (1)
- Multi-dimensional systems (1)
- Multibody simulation (1)
- Multicriteria decision making (1)
- Multipoint flux approximation (1)
- Multiscale problem (1)
- Multiscale problems (1)
- Multiscale structures (1)
- NP-hard (1)
- Nash equilibria (1)
- Navier-Stokes (1)
- Navier-Stokes equation (1)
- Navier-Stokes-Brinkmann system of equations (1)
- Network Location (1)
- Network design (1)
- Networks (1)
- Neumann problem (1)
- Nichtlineare/große Verformungen (1)
- Node Platform Design (1)
- Non-Newtonian flow (1)
- Non-homogeneous Poisson Process (1)
- Nonequilibrium Thermodynamics (1)
- Nonlinear Regression (1)
- Nonlinear energy (1)
- Nonlinear/large deformations (1)
- Numerical modeling (1)
- OCL 2.0 (1)
- Ohrenchirurgie (1)
- One-dimensional systems (1)
- Online Algorithms (1)
- Optimal parameter estimation (1)
- Optimization (1)
- Option pricing (1)
- Ordered Median Function (1)
- Ornstein-Uhlenbeck Process (1)
- Parallel Programming (1)
- Parameter Identification (1)
- Parameter identification (1)
- Parameteridentifikation (1)
- Parametrisation of rotations (1)
- Parsimonious Heston Model (1)
- Parteto surface (1)
- Particle scheme (1)
- Peer-to-Peer-Netz (1)
- Performance of iterative solvers (1)
- Pleated Filter (1)
- Poisson line process (1)
- Poroelastizität (1)
- Preconditioners (1)
- Profiles (1)
- Projection method (1)
- Pseudopolynomial-Time Algorithm (1)
- Quanto option (1)
- RONAF (1)
- Random set (1)
- Rate-independency (1)
- Realization theory (1)
- Recycling (1)
- Regelung (1)
- Reliability Prediction (1)
- Reservierungsprotokoll (1)
- Restricted Shortest Path (1)
- Ripley’s K function (1)
- Roboter (1)
- Rosenbrock methods (1)
- Rotational Fiber Spinning (1)
- Rounding (1)
- Route Planning (1)
- Routing (1)
- SAW filters (1)
- SDL (1)
- SDL-2000 (1)
- SGG (1)
- SIMPLE (1)
- SST (1)
- Satellitengradiometrie (1)
- Schädelchirurgie (1)
- Sensitivitäten (1)
- Shapley Value (1)
- Shapley value (1)
- Shapleywert (1)
- Sheet ofPaper (1)
- Simplex (1)
- Simulation (1)
- Slender body theory (1)
- Solid-Gas Separation (1)
- Solid-Liquid Separation (1)
- Spezifikation (1)
- Spieltheorie (1)
- Sprachprofile (1)
- Standortplanung (1)
- Stationary heat equation (1)
- Stein equation (1)
- Stochastic Differential Equations (1)
- Stokes-Brinkman equations (1)
- Stop- and Play-Operators (1)
- Stop- und Play-Operator (1)
- Stop-und Play-Operator (1)
- Stress-strain correction (1)
- Stücklisten (1)
- Supply Chain Design (1)
- Switching regression model (1)
- System Abstractions (1)
- Theorie schwacher Lösungen (1)
- Thermal Transport (1)
- Train Rearrangement (1)
- Translation Validation (1)
- UML 2 (1)
- UML Profile (1)
- Unstructured Grid (1)
- VCG payment scheme (1)
- VHDL (1)
- Variational inequalities (1)
- Variationsungleichugen (1)
- Vasicek model (1)
- Vectorial Wavelets (1)
- Vektor-Wavelets (1)
- Vektorkugelfunktionen (1)
- Vektorwavelets (1)
- Viscous Fibers (1)
- Winner Determination Problem (WDP) (1)
- Wireless Communication (1)
- Wireless Sensor Network (1)
- Wireless sensor network (1)
- a posteriori error estimates (1)
- a-priori domain decomposition (1)
- acoustic absorption (1)
- adaptive local refinement (1)
- adaptive triangulation (1)
- additive outlier (1)
- aerodynamic drag (1)
- air drag (1)
- algebraic constraints (1)
- algebraic cryptoanalysis (1)
- algorithm by Bortfeld and Boyer (1)
- aliasing (1)
- anisotropic cicosity (1)
- anisotropy (1)
- applied mathematics (1)
- artial differential algebraic equations (1)
- asymptotic (1)
- asymptotic Cosserat models (1)
- asymptotic limits (1)
- automated analog circuit design (1)
- automatic differentiation (1)
- autoregressive process (1)
- basic systems theoretic properties (1)
- batch presorting problem (1)
- battery modeling (1)
- bedingte Aktionen (1)
- behavioral modeling (1)
- ber dynamics (1)
- big triangle small triangle method (1)
- bills of materials (1)
- bin coloring (1)
- binarization (1)
- boudary condistions (1)
- bounce-back rule (1)
- boundary value problems (1)
- bounds (1)
- cactus graph (1)
- calibration (1)
- calls (1)
- cell volume (1)
- change analysis (1)
- circuit sizing (1)
- cliquet options (1)
- clustering (1)
- clustering and disaggregation techniques (1)
- combinatorial procurement (1)
- competetive analysis (1)
- competitive analysis (1)
- compiler (1)
- complexity (1)
- composite materials (1)
- computational fluid dynamics (1)
- computer algebra (1)
- concentrated electrolyte (1)
- constrained mechanical systems (1)
- constraint propagation (1)
- consumption (1)
- contact problems (1)
- continuous optimization (1)
- controlling (1)
- convergence of approximate solution (1)
- convex (1)
- convex optimization (1)
- cooperative game (1)
- core (1)
- corre- lation (1)
- correlation (1)
- coupled flow in plain and porous media (1)
- credit risk (1)
- credit spread (1)
- cuboidal lattice (1)
- curved viscous fibers (1)
- curved viscous fibers with surface tension (1)
- decision support systems (1)
- decomposition (1)
- defect detection (1)
- deformable bodies (1)
- deformable porous media (1)
- delay management (1)
- design centering (1)
- design optimization (1)
- deterministic technical systems (1)
- dial-a-ride (1)
- dif (1)
- differential algebraic equations (1)
- differential inclusions (1)
- differentialalgebraic equations (1)
- discrete facility location (1)
- discrete location (1)
- discrete optimization (1)
- discrete time setting (1)
- discretisation of control problems (1)
- discriminant analysis (1)
- diusion limits (1)
- dividend discount model (1)
- dividends (1)
- domains (1)
- drag models (1)
- drift due to noise (1)
- durability (1)
- dynamic capillary pressure (1)
- dynamic mode (1)
- dynamic network flows (1)
- earliest arrival flows (1)
- effective elastic moduli (1)
- effective thermal conductivity (1)
- efficient set (1)
- eigenvalue problems (1)
- elastoplasticity (1)
- electrochemical diusive processes (1)
- electrochemical simulation (1)
- electronic circuit design (1)
- elliptic equation (1)
- encapsulation (1)
- energy conservation (1)
- error estimates (1)
- estimation of compression (1)
- evolutionary algorithms (1)
- executive compensation (1)
- executive stockholder (1)
- expert system (1)
- explicit jump (1)
- explicit jump immersed interface method (1)
- exponential utility (1)
- extreme equilibria (1)
- extreme solutions (1)
- fatigue (1)
- fiber dynamics (1)
- fiber model (1)
- fiber-fluid interactions (1)
- fiber-turbulence interaction scales (1)
- fibrous insulation materials (1)
- fibrous materials (1)
- film casting process (1)
- filtration (1)
- financial decisions (1)
- finite difference discretization (1)
- finite differences (1)
- finite element method (1)
- finite elements (1)
- finite sample breakdown point (1)
- finite volume discretization (1)
- finite volume discretization discretization (1)
- finite volume discretizations (1)
- finite volume methods (1)
- finite-volume method (1)
- flexible fibers (1)
- flow in heterogeneous porous media (1)
- flow in porous media (1)
- flow resistivity (1)
- fluid-fiber interactions (1)
- fluid-structure interaction (1)
- force-based simulation (1)
- formal verification (1)
- forward starting options (1)
- fptas (1)
- frameindifference (1)
- free boundary value problem (1)
- free surface (1)
- free surface Stokes flow (1)
- full vehicle model (1)
- functional Hilbert space (1)
- fuzzy logic (1)
- general semi-infinite optimization (1)
- generalized Pareto distribution (1)
- genetic algorithms (1)
- geographical information systems (1)
- geomathematics (1)
- geometrically exact rod models (1)
- geometrically exact rods (1)
- glass processing (1)
- global optimization (1)
- global robustness (1)
- graph laplacian (1)
- guarded actions (1)
- harmonic density (1)
- harmonische Dichte (1)
- heterogeneous porous media (1)
- heuristics (1)
- hierarchical shape functions (1)
- human factors (1)
- human visual system (1)
- hydraulics (1)
- hyperealstic (1)
- image processing (1)
- image segmentation (1)
- impinging jets (1)
- improving and feasible directions (1)
- in-house hospital transportation (1)
- incompressible flow (1)
- inertial and viscous-inertial fiber regimes (1)
- innovation outlier (1)
- integral constitutive equation (1)
- intensity maps (1)
- intensity modulated (1)
- intensity modulated radiotherapy planning (1)
- interactive multi-objective optimization (1)
- interactive navigation (1)
- interfa (1)
- interface problem (1)
- interface problems (1)
- invariants (1)
- ion transport (1)
- isotropy test (1)
- kernel estimate (1)
- kernel function (1)
- kinetic derivation (1)
- knowledge management (1)
- knowledge representation (1)
- kooperative Spieltheorie (1)
- large scale optimization (1)
- lattice Boltzmann equation (1)
- learning curve (1)
- level-set (1)
- lid-driven flow in a (1)
- linear elasticity equations (1)
- linear kinematic hardening (1)
- linear optimization (1)
- liquid composite moulding (1)
- liquid film (1)
- lithium-ion battery (1)
- local approximation of sea surface topography (1)
- local robustness (1)
- locally supported (Green’s) vector wavelets (1)
- locally supported wavelets (1)
- location theory (1)
- log utility (1)
- logistic regression (1)
- logistics (1)
- long slender fibers (1)
- macro modeling (1)
- macroscopic equations (1)
- magnetic field (1)
- mass & spring (1)
- mastoid (1)
- mastoidectomy (1)
- mechanism design (1)
- metal foams (1)
- method of fundamental solutions (1)
- microstructure simulatio (1)
- microstructure simulation (1)
- minimaler Schnittbaum (1)
- minimum cut tree (1)
- models (1)
- modified gradient projection method (1)
- moment matching (1)
- multi-asset (1)
- multi-period planning (1)
- multi-stage stochastic programming (1)
- multibody system simulation (1)
- multicriteria optimization (1)
- multigrid methods (1)
- multiobjective evolutionary algorithms (1)
- multiphase flow (1)
- multiple objective optimization (1)
- multiscale problem (1)
- multiscale problems (1)
- multiscale structures (1)
- multivalued fundamental diagram (1)
- nearest neighbour distance (1)
- neighborhod relationships (1)
- network congestion game (1)
- neural network (1)
- non-Newtonian fluids (1)
- non-linear optimization (1)
- non-linear wealth dynamics (1)
- non-local conditions (1)
- non-woven (1)
- nonlinear programming (1)
- nonlinear stochastic systems (1)
- nonlinearity (1)
- nonparametric regression (1)
- numerical simulation (1)
- numerical solution (1)
- object-orientation (1)
- occupational choice (1)
- oil filters (1)
- on-board simulation (1)
- open cell foam (1)
- operator-dependent prolongation (1)
- optimal control (1)
- optimal control theory (1)
- optimal portfolio choice (1)
- optimization (1)
- optimization algorithms (1)
- optimization strategies (1)
- options (1)
- ordered median (1)
- orientation analysis (1)
- orthogonal orientations (1)
- oscillating coefficients (1)
- otorhinolaryngological surgery (1)
- ownership (1)
- pH-sensitive microelectrodes (1)
- paper machine (1)
- parallel computing (1)
- parallel implementation (1)
- particle methods (1)
- path-connected sublevelsets (1)
- permeability of fractured porous media (1)
- phase space (1)
- phase transitions (1)
- piezoelectric periodic surface acoustic wave filters (1)
- planar location (1)
- polar ice (1)
- political districting (1)
- porous media (1)
- porous microstructure (1)
- power utility (1)
- preconditioner (1)
- pressing section of a paper machine (1)
- price of anarchy (1)
- price of stability (1)
- productivity (1)
- project management and scheduling (1)
- projection-type splitting (1)
- pseudo-plastic fluids (1)
- public transit (1)
- public transport (1)
- public transportation (1)
- puts (1)
- quadratic assignment problem (1)
- quantile estimation (1)
- quasistatic deformations (1)
- quickest path (1)
- radiation therapy planning (1)
- radiotherapy planning (1)
- random -Gaussian aerodynamic force (1)
- random set (1)
- random system of fibers (1)
- rate-independency (1)
- rate-indepenhysteresis (1)
- real-life applications. (1)
- real-time (1)
- real-time simulation (1)
- real-world accident data (1)
- regularization (1)
- regularized models (1)
- representative systems of Pareto solutions (1)
- reproducing kernel (1)
- risk (1)
- robust network flows (1)
- robustness (1)
- rotational spinning processes (1)
- safety critical components (1)
- safety function (1)
- sales territory alignment (1)
- satisfiability (1)
- selfish routing (1)
- semi-infinite programming (1)
- sensitivities (1)
- sequences (1)
- sequential test (1)
- series-parallel graphs (1)
- shape (1)
- shape optimization (1)
- simplex (1)
- single layer kernel (1)
- singularity (1)
- slender- body theory (1)
- slender-body theory (1)
- slenderbody theory (1)
- smoothness (1)
- software process (1)
- spherical decomposition (1)
- spinning processes (1)
- stability (1)
- statistical modeling (1)
- steady Richards’ equation (1)
- steady modified Richards’ equation (1)
- stochastic Hamiltonian system (1)
- stochastic averaging. (1)
- stochastic dif (1)
- stochastic volatility (1)
- stokes (1)
- stop and go waves (1)
- stop- and play-operator (1)
- stop- and play-operators (1)
- strategic (1)
- strength (1)
- strong equilibria (1)
- strut thickness (1)
- subgrid approach (1)
- subgrid approximation (1)
- suspension (1)
- swap (1)
- symbolic analysis (1)
- synchrone Sprachen (1)
- synchronous languages (1)
- system simulation (1)
- tabu search (1)
- technology (1)
- territory desgin (1)
- textile quality control (1)
- texture classification (1)
- theorem prover (1)
- thin films (1)
- topological sensitivity (1)
- topology optimization (1)
- total latency (1)
- tr (1)
- trace stability (1)
- traffic flow (1)
- transfer quality (1)
- translation validation (1)
- transportation (1)
- tree method (1)
- turbulence modeling (1)
- turbulence modelling (1)
- two-grid algorithm (1)
- two-way coupling (1)
- types (1)
- unstructured grid (1)
- upscaling (1)
- urban elevation (1)
- variable aggregation method (1)
- variable neighborhood search (1)
- variational formulation (1)
- vector spherical harmonics (1)
- vectorial wavelets (1)
- viscous thermal jets (1)
- visual (1)
- visual interfaces (1)
- visualization (1)
- volatility (1)
- volume of fluid method (1)
- wave propagation (1)
- weak solution theory (1)
- weakly/ strictly pareto optima (1)
- white noise (1)
- wild bootstrap test (1)
Faculty / Organisational entity
In this work, we analyze two important and simple models of short rates, namely Vasicek and CIR models. The models are described and then the sensitivity of the models with respect to changes in the parameters are studied. Finally, we give the results for the estimation of the model parameters by using two different ways.
Algebraic Systems Theory
(2004)
Control systems are usually described by differential equations, but their properties of interest are most naturally expressed in terms of the system trajectories, i.e., the set of all solutions to the equations. This is the central idea behind the so-called "behavioral approach" to systems and control theory. On the other hand, the manipulation of linear systems of differential equations can be formalized using algebra, more precisely, module theory and homological methods ("algebraic analysis"). The relationship between modules and systems is very rich, in fact, it is a categorical duality in many cases of practical interest. This leads to algebraic characterizations of structural systems properties such as autonomy, controllability, and observability. The aim of these lecture notes is to investigate this module-system correspondence. Particular emphasis is put on the application areas of one-dimensional rational systems (linear ODE with rational coefficients), and multi-dimensional constant systems (linear PDE with constant coefficients).
In this paper mathematical models for liquid films generated by impinging jets are discussed. Attention is stressed to the interaction of the liquid film with some obstacle. S. G. Taylor [Proc. R. Soc. London Ser. A 253, 313 (1959)] found that the liquid film generated by impinging jets is very sensitive to properties of the wire which was used as an obstacle. The aim of this presentation is to propose a modification of the Taylor's model, which allows to simulate the film shape in cases, when the angle between jets is different from 180°. Numerical results obtained by discussed models give two different shapes of the liquid film similar as in Taylors experiments. These two shapes depend on the regime: either droplets are produced close to the obstacle or not. The difference between two regimes becomes larger if the angle between jets decreases. Existence of such two regimes can be very essential for some applications of impinging jets, if the generated liquid film can have a contact with obstacles.
Granular systems in solid-like state exhibit properties like stiffness
dependence on stress, dilatancy, yield or incremental non-linearity
that can be described within the continuum mechanical framework.
Different constitutive models have been proposed in the literature either based on relations between some components of the stress tensor or on a quasi-elastic description. After a brief description of these
models, the hyperelastic law recently proposed by Jiang and Liu [1]
will be investigated. In this framework, the stress-strain relation is
derived from an elastic strain energy density where the stable proper-
ties are linked to a Drucker-Prager yield criteria. Further, a numerical method based on the finite element discretization and Newton-
Raphson iterations is presented to solve the force balance equation.
The 2D numerical examples presented in this work show that the stress
distributions can be computed not only for triangular domains, as previoulsy done in the literature, but also for more complex geometries.
If the slope of the heap is greater than a critical value, numerical instabilities appear and no elastic solution can be found, as predicted by
the theory. As main result, the dependence of the material parameter
Xi on the maximum angle of repose is established.
Wireless LANs operating within unlicensed frequency bands require random access schemes such as CSMA/ CA, so that wireless networks from different administrative domains (for example wireless community networks) may co-exist without central coordination, even when they happen to operate on the same radio channel. Yet, it is evident that this Jack of coordination leads to an inevitable loss in efficiency due to contention on the MAC layer. The interesting question is, which efficiency may be gained by adding coordination to existing, unrelated wireless networks, for example by self-organization. In this paper, we present a methodology based on a mathematical programming formulation to determine the
parameters (assignment of stations to access points, signal strengths and channel assignment of both access points and stations) for a scenario of co-existing CSMA/ CA-based wireless networks, such that the contention between these networks is minimized. We demonstrate how it is possible to solve this discrete, non-linear optimization problem exactly for small
problems. For larger scenarios, we present a genetic algorithm specifically tuned for finding near-optimal solutions, and compare its results to theoretical lower bounds. Overall, we provide a benchmark on the minimum contention problem for coordination mechanisms in CSMA/CA-based wireless networks.
Radiotherapy is one of the major forms in cancer treatment. The patient is irradiated with high-energetic photons or charged particles with the primary goal of delivering sufficiently high doses to the tumor tissue while simultaneously sparing the surrounding healthy tissue. The inverse search for the treatment plan giving the desired dose distribution is done by means of numerical optimization [11, Chapters 3-5]. For this purpose, the aspects of dose quality in the tissue are modeled as criterion functions, whose mathematical properties also affect the type of the corresponding optimization problem. Clinical practice makes frequent use of criteria that incorporate volumetric and spatial information about the shape of the dose distribution. The resulting optimization problems are of global type by empirical knowledge and typically computed with generic global solver concepts, see for example [16]. The development of good global solvers to compute radiotherapy optimization problems is an important topic of research in this application, however, the structural properties of the underlying criterion functions are typically not taken into account in this context.
On the Complexity of the Uncapacitated Single Allocation p-Hub Median Problem with Equal Weights
(2007)
The Super-Peer Selection Problem is an optimization problem in network topology construction. It may be cast as a special case of a Hub Location Problem, more exactly an Uncapacitated Single Allocation p-Hub Median Problem with equal weights. We show that this problem is still NP-hard by reduction from Max Clique.
This report reviews selected image binarization and segmentation methods that have been proposed and which are suitable for the processing of volume images. The focus is on thresholding, region growing, and shape–based methods. Rather than trying to give a complete overview of the field, we review the original ideas and concepts of selected methods, because we believe this information to be important for judging when and under what circumstances a segmentation algorithm can be expected to work properly.
We consider a volume maximization problem arising in gemstone cutting industry. The problem is formulated as a general semi-infinite program (GSIP) and solved using an interiorpoint method developed by Stein. It is shown, that the convexity assumption needed for the convergence of the algorithm can be satisfied by appropriate modelling. Clustering techniques are used to reduce the number of container constraints, which is necessary to make the subproblems practically tractable. An iterative process consisting of GSIP optimization and adaptive refinement steps is then employed to obtain an optimal solution which is also feasible for the original problem. Some numerical results based on realworld data are also presented.
Wireless sensor networks are the driving force behind many popular and interdisciplinary research areas, such as environmental monitoring, building automation, healthcare and assisted living applications. Requirements like compactness, high integration of sensors, flexibility, and power efficiency are often very different and cannot be fulfilled by state-of-the-art node platforms at once. In this paper, we present and analyze AmICA: a flexible, compact, easy-to-program, and low-power node platform. Developed from scratch and including a node, a basic communication protocol, and a debugging toolkit, it assists in an user-friendly rapid application development. The general purpose nature of AmICA was evaluated in two practical applications with diametric requirements. Our analysis shows that AmICA nodes are 67% smaller than BTnodes, have five times more sensors than Mica2Dot and consume 72% less energy than the state-of-the-art TelosB mote in sleep mode.
The stationary heat equation is solved with periodic boundary conditions in geometrically complex composite materials with high contrast in the thermal conductivities of the individual phases. This is achieved by harmonic averaging and explicitly introducing the jumps across the material interfaces as additional variables. The continuity of the heat flux yields the needed extra equations for these variables. A Schur-complent formulation for the new variables is derived that is solved using the FFT and BiCGStab methods. The EJ-HEAT solver is given as a 3-page Matlab program in the Appendix. The C++ implementation is used for material design studies. It solves 3-dimensional problems with around 190 Mio variables on a 64-bit AMD Opteron desktop system in less than 6 GB memory and in minutes to hours, depending on the contrast and required accuracy. The approach may also be used to compute effective electric conductivities because they are governed by the stationary heat equation.
Four aspects are important in the design of hydraulic lters. We distinguish between two cost factors and two performance factors. Regarding performance, filter eciencynd lter capacity are of interest. Regarding cost, there are production considerations such as spatial restrictions, material cost and the cost of manufacturing the lter. The second type of cost is the operation cost, namely the pressure drop. Albeit simulations should and will ultimately deal with all 4 aspects, for the moment our work is focused on cost. The PleatGeo Module generates three-dimensional computer models of a single pleat of a hydraulic lter interactively. PleatDict computes the pressure drop that will result for the particular design by direct numerical simulation. The evaluation of a new pleat design takes only a few hours on a standard PC compared to days or weeks used for manufacturing and testing a new prototype of a hydraulic lter. The design parameters are the shape of the pleat, the permeabilities of one or several layers of lter media and the geometry of a supporting netting structure that is used to keep the out ow area open. Besides the underlying structure generation and CFD technology, we present some trends regarding the dependence of pressure drop on design parameters that can serve as guide lines for the design of hydraulic lters. Compared to earlier two-dimensional models, the three-dimensional models can include a support structure.
A fully automatic procedure is proposed to rapidly compute the permeability of porous materials from their binarized microstructure. The discretization is a simplified version of Peskin’s Immersed Boundary Method, where the forces are applied at the no-slip grid points. As needed for the computation of permeability, steady flows at zero Reynolds number are considered. Short run-times are achieved by eliminating the pressure and velocity variables using an Fast Fourier Transform-based and 4 Poisson problembased fast inversion approach on rectangular parallelepipeds with periodic boundary conditions. In reference to calling it a fast method using fictitious or artificial forces, the implementation is called FFF-Stokes. Large scale computations on 3d images are quickly and automatically performed to estimate the permeability of some sample materials. A matlab implementation is provided to allow readers to experience the automation and speed of the method for realistic three-dimensional models.
This report presents a generalization of tensor-product B-spline surfaces. The new scheme permits knots whose endpoints lie in the interior of the domain rectangle of a surface. This allows local refinement of the knot structure for approximation purposes as well as modeling surfaces with local tangent or curvature discontinuities. The surfaces are represented in terms of B-spline basis functions, ensuring affine invariance, local control, the convex hull property, and evaluation by de Boor's algorithm. A dimension formula for a class of generalized tensor-product spline spaces is developed.
In the presented work, we make use of the strong reciprocity between kinematics and geometry to build a geometrically nonlinear, shearable low order discrete shell model of Cosserat type defined on triangular meshes, from which we deduce a rotation–free Kirchhoff type model with the triangle vertex positions as degrees of freedom. Both models behave physically plausible already on very coarse meshes, and show good
convergence properties on regular meshes. Moreover, from the theoretical side, this deduction provides a
common geometric framework for several existing models.
In this article we present a method to generate random objects from a large variety of combinatorial classes according to a given distribution. Given a description of the combinatorial class and a set of sample data our method will provide an algorithm that generates objects of size n in worst-case runtime O(n^2) (O(n log(n)) can be achieved at the cost of a higher average-case runtime), with the generated objects following a distribution that closely matches the distribution of the sample data.
We present a methodology to augment system safety step-by-step and illustrate the approach by the definition of reusable solutions for the detection of fail-silent nodes - a watchdog and a heartbeat. These solutions can be added to real-time system designs, to protect against certain types of system failures. We use SDL as a system design language for the development of distributed systems, including real-time systems.
Interactive graphics has been limited to simple direct illumination that commonly results in an artificial appearance. A more realistic appearance by simulating global illumination effects has been too costly to compute at interactive rates. In this paper we describe a new Monte Carlo-based global illumination algorithm. It achieves performance of up to 10 frames per second while arbitrary changes to the scene may be applied interactively. The performance is obtained through the effective use of a fast, distributed ray-tracing engine as well as a new interleaved sampling technique for parallel Monte Carlo simulation. A new filtering step in combination with correlated sampling avoids the disturbing noise artifacts common to Monte Carlo methods.
Worldwide the installed capacity of renewable technologies for electricity production is
rising tremendously. The German market is particularly progressive and its regulatory
rules imply that production from renewables is decoupled from market prices and electricity
demand. Conventional generation technologies are to cover the residual demand
(defined as total demand minus production from renewables) but set the price at the
exchange. Existing electricity price models do not account for the new risks introduced
by the volatile production of renewables and their effects on the conventional demand
curve. A model for residual demand is proposed, which is used as an extension of
supply/demand electricity price models to account for renewable infeed in the market.
Infeed from wind and solar (photovoltaics) is modeled explicitly and withdrawn from
total demand. The methodology separates the impact of weather and capacity. Efficiency
is transformed on the real line using the logit-transformation and modeled as a stochastic process. Installed capacity is assumed a deterministic function of time. In a case study the residual demand model is applied to the German day-ahead market
using a supply/demand model with a deterministic supply-side representation. Price trajectories are simulated and the results are compared to market future and option
prices. The trajectories show typical features seen in market prices in recent years and the model is able to closely reproduce the structure and magnitude of market prices.
Using the simulated prices it is found that renewable infeed increases the volatility of forward prices in times of low demand, but can reduce volatility in peak hours. Prices
for different scenarios of installed wind and solar capacity are compared and the meritorder effect of increased wind and solar capacity is calculated. It is found that wind
has a stronger overall effect than solar, but both are even in peak hours.
Continuously improving imaging technologies allow to capture the complex spatial
geometry of particles. Consequently, methods to characterize their three
dimensional shapes must become more sophisticated, too. Our contribution to
the geometric analysis of particles based on 3d image data is to unambiguously
generalize size and shape descriptors used in 2d particle analysis to the spatial
setting.
While being defined and meaningful for arbitrary particles, the characteristics
were actually selected motivated by the application to technical cleanliness. Residual
dirt particles can seriously harm mechanical components in vehicles, machines,
or medical instruments. 3d geometric characterization based on micro-computed
tomography allows to detect dangerous particles reliably and with
high throughput. It thus enables intervention within the production line. Analogously
to the commonly agreed standards for the two dimensional case, we
show how to classify 3d particles as granules, chips and fibers on the basis of
the chosen characteristics. The application to 3d image data of dirt particles is
demonstrated.
There is a well known relationship between alternating automata on finite words and symbolically represented nondeterministic automata on finite words. This relationship is of practical relevance because it allows to combine the advantages of alternating and symbolically represented nondeterministic automata on finite words. However, for infinite words the situation is unclear. Therefore, this work investigates the relationship between alternating omega-automata and symbolically represented nondeterministic omega-automata. Thereby, we identify classes of alternating omega-automata that are as expressive as safety, liveness and deterministic prefix automata, respectively. Moreover, some very simple symbolic nondeterminisation procedures are developed for the classes corresponding to safety and liveness properties.
We present the application of a meshfree method for simulations of interaction between fluids and flexible structures. As a flexible structure we consider a sheet of paper. In a two-dimensional framework this sheet can be modeled as curve by the dynamical Kirchhoff-Love theory. The external forces taken into account are gravitation and the pressure difference between upper and lower surface of the sheet. This pressure difference is computed using the Finite Pointset Method (FPM) for the incompressible Navier-Stokes equations. FPM is a meshfree, Lagrangian particle method. The dynamics of the sheet are computed by a finite difference method. We show the suitability of the meshfree method for simulations of fluid-structure interaction in several applications.
A Lattice Boltzmann Method for immiscible multiphase flow simulations using the Level Set Method
(2008)
We consider the lattice Boltzmann method for immiscible multiphase flow simulations. Classical lattice Boltzmann methods for this problem, e.g. the colour gradient method or the free energy approach, can only be applied when density and viscosity ratios are small. Moreover, they use additional fields defined on the whole domain to describe the different phases and model phase separation by special interactions at each node. In contrast, our approach simulates the flow using a single field and separates the fluid phases by a free moving interface. The scheme is based on the lattice Boltzmann method and uses the level set method to compute the evolution of the interface. To couple the fluid phases, we develop new boundary conditions which realise the macroscopic jump conditions at the interface and incorporate surface tension in the lattice Boltzmann framework. Various simulations are presented to validate the numerical scheme, e.g. two-phase channel flows, the Young-Laplace law for a bubble and viscous fingering in a Hele-Shaw cell. The results show that the method is feasible over a wide range of density and viscosity differences.
We prove a general monotonicity result about Nash flows in directed networks and use it for the design of truthful mechanisms in the setting where each edge of the network is controlled by a different selfish agent, who incurs costs when her edge is used. The costs for each edge are assumed to be linear in the load on the edge. To compensate for these costs, the agents impose tolls for the usage of edges. When nonatomic selfish network users choose their paths through the network independently and each user tries to minimize a weighted sum of her latency and the toll she has to pay to the edges, a Nash flow is obtained. Our monotonicity result implies that the load on an edge in this setting can not increase when the toll on the edge is increased, so the assignment of load to the edges by a Nash flow yields a monotone algorithm. By a well-known result, the monotonicity of the algorithm then allows us to design truthful mechanisms based on the load assignment by Nash flows. Moreover, we consider a mechanism design setting with two-parameter agents, which is a generalization of the case of one-parameter agents considered in a seminal paper of Archer and Tardos. While the private data of an agent in the one-parameter case consists of a single nonnegative real number specifying the agent's cost per unit of load assigned to her, the private data of a two-parameter agent consists of a pair of nonnegative real numbers, where the first one specifies the cost of the agent per unit load as in the one-parameter case, and the second one specifies a fixed cost, which the agent incurs independently of the load assignment. We give a complete characterization of the set of output functions that can be turned into truthful mechanisms for two-parameter agents. Namely, we prove that an output function for the two-parameter setting can be turned into a truthful mechanism if and only if the load assigned to every agent is nonincreasing in the agent's bid for her per unit cost and, for almost all fixed bids for the agent's per unit cost, the load assigned to her is independent of the agent's bid for her fixed cost. When the load assigned to an agent is continuous in the agent's bid for her per unit cost, it must be completely independent of the agent's bid for her fixed cost. These results motivate our choice of linear cost functions without fixed costs for the edges in the selfish routing setting, but the results also seem to be interesting in the context of algorithmic mechanism design themselves.
Estelle is an internationally standardized formal description technique (FDT) designed for the specification of distributed systems, in particular communication protocols. An Estelle specification describes a system of communicating components (module instances). The specified system is closed in a topological sense, i.e. it has no ability to interact with some environment. Because of this restriction, open systems can only be specified together with and incorporated with an environment. To overcome this restriction, we introduce a compatible extension of Estelle, called "Open Estelle". It allows the specification of (topologically) open systems, i.e. systems that have the ability to communicate with any environment through a well-defined external interface. We define aformal syntax and a formal semantics for Open Estelle, both based on and extending the syntax and semantics of Estelle. The extension is compatible syntactically and semantically, i.e. Estelle is a subset of Open Estelle. In particular, the formal semantics of Open Estelle reduces to the Estelle semantics in the special case of a closed system. Furthermore, we present a tool for the textual integration of open systems into environments specified in Open Estelle, and a compiler for the automatic generation of implementations directly from Open Estelle specifications.
It is commonly believed that not all degrees of freedom are needed to produce good solutions for the treatment planning problem in intensity modulated radiotherapy treatment (IMRT). However, typical methods to exploit this fact have either increased the complexity of the optimization problem or were heuristic in nature. In this work we introduce a technique based on adaptively refining variable clusters to successively attain better treatment plans. The approach creates approximate solutions based on smaller models that may get arbitrarily close to the optimal solution. Although the method is illustrated using a specific treatment planning model, the components constituting the variable clustering and the adaptive refinement are independent of the particular optimization problem.
It has been empirically verified that smoother intensity maps can be expected to produce shorter sequences when step-and-shoot collimation is the method of choice. This work studies the length of sequences obtained by the sequencing algorithm by Bortfeld and Boyer using a probabilistic approach. The results of this work build a theoretical foundation for the up to now only empirically validated fact that if smoothness of intensity maps is considered during their calculation, the solutions can be expected to be more easily applied.
We present a parsimonious multi-asset Heston model. All single-asset submodels follow the well-known Heston dynamics and their parameters are typically calibrated on implied market volatilities. We focus on the calibration of the correlation structure between the single-asset marginals in the absence of sucient liquid cross-asset option price data. The presented model is parsimonious in the sense that d(d􀀀1)=2 asset-asset cross-correlations are required for a d-asset Heston model. In order to calibrate the model, we present two general setups corresponding to relevant practical situations: (1) when the empirical cross-asset correlations in the risk neutral world are given by the user and we need to calibrate the correlations between the driving Brownian motions or (2) when they have to be estimated from the historical time series. The theoretical background, including the ergodicity of the multidimensional CIR process, for the proposed estimators is also studied.
For the last decade, optimization of beam orientations in intensitymodulated radiation therapy (IMRT) has been shown to be successful in improving the treatment plan. Unfortunately, the quality of a set of beam orientations depends heavily on its corresponding beam intensity proles. Usually, a stochastic selector is used for optimizing beam orientation, and then a single objective inverse treatment planning algorithm is used for the optimization of beam intensity proles. The overall time needed to solve the inverse planning for every random selection of beam orientations becomes excessive. Recently, considerable improvement has been made in optimizing beam intensity proles by using multiple objective inverse treatment planning. Such an approach results in a variety of beam intensity proles for every selection of beam orientations, making the dependence between beam orientations and its intensity proles less important. We take advantage of this property to present a dynamic algorithm for beam orientation in IMRT which is based on multicriteria inverse planning. The algorithm approximates beam intensity proles iteratively instead of doing it for every selection of beam orientation, saving a considerable amount of calculation time. Every iteration goes from an N-beam plan to a plan with N + 1 beams. Beam selection criteria are based on a score function that minimizes the deviation from the prescribed dose, in addition to a reject-accept criterion. To illustrate the eciency of the algorithm it has been applied to an articial example where optimality is trivial and to three real clinical cases: a prostate carcinoma, a tumor in the head and neck region and a paraspinal tumor. In comparison to the standard equally spaced beam plans, improvements are reported in all of the three clinical examples, even, in some cases with a fewer number of beams.
Investigate the hardware description language Chisel - A case study implementing the Heston model
(2013)
This paper presents a case study comparing the hardware description language „Constructing Hardware in a Scala Embedded Language“(Chisel) to VHDL. For a thorough comparison the Heston Model was implemented, a stochastic model used in financial mathematics to calculate option prices. Metrics like hardware utilization and maximum clock rate were extracted from both resulting designs and compared to each other. The results showed a 30% reduction in code size compared to VHDL, while the resulting circuits had about the same hardware utilization. Using Chisel however proofed to be difficult because of a few features that were not available for this case study.
In this article, a new model predictive control approach to nonlinear stochastic systems will be presented. The new approach is based on particle filters, which are usually used for estimating states or parameters. Here, two particle filters will be combined, the first one giving an estimate for the actual state based on the actual output of the system; the second one gives an estimate of a control input for the system. This is basically done by adopting the basic model predictive control strategies for the second particle filter. Later in this paper, this new approach is applied to a CSTR (continuous stirred-tank reactor) example and to the inverted pendulum.
We study the complexity of finding extreme pure Nash equilibria in symmetric network congestion games and analyse how it depends on the graph topology and the number of users. In our context best and worst equilibria are those with minimum respectively maximum total latency. We establish that both problems can be solved by a Greedy algorithm with a suitable tie breaking rule on parallel links. On series-parallel graphs finding a worst Nash equilibrium is NP-hard for two or more users while finding a best one is solvable in polynomial time for two users and NP-hard for three or more. Additionally we establish NP-hardness in the strong sense for the problem of finding a worst Nash equilibrium on a general acyclic graph.
In the ground vehicle industry it is often an important task to simulate full vehicle models based on the wheel forces and moments, which have been measured during driving over certain roads with a prototype vehicle. The models are described by a system of differential algebraic equations (DAE) or ordinary differential equations (ODE). The goal of the simulation is to derive section forces at certain components for a durability assessment. In contrast to handling simulations, which are performed including more or less complex tyre models, a driver model, and a digital road profile, the models we use here usually do not contain the tyres or a driver model. Instead, the measured wheel forces are used for excitation of the unconstrained model. This can be difficult due to noise in the input data, which leads to an undesired drift of the vehicle model in the simulation.
Testing a new suspension based on real load data is performed on elaborate multi channel test rigs. Usually wheel forces and moments measured during driving maneuvers are reproduced on the rig. Because of the complicated interaction between rig and suspension each new rig configuration has to prove its efficiency with respect to the requirements and the configuration might be subject to optimization. This paper deals with modeling a new rig concept based on two hexapods. The real physical rig has been designed and meanwhile built by MOOG-FCS for VOLKSWAGEN. The aim of the simulation project reported here was twofold: First the simulation of the rig together with real VOLKSWAGEN suspension models at a time where the design was not yet finalized was used to verify and optimize the desired properties of the rig. Second the simulation environment was set up in a way that it can be used to prepare real tests on the rig. The model contains the geometric configuration as well as the hydraulics and the controller. It is implemented as an ADAMS/Car template and can be combined with different suspension models to get a complete assembly representing the entire test rig. Using this model, all steps required for a real test run such as controller adaptation, drive file iteration and simulation can be performed. Geometric or hydraulic parameters can be modified easily to improve the setup and adapt the system to the suspension and the load data.
We compare different notions of differentiability of a measure along a vector field on a locally convex space. We consider in the \(L^2\)-space of a differentiable measure the analoga of the classical concepts of gradient, divergence and Laplacian (which coincides with the Ornstein-Uhlenbeck
operator in the Gaussian case). We use these operators for the extension of the basic results of Malliavin and Stroock on the smoothness of finite dimensional image measures under certain nonsmooth mappings to the case of non-Gaussian measures. The proof of this extension is quite direct and does not use any Chaos-decomposition. Finally, the role of this Laplacian in the
procedure of quantization of anharmonic oscillators is discussed.
One approach to multi-criteria IMRT planning is to automatically calculate a data set of Pareto-optimal plans for a given planning problem in a first phase, and then interactively explore the solution space and decide for the clinically best treatment plan in a second phase. The challenge of computing the plan data set is to assure that all clinically meaningful plans are covered and that as many as possible clinically irrelevant plans are excluded to keep computation times within reasonable limits. In this work, we focus on the approximation of the clinically relevant part of the Pareto surface, the process that consititutes the first phase. It is possible that two plans on the Parteto surface have a very small, clinically insignificant difference in one criterion and a significant difference in one other criterion. For such cases, only the plan that is clinically clearly superior should be included into the data set. To achieve this during the Pareto surface approximation, we propose to introduce bounds that restrict the relative quality between plans, so called tradeoff bounds. We show how to integrate these trade-off bounds into the approximation scheme and study their effects.
In this paper we consider the location of stops along the edges of an already existing public transportation network, as introduced in [SHLW02]. This can be the introduction of bus stops along some given bus routes, or of railway stations along the tracks in a railway network. The goal is to achieve a maximal covering of given demand points with a minimal number of stops. This bicriterial problem is in general NP-hard. We present a nite dominating set yielding an IP-formulation as a bicriterial set covering problem. We use this formulation to observe that along one single straight line the bicriterial stop location problem can be solved in polynomial time and present an e cient solution approach for this case. It can be used as the basis of an algorithm tackling real-world instances.
Ownership Domains generalize ownership types. They support programming patterns like iterators that are not possible with ordinary ownership types. However, they are still too restrictive for cases in which an object X wants to access the public domains of an arbitrary number of other objects, which often happens in observer scenarios. To overcome this restriction, we developed so-called loose domains which abstract over several precise domains. That is, similar to the relation between supertypes and subtypes we have a relation between loose and precise domains. In addition, we simplified ownership domains by reducing the number of domains per object to two and hard-wiring the access permissions between domains. We formalized the resulting type system for an OO core language and proved type soundness and a fundamental accessibility property.
Hyperidentities
(1992)
The concept of a free algebra plays an essential role in universal algebra and in computer science. Manipulation of terms, calculations and the derivation of identities are performed in free algebras. Word problems, normal forms, system of reductions, unification and finite bases of identities are topics in algebra and logic as well as in computer science. A very fruitful point of view is to consider structural properties of free algebras. A.I. Malcev initiated a thorough research of the congruences of free algebras. Henceforth congruence permutable, congruence distributive and congruence modular varieties are
intensively studied. A lot of Malcev type theorems are connected to the congruence lattice of free algebras. Here we consider free algebras as semigroups of compositions of terms and more specific as clones of terms. The properties of these semigroups and clones are adequately described by hyperidentities. Naturally a lot of theorems of "semigroup" or "clone" type can be derived. This topic of research is still in its beginning and therefore a lot öf concepts and results cannot be presented in a final and polished form. Furthermore a lot of problems and questions are open which are of importance for the further development of the theory of hyperidentities.
On derived varieties
(1996)
Derived varieties play an essential role in the theory of hyperidentities. In [11] we have shown that derivation diagrams are a useful tool in the analysis of derived algebras and varieties. In this paper this tool is developed further in order to use it for algebraic constructions of derived algebras. Especially the operator \(S\) of subalgebras, \(H\) of homomorphic irnages and \(P\) of direct products are studied. Derived groupoids from the groupoid \(N or (x,y)\) = \(x'\wedge y'\) and from abelian groups are considered. The latter class serves as an example for fluid algebras and varieties. A fluid variety \(V\) has no derived variety as a subvariety and is introduced as a counterpart for solid varieties. Finally we use a property of the commutator of derived algebras in order to show that solvability and nilpotency are preserved under derivation.
A polynomial function \(f : L \to L\) of a lattice \(\mathcal{L}\) = \((L; \land, \lor)\) is generated by the identity function id \(id(x)=x\) and the constant functions \(c_a (x) = a\) (for every \(x \in L\)), \(a \in L\) by applying the operations \(\land, \lor\) finitely often. Every polynomial function in one or also in several variables is a monotone function of \(\mathcal{L}\).
If every monotone function of \(\mathcal{L}\)is a polynomial function then \(\mathcal{L}\) is called orderpolynomially complete. In this paper we give a new characterization of finite order-polynomially lattices. We consider doubly irreducible monotone functions and point out their relation to tolerances, especially to central relations. We introduce chain-compatible lattices
and show that they have a non-trivial congruence if they contain a finite interval and an infinite chain. The consequences are two new results. A modular lattice \(\mathcal{L}\) with a finite interval is order-polynomially complete if and only if \(\mathcal{L}\) is finite projective geometry. If \(\mathcal{L}\) is simple modular lattice of infinite length then every nontrivial interval is of infinite length and has the same cardinality as any other nontrivial interval of \(\mathcal{L}\). In the last sections we show the descriptive power of polynomial functions of
lattices and present several applications in geometry.
Order-semi-primal lattices
(1994)
Minimum Cut Tree Games
(2008)
In this paper we introduce a cooperative game based on the minimum cut tree problem which is also known as multi-terminal maximum flow problem. Minimum cut tree games are shown to be totally balanced and a solution in their core can be obtained in polynomial time. This special core allocation is closely related to the solution of the original graph theoretical problem. We give an example showing that the game is not supermodular in general, however, it is for special cases and for some of those we give an explicit formula for the calculation of the Shapley value.
A simple transformation of the Equation of Motion (EoM) allows us to directly integrate nonlinear structural models into the recursive Multibody System (MBS) formalism of SIMPACK. This contribution describes how the integration is performed for a discrete Cosserat rod model which has been developed at the ITWM. As a practical example, the run-up of a simplified three-bladed wind turbine is studied where the dynamic deformations of the three blades are calculated by the Cosserat rod model.
In this paper we address the improvement of transfer quality in public mass transit networks. Generally there are several transit operators offering service and our work is motivated by the question how their timetables can be altered to yield optimized transfer possibilities in the overall network. To achieve this, only small changes to the timetables are allowed. The set-up makes it possible to use a quadratic semi-assignment model to solve the optimization problem. We apply this model, equipped with a new way to assess transfer quality, to the solution of four real-world examples. It turns out that improvements in overall transfer quality can be determined by such optimization-based techniques. Therefore they can serve as a first step towards a decision support tool for planners of regional transit networks.
This paper describes some new algorithms for the accurate calculation of surface properties. In the first part an arithmetic on Bézier surfaces is introduced. Formulas are given, which determine the Bézier points and weights of the resulting surface from the points and weights of the operand surfaces. An application of the arithmetic operations to the surface interrogation methods are described in the second part. It turns out, that the quality analysis can be reduced to a few numerical stable operations. Finally the advantages and disadvantages of this method are discussed.
Partitioned chain grammars
(1979)
This paper introduces a new class of grammars, the partitioned chain grammars, for which efficient parsers can be automatically generated. Besides being efficiently parsable these grammars possess a number of other properties, which make them very attractive for the use in parser-generators. They for instance form a large grammarclass and describe all deterministic context-free languages. Main advantage of the partitioned chain grammars however is, that given a language it is usually easier to describe it by a partitioned chain grammar than to construct a grammar of some other type commonly used in parser-generators for it.
Open cell foams are a promising and versatile class of porous materials. Open metal foams serve as crash absorbers and catalysts, metal and ceramic foams are used for filtering, and open polymer foams are hidden in every-day-life items like mattresses or chairs. Due to their high porosity, classical 2d quantitative analysis can give only very limited information about the microstructure of open foams. On the other hand, micro computed tomography (μCT) yields high quality 3d images of open foams. Thus 3d imaging is the method of choice for open cell foams. In this report we summarise a variety of methods for the analysis of the resulting volume images of open foam structures developed or refined and applied at the Fraunhofer ITWM over a course of nearly ten years: The model based determination of mean characteristics like the mean cell volume or the mean strut thickness demanding only a simple binarisation as well as the image analytic cell reconstruction yielding empirical distributions of cell characteristics.
In order to optimize the acoustic properties of a stacked fiber non-woven, the microstructure of the non-woven is modeled by a macroscopically homogeneous random system of straight cylinders (tubes). That is, the fibers are modeled by a spatially stationary random system of lines (Poisson line process), dilated by a sphere. Pressing the non-woven causes anisotropy. In our model, this anisotropy is described by a one parametric distribution of the direction of the fibers. In the present application, the anisotropy parameter has to be estimated from 2d reflected light microscopic images of microsections of the non-woven. After fitting the model, the flow is computed in digitized realizations of the stochastic geometric model using the lattice Boltzmann method. Based on the flow resistivity, the formulas of Delany and Bazley predict the frequency-dependent acoustic absorption of the non-woven in the impedance tube. Using the geometric model, the description of a non-woven with improved acoustic absorption properties is obtained in the following way: First, the fiber thicknesses, porosity and anisotropy of the fiber system are modified. Then the flow and acoustics simulations are performed in the new sample. These two steps are repeatedc for various sets of parameters. Finally, the set of parameters for the geometric model leading to the best acoustic absorption is chosen.
IMRT planning on adaptive volume structures – a significant advance of computational complexity
(2004)
In intensity-modulated radiotherapy (IMRT) planning the oncologist faces the challenging task of finding a treatment plan that he considers to be an ideal compromise of the inherently contradictive goals of delivering a sufficiently high dose to the target while widely sparing critical structures. The search for this a priori unknown compromise typically requires the computation of several plans, i.e. the solution of several optimization problems. This accumulates to a high computational expense due to the large scale of these problems - a consequence of the discrete problem formulation. This paper presents the adaptive clustering method as a new algorithmic concept to overcome these difficulties. The computations are performed on an individually adapted structure of voxel clusters rather than on the original voxels leading to a decisively reduced computational complexity as numerical examples on real clinical data demonstrate. In contrast to many other similar concepts, the typical trade-off between a reduction in computational complexity and a loss in exactness can be avoided: the adaptive clustering method produces the optimum of the original problem. This flexible method can be applied to both single- and multi-criteria optimization methods based on most of the convex evaluation functions used in practice
On Abstract Shapes of RNA
(2008)
As any RNA sequence can be folded in many different ways, there are lots of different possible secondary structures for a given sequence. Most computational prediction methods based on free energy minimization compute a number of suboptimal foldings and we have to identify the native structures among all these possible secondary structures. For this reason, much effort has been made to develop approaches for identifying good predictions of RNA secondary structure. Using the abstract shapes approach as introduced by Giegerich et al., each class of similar secondary structures is represented by one shape and the native structures can be found among the top shape representatives. In this article, we derive some interesting results answering enumeration problems for abstract shapes and secondary structures of RNA. We start by computing symptotical representations for the number of shape representations of length n. Our main goal is to find out how much the search space can be reduced by using the concept of abstract shapes. To reach this goal, we analyze the number of secondary structures and shapes compatible with an RNA sequence of length n under the assumption that base pairing is allowed between arbitrary pairs of bases analytically and compare their exponential growths. Additionally, we analyze the number of secondary structures compatible with an RNA sequence of length n under the assumptions that base pairing is allowed only between certain pairs of bases and that the structures meet some appropriate conditions. The exponential growth factors of the resulting asymptotics are compared to the corresponding experimentally obtained value as given by Giegerich et al.
This article focuses on the analytical analysis of the free energy in a realistic model for RNA secondary structures. In fact, the free energy in a stochastic model derived from a database of small and large subunit ribosomal RNA (SSU and LSU rRNA) data is studied. A common thermody-namic model for computing the free energy of a given RNA secondary structure, as well as stochastic context-free grammars and generating functions are used to derive the desired results. These results include asymptotics for the expected free energy and for the corresponding variance of a random RNA secondary structure. The quality of our model is judged by comparing the derived results to the used database of SSU and LSU rRNA data. At the end of this article, it is discussed how our results could be used to help on identifying good predictions of RNA secondary structure.
In this paper, the analysis of one approach for the regularization of pure Neumann problems for second order elliptical equations, e.g., Poisson’s equation and linear elasticity equations, is presented. The main topic under consideration is the behavior of the condition number of the regularized problem. A general framework for the analysis is presented. This allows to determine a form of regularization term which leads to the “natural” asymptotic of the condition number of the regularized problem with respect to mesh parameter. Some numerical results, which support theoretical analysis are presented as well. The main motivation for the presented research is to develop theoretical background for an efficient and robust implementation of the solver for pure Neumann problems for the linear elasticity equations. Such solvers usually are needed in a number of domain decomposition methods, e.g. FETI. Developed approaches are planed to be used in software, developing in ITWM, e.g. KneeMech simulation software.
In a dynamic network, the quickest path problem asks for a path minimizing the time needed to send a given amount of flow from source to sink along this path. In practical settings, for example in evacuation or transportation planning, the reliability of network arcs depends on the specific scenario of interest. In this circumstance, the question of finding a quickest path among all those having at least a desired path reliability arises. In this article, this reliable quickest path problem is solved by transforming it to the restricted quickest path problem. In the latter, each arc is associated a nonnegative cost value and the goal is to find a quickest path among those not exceeding a predefined budget with respect to the overall (additive) cost value. For both, the restricted and reliable quickest path problem, pseudopolynomial exact algorithms and fully polynomial-time approximation schemes are proposed.
In a dynamic network, the quickest path problem asks for a path such that a given amount of flow can be sent from source to sink via this path in minimal time. In practical settings, for example in evacuation or transportation planning, the problem parameters might not be known exactly a-priori. It is therefore of interest to consider robust versions of these problems in which travel times and/or capacities of arcs depend on a certain scenario. In this article, min-max versions of robust quickest path problems are investigated and, depending on their complexity status, exact algorithms or fully polynomial-time approximation schemes are proposed.
Virtual material design is the microscopic variation of materials in the computer, followed by the numerical evaluation of the effect of this variation on the material‘s macroscopic properties. The goal of this procedure is an in some sense improved material. Here, we give examples regarding the dependence of the effective elastic moduli of a composite material on the geometry of the shape of an inclusion. A new approach on how to solve such interface problems avoids mesh generation and gives second order accurate results even in the vicinity of the interface. The Explicit Jump Immersed Interface Method is a finite difference method for elliptic partial differential equations that works on an equidistant Cartesian grid in spite of non-grid aligned discontinuities in equation parameters and solution. Near discontinuities, the standard finite difference approximations are modified by adding correction terms that involve jumps in the function and its derivatives. This work derives the correction terms for two dimensional linear elasticity with piecewise constant coefficients, i.e. for composite materials. It demonstrates numerically convergence and approximation properties of the method.
We introduce a refined tree method to compute option prices using the stochastic volatility model of Heston. In a first step, we model the stock and variance process as two separate trees and with transition probabilities obtained by matching tree moments up to order two against the Heston model ones. The correlation between the driving Brownian motions in the Heston model is then incorporated by the node-wise adjustment of the probabilities. This adjustment, leaving the marginals fixed, optimizes the match between tree and model correlation. In some nodes, we are even able to further match moments of higher order. Numerically this gives convergence orders faster than 1/N, where N is the number of dis- cretization steps. Accuracy of our method is checked for European option prices against a semi closed-form, and our prices for both European and American options are compared to alternative approaches.
We study global and local robustness properties of several estimators for shape and scale in a generalized Pareto model. The estimators considered in this paper cover maximum likelihood estimators, skipped maximum likelihood estimators, moment-based estimators, Cramér-von-Mises Minimum Distance estimators, and, as a special case of quantile-based estimators, Pickands Estimator as well as variants of the latter tuned for higher finite sample breakdown point (FSBP), and lower variance. We further consider an estimator matching population median and median of absolute deviations to the empirical ones (MedMad); again, in order to improve its FSBP, we propose a variant using a suitable asymmetric Mad as constituent, and which may be tuned to achieve an expected FSBP of 34%. These estimators are compared to one-step estimators distinguished as optimal in the shrinking neighborhood setting, i.e., the most bias-robust estimator minimizing the maximal (asymptotic) bias and the estimator minimizing the maximal (asymptotic) MSE. For each of these estimators, we determine the FSBP, the influence function, as well as statistical accuracy measured by asymptotic bias, variance, and mean squared error—all evaluated uniformly on shrinking convex contamination neighborhoods. Finally, we check these asymptotic theoretical findings against finite sample behavior by an extensive simulation study.
We present some optimality results for robust Kalman filtering. To this end, we introduce the general setup of state space models which will not be limited to a Euclidean or time-discrete framework. We pose the problem of state reconstruction and repeat the classical existing algorithms in this context. We then extend the ideal-model setup allowing for outliers which in this context may be system-endogenous or -exogenous, inducing the somewhat conflicting goals of tracking and attenuation. In quite a general framework, we solve corresponding minimax MSE-problems for both types of outliers separately, resulting in saddle-points consisting of an optimally-robust procedure and a corresponding least favorable outlier situation. Still insisting on recursivity, we obtain an operational solution, the rLS filter and variants of it. Exactly robust-optimal filters would need knowledge of certain hard-to-compute conditional means in the ideal model; things would be much easier if these conditional means were linear. Hence, it is important to quantify the deviation of the exact conditional mean from linearity. We obtain a somewhat surprising characterization of linearity for the conditional expectation in this setting. Combining both optimal filter types (for system-endogenous and -exogenous situation) we come up with a delayed hybrid filter which is able to treat both types of outliers simultaneously. Keywords: robustness, Kalman Filter, innovation outlier, additive outlier
The intuitionistic calculus mj for sequents, in which no other logical symbols than those for implication and universal quantification occur, is introduced and analysed. It allows a simple backward application, called mj-reduction here, for searching for derivation trees. Terms needed in mj-reduction can be found with the unification algorithm. mj-Reduction with unification can be seen as a natural extension of SLD-resolution. mj-Derivability of the sequents considered here coincides with derivability in Johansson's minimal intuitionistic calculus LHM in [6]. Intuitionistic derivability of formulae with negation and classical derivability of formulae with all usual logical symbols can be expressed with mj-derivability and hence be verified by mj-reduction. mj-Derivations can be easily translated into LJ-derivations without
"Schnitt", or into NJ-derivations in a slightly sharpened form of Prawitz' normal form. In the first three sections, the systematic use of mj-reduction for proving in predicate logic is emphasized. Although the fourth section, the last and largest, is exclusively devoted to the mathematical analysis of the calculus mj, the first three sections may be of interest to a wider readership, including readers looking for applications of symbolic logic. Unfortunately, the mathematical analysis of the calculus mj, as the study of Gentzen's calculi, demands a large amount of technical work that obscures the natural unfolding of the argumentation. To alleviate this, definitions and theorems are completely embedded in the text to provide a fluent and balanced mathematical discourse: new concepts are indicated with bold-face, proofs of assertions are outlined, or omitted when it is assumed that the reader can provide them.
We are concerned with modeling and simulation of the pressing section of a paper machine. We state a two-dimensional model of a press nip which takes into account elasticity and flow phenomena. Nonlinear filtration laws are incorporated into the flow model. We present a numerical solution algorithm and a numerical investigation of the model with special focus on inertia effects.
This work deals with the optimal control of a free surface Stokes flow which responds to an applied outer pressure. Typical applications are fiber spinning or thin film manufacturing. We present and discuss two adjoint-based optimization approaches that differ in the treatment of the free boundary as either state or control variable. In both cases the free boundary is modeled as the graph of a function. The PDE-constrained optimization problems are numerically solved by the BFGS method, where the gradient of the reduced cost function is expressed in terms of adjoint variables. Numerical results for both strategies are finally compared with respect to accuracy and efficiency.
A natural extension of SLD-resolution is introduced as a goal directed proof procedure
for the full first order implicational fragment of intuitionistic logic. Its intuitionistic semantic fits a procedural interpretation of logic programming. By allowing arbitrary nested implications it can be used for implementing modularity in logic programs. With adequate negation axioms it gives an alternative to negation as failure and leads to a proof procedure for full first order predicate logic.
The use of non-volatile semiconductor memory within an extended storage hierarchy promises significant performance improvements for transaction processing. Although page-addressable semiconductor memories like extended memory, solid-state disks and disk caches are commercially available since several years, no detailed investigation of their use for transaction processing has been performed so far. We present a comprehensive simulation study that compares the performance of these storage types and of different usage forms. The following usage forms are considered: allocation of entire log and database files in non-volatile semiconductor memory, using a so-called write buffer to perform disk writes asynchronously, and caching of database pages at intermediate storage levels (in addition to main memory caching). Our simulations are conducted with both synthetically generated workloads and traces from real-life database applications. In particular, simulation results will be presented for the debit-credit workload frequently used in transaction processing benchmarks. As expected, the greatest performance improvements (but at the highest cost) can be achieved by storing log and database files completely in non-volatile semiconductor memory. For update-intensive
workloads, a limited amount of non-volatile memory used as a write buffer also proved to be very effective. To reduce the number of disk reads; caching of database pages in addition to main memory is best supported by an extended memory buffer. In this respect, disk caches are found to be less effective as they are designed for one-level caching. Different storage costs suggest that it may be cost-effective to use two or even three of the intermediate storage types together. The performance improvements obtainable by the use of non-volatile semiconductor memory is also found to reduce the need for sophisticated DBMS buffer management in order to achieve high transaction processing performance.
Due to the increasing number of natural or man-made disasters, the application of operations research methods in evacuation planning has seen a rising interest in the research community. From the beginning, evacuation planning has been highly focused on car-based evacuation. Recently, also the evacuation of transit depended evacuees with the help of buses has been considered.
In this case study, we apply two such models and solution algorithms to evacuate a core part of the metropolitan capital city Kathmandu of Nepal as a hypothetical endangered region, where a large part of population is transit dependent. We discuss the computational results for evacuation time under a broad range of possible scenarios, and derive planning suggestions for practitioners.
This work presents a proof of convergence of a discrete solution to a continuous one. At first, the continuous problem is stated as a system
of equations which describe filtration process in the pressing section of a
paper machine. Two flow regimes appear in the modeling of this problem.
The model for the saturated flow is presented by the Darcy’s law and the mass conservation. The second regime is described by the Richards approach together with a dynamic capillary pressure model. The finite
volume method is used to approximate the system of PDEs. Then the existence of a discrete solution to proposed finite difference scheme is proven.
Compactness of the set of all discrete solutions for different mesh sizes is
proven. The main Theorem shows that the discrete solution converges
to the solution of continuous problem. At the end we present numerical
studies for the rate of convergence.
The rapid development of any field of knowledge brings with it unavoidable fragmentation and proliferation of new disciplines. The development of computer science is no exception. Software engineering (SE) and human-computer interaction (HCI) are both relatively new disciplines of computer science. Furthermore, as both names suggest, they each have strong connections with other subjects. SE is concerned with methods and tools for general software development based on engineering principles. This discipline has its roots not only in computer science but also in a number of traditional engineering disciplines. HCI is concerned with methods and tools for the development of human-computer interfaces, assessing the usability of computer systems and with broader issues about how people interact with computers. It is based on theories about how humans process information and interact with computers, other objects and other people in the organizational and social contexts in
which computers are used. HCI draws on knowledge and skills from psychology, anthropology and sociology in addition to computer science. Both disciplines need ways of measuring how well their products and development processes fulfil their intended requirements. Traditionally SE has been concerned with 'how software is constructed' and HCI with 'how people use software'. Given the
different histories of the disciplines and their different objectives, it is not surprising that they take different approaches to measurement. Thus, each has its own distinct 'measurement culture.' In this paper we analyse the differences and the commonalties of the two cultures by examining the measurement approaches used by each. We then argue the need for a common measurement taxonomy and framework, which is derived from our analyses of the two disciplines. Next we demonstrate the usefulness of the taxonomy and framework via specific example studies drawn from our own work and that of others and show that, in fact, the two disciplines have many important similarities as well as differences and that there is some evidence to suggest that they are growing closer. Finally, we discuss the role of the taxonomy as a framework to support: reuse, planning future studies, guiding practice and facilitating communication between the two disciplines.
Numerical modeling of electrochemical process in Li-Ion battery is an emerging topic of great practical interest. In this work we present a Finite Volume discretization of electrochemical diffusive processes occurring during the operation of Li-Ion batteries. The system of equations is a nonlinear, time-dependent diffusive system, coupling the Li concentration and the electric potential. The system is formulated at length-scale at which two different types of domains are distinguished, one for the electrolyte and one for the active solid particles in the electrode. The domains can be of highly irregular shape, with electrolyte occupying the pore space of a porous electrode. The material parameters in each domain differ by several orders of magnitude and can be non-linear functions of Li ions concentration and/or the electrical potential. Moreover, special interface conditions are imposed at the boundary separating the electrolyte from the active solid particles. The field variables are discontinuous across such an interface and the coupling is highly non- linear, rendering direct iteration methods ineffective for such problems. We formulate a Newton iteration for an purely implicit Finite Volume discretization of the coupled system. A series of numerical examples are presented for different type of electrolyte/electrode configurations and material parameters. The convergence of the Newton method is characterized both as function of nonlinear material parameters as well as the nonlinearity in the interface conditions.
Optimization of Projection Methods for Solving ill-posed Problems. In this paper we propose a modification of the projection scheme for solving ill-posed problems. We show that this modification allows to obtain the best possible order of accuracy of Tikhonov Regularization using an amount of information which is far less than for the standard projection technique.
In this paper we show how Metropolis Light Transport can be extended both in the underlying theoretical framework and the algorithmic implementation to incorporate volumetric scattering.
We present a generalization of the path integral formulation thathandles anisotropic scattering in non-homogeneous media. Based on this framework we introduce a new mutation strategy that is
specifically designed for participating media. It exploits the locality of light propagation by perturbing certain interaction points within the medium. To efficiently sample inhomogeneous media a new ray marching method has been developed that avoids aliasing artefacts and is significantly faster than stratified sampling. The resulting global illumination algorithm provides a physically correct simulation of light transport in the presence of participating media that includes effects such as volume caustics and multiple volume scattering. It is not restricted to certain classes of geometry and scattering models and has minimal memory requirements. Furthermore, it is unbiased and robust, in the sense that it produces satisfactory results for a wide range of input scenes and lighting situations within acceptable time bounds. In particular, we found that it is weil suited for complex scenes with many light sources.
We consider the contact of two elastic bodies with rough surfaces at the interface. The size of the micropeaks and valleys is very small compared with the macrosize of the bodies’ domains. This makes the direct application of the FEM for the calculation of the contact problem prohibitively costly. A method is developed that allows deriving a macrocontact condition on the interface. The method involves the twoscale asymptotic homogenization procedure that takes into account the microgeometry of the interface layer and the stiffnesses of materials of both domains. The macrocontact condition can then be used in a FEM model for the contact problem on the macrolevel. The averaged contact stiffness obtained allows the replacement of the interface layer in the macromodel by the macrocontact condition.
The theory of the two-scale convergence was applied to homogenization of elasto-plastic composites with a periodic structure and exponential hardening law. The theory is based on the fact that the elastic as well as the plastic part of the stress field two-scale converges to a limit, which is factorized by parts, depending only on macroscopic characteristics, represented in terms of corresponding part of the homogenised stress tensor and only on stress concentration tensor, related to the micro-geometry and elastic or plastic micro-properties of composite components. The theory was applied to metallic matrix material with Ludwik and Hocket-Sherby hardening law and pure elastic inclusions in two numerical examples. Results were compared with results of mechanical averaging based on the self-consistent methods.
A spectral theory for constituents of macroscopically homogeneous random microstructures modeled as homogeneous random closed sets is developed and provided with a sound mathematical basis, where the spectrum obtained by Fourier methods corresponds to the angular intensity distribution of x-rays scattered by this constituent. It is shown that the fast Fourier transform applied to three-dimensional images of microstructures obtained by micro-tomography is a powerful tool of image processing. The applicability of this technique is is demonstrated in the analysis of images of porous media.
Two approaches for determining the Euler-Poincaré characteristic of a set observed on lattice points are considered in the context of image analysis { the integral geometric and the polyhedral approach. Information about the set is assumed to be available on lattice points only. In order to retain properties of the Euler number and to provide a good approximation of the true Euler number of the original set in the Euclidean space, the appropriate choice of adjacency in the lattice for the set and its background is crucial. Adjacencies are defined using tessellations of the whole space into polyhedrons. In R 3 , two new 14 adjacencies are introduced additionally to the well known 6 and 26 adjacencies. For the Euler number of a set and its complement, a consistency relation holds. Each of the pairs of adjacencies (14:1; 14:1), (14:2; 14:2), (6; 26), and (26; 6) is shown to be a pair of complementary adjacencies with respect to this relation. That is, the approximations of the Euler numbers are consistent if the set and its background (complement) are equipped with this pair of adjacencies. Furthermore, sufficient conditions for the correctness of the approximations of the Euler number are given. The analysis of selected microstructures and a simulation study illustrate how the estimated Euler number depends on the chosen adjacency. It also shows that there is not a uniquely best pair of adjacencies with respect to the estimation of the Euler number of a set in Euclidean space.
Efficient algorithms and structural results are presented for median
problems with 2 new facilities including the classical 2-Median problem,
the 2-Median problem with forbidden regions and bicriterial 2-Median
problems. This is the first paper dealing with multi-facility multiobjective location problems. The time complexity of all presented algorithms is O(MlogM), where M is the number of existing facilities.
Home Health Care (HHC) services are becoming increasingly important in Europe’s aging societies. Elderly people have varying degrees of need for assistance and medical treatment. It is advantageous to allow them to live in their own homes as long as possible, since a long-term stay in a nursing home can be much more costly for the social insurance system than a treatment at home providing assistance to the required level. Therefore, HHC services are a cost-effective and flexible instrument in the social system. In Germany, organizations providing HHC services are generally either larger charities with countrywide operations or small private companies offering services only in a city or a rural area. While the former have a hierarchical organizational structure and a large number of employees, the latter typically only have some ten to twenty nurses under contract. The relationship to the patients (“customers”) is often long-term and can last for several years. Therefore acquiring and keeping satisfied customers is crucial for HHC service providers and intensive competition among them is observed.
In this paper, a multi-period supply chain network design problem is addressed. Several aspects of practical relevance are considered such as those related with the financial decisions that must be accounted for by a company managing a supply chain. The decisions to be made comprise the location of the facilities, the flow of commodities and the investments to make in alternative activities to those directly related with the supply chain design. Uncertainty is assumed for demand and interest rates, which is described by a set of scenarios. Therefore, for the entire planning horizon, a tree of scenarios is built. A target is set for the return on investment and the risk of falling below it is measured and accounted for. The service level is also measured and included in the objective function. The problem is formulated as a multi-stage stochastic mixed-integer linear programming problem. The goal is to maximize the total financial benefit. An alternative formulation which is based upon the paths in the scenario tree is also proposed. A methodology for measuring the value of the stochastic solution in this problem is discussed. Computational tests using randomly generated data are presented showing that the stochastic approach is worth considering in these type of problems.
No doubt: Mathematics has become a technology in its own right, maybe even a key technology. Technology may be defined as the application of science to the problems of commerce and industry. And science? Science maybe defined as developing, testing and improving models for the prediction of system behavior; the language used to describe these models is mathematics and mathematics provides methods to evaluate these models. Here we are! Why has mathematics become a technology only recently? Since it got a tool, a tool to evaluate complex, "near to reality" models: Computer! The model may be quite old - Navier-Stokes equations describe flow behavior rather well, but to solve these equations for realistic geometry and higher Reynolds numbers with sufficient precision is even for powerful parallel computing a real challenge. Make the models as simple as possible, as complex as necessary - and then evaluate them with the help of efficient and reliable algorithms: These are genuine mathematical tasks.
One of the fundamental problems in computational structural biology is the prediction of RNA secondary structures from a single sequence. To solve this problem, mainly two different approaches have been used over the past decades: the free energy minimization (MFE) approach which is still considered the most popular and successful method and the competing stochastic context-free grammar (SCFG) approach. While the accuracy of the MFE based algorithms is limited by the quality of underlying thermodynamic models, the SCFG method abstracts from free energies and instead tries to learn about the structural behavior of the molecules by training the grammars on known real RNA structures, making it highly dependent on the availability of a rich high quality training set. However, due to the respective problems associated with both methods, new statistics based approaches towards RNA structure prediction have become increasingly appreciated. For instance, over the last years, several statistical sampling methods and clustering techniques have been invented that are based on the computation of partition functions (PFs) and base pair probabilities according to thermodynamic models. A corresponding SCFG based statistical sampling algorithm for RNA secondary structures has been studied just recently. Notably, this probabilistic method is capable of producing accurate (prediction) results, where its worst-case time and space requirements are equal to those of common RNA folding algorithms for single sequences.
The aim of this work is to present a comprehensive study on how enriching the underlying SCFG by additional information on the lengths of generated substructures (i.e. by incorporating length-dependencies into the SCFG based sampling algorithm, which is actually possible without significant losses in performance) affects the reliability of the induced RNA model and the accuracy of sampled secondary structures. As we will see, significant differences with respect to the overall quality of generated sample sets and the resulting predictive accuracy are typically implied. In principle, when considering the more specialized length-dependent SCFG model as basis for statistical sampling, a higher accuracy of predicted foldings can be reached at the price of a lower diversity of generated candidate structures (compared to the more general traditional SCFG variant or sampling based on PFs that rely on free energies).
On a multigrid solver for the threedimensional Biot poroelasticity system in multilayered domains
(2006)
In this paper, we present problem–dependent prolongation and problem–dependent restriction for a multigrid solver for the three-dimensional Biot poroelasticity system, which is solved in a multilayered domain. The system is discretized on a staggered grid using the finite volume method. During the discretization, special care is taken of the discontinuous coefficients. For the efficient multigrid solver, a need in operator-dependent restriction and/or prolongation arises. We derive these operators so that they are consistent with the discretization. They account for the discontinuities of the coefficients, as well as for the coupling of the unknowns within the Biot system. A set of numerical experiments shows necessity of use of the operator-dependent restriction and prolongation in the multigrid solver for the considered class of problems.
In this paper we propose a finite volume discretization for the threedimensional Biot poroelasticity system in multilayered domains. For the stability reasons, staggered grids are used. The discretization accounts for discontinuity of the coefficients across the interfaces between layers with different physical properties. Numerical experiments, based on the proposed discretization showed second order convergence in the maximum norm for the primary as well as flux unknowns of the system. A certain application example is presented as well.