Refine
Document Type
- Article (20)
- Conference Proceeding (1)
Has Fulltext
- yes (21) (remove)
Keywords
Faculty / Organisational entity
The importance of well trained and stable neck flexors and extensors as well as trunk muscles for intentional headers in soccer is increasingly discussed. The neck flexors and extensors should ensure a coupling of trunk and head at the time of ball contact to increase the physical mass hitting the ball and reduce head acceleration. The aim of the study was to analyze the influence of a 6-week strength training program (neck flexors, neck extensors) on the acceleration of the head during standing, jumping and running headers as well as after fatigue of the trunk muscles on a pendulum header. A total of 33 active male soccer players (20.3 ± 3.6 years, 1.81 ± 0.07 m, 75.5 ± 8.3 kg) participated and formed two training intervention groups (IG1: independent adult team, IG2: independent youth team) and one control group (CG: players from different teams). The training intervention consisted of three exercises for the neck flexors and extensors. The training effects were verified by means of the isometric maximum voluntary contraction (IMVC) measured by a telemetric Noraxon DTS force sensor. The head acceleration during ball contact was determined using a telemetric Noraxon DTS 3D accelerometer. There was no significant change of the IMVC over time between the groups (F=2.265, p=.121). Head acceleration was not reduced significantly for standing (IG1 0.4 ± 2.0, IG2 0.1 ± 1.4, CG -0.4 ± 1.2; F = 0.796, p = 0.460), jumping (IG1-0.7 ± 1.4, IG2-0.2 ± 0.9, CG 0.1 ± 1.2; F = 1.272, p = 0.295) and running (IG1-1.0 ± 1.9, IG2-0.2 ± 1.4, CG -0.1 ± 1.6; F = 1.050, p = 0.362) headers as well as after fatigue of the trunk musculature for post-jumping (IG1-0.2 ± 2.1, IG2-0.6 ± 1.4; CG -0.6 ± 1.3; F = 0.184, p = 0.833) and post-running (IG1-0.3 ± 1.6, IG2-0.7 ± 1.2, CG 0.0 ± 1.4; F = 0.695, p = 0.507) headers over time between IG1, IG2 and CG. A 6-week strength training of the neck flexors and neck extensors could not show the presumed preventive benefit. Both the effects of a training intervention and the consequences of an effective intervention for the acceleration of the head while heading seem to be more complex than previously assumed and presumably only come into effect in case of strong impacts.
Key words: Heading, kinetics, head-neck-torso-alignment, neck musculature, repetitive head impacts, concussion
Heading in Soccer: Does Kinematics of the Head‐Neck‐Torso Alignment Influence Head Acceleration?
(2021)
There is little scientific evidence regarding the cumulative effect of purposeful heading. The head-neck-torso alignment is considered to be of great importance when it comes to minimizing potential risks when heading. Therefore, this study determined the relationship between head-neck-torso alignment (cervical spine, head, thoracic spine) and the acceleration of the head, the relationship between head acceleration and maximum ball speed after head impact and differences between head accelerations throughout different heading approaches (standing, jumping, running). A total of 60 male soccer players (18.9 ± 4.0 years, 177.6 ± 14.9 cm, 73.1 ± 8.6 kg) participated in the study. Head accelerations were measured by a telemetric Noraxon DTS 3D Sensor, whereas angles for the head-neck-torso alignment and ball speed were analyzed with a Qualisys Track Manager program. No relationship at all was found for the standing, jumping and running approaches. Concerning the relationship between head acceleration and maximum ball speed after head impact only for the standing header a significant result was calculated (p = 0.024, R2 = .085). A significant difference in head acceleration (p < .001) was identified between standing, jumping and running headers. To sum up, the relationship between head acceleration and head-neck-torso alignment is more complex than initially assumed and could not be proven in this study. Furthermore first data were generated to check whether the acceleration of the head is a predictor for the resulting maximum ball speed after head impact, but further investigations have to follow. Lastly, we confirmed the results that the head acceleration differs with the approach.
The core muscles play a central role in stabilizing the head during headers in soccer. The objective of this study was to examine the influence of a fatigued core musculature on the acceleration of the head during jump headers and run headers. Acceleration of the head was measured in a pre-post-design in 68 soccer players (age: 21.5 ± 3.8 years, height: 180.0 ± 13.9 cm, weight: 76.9 ± 8.1 kg). Data were recorded by means of a telemetric 3D acceleration sensor and with a pendulum header. The treatment encompassed two exercises each for the ventral, lateral, and dorsal muscle chains. The acceleration of the head between pre- and post-test was reduced by 0.3 G (p = 0.011) in jump headers and by 0.2 G (p = 0.067) in run headers. An additional analysis of all pretests showed an increased acceleration in run headers when compared to stand headers (p < 0.001) and jump headers (p < 0.001). No differences were found in the sub-group comparisons: semi-professional vs. recreational players, offensive vs. defensive players. Based on the results, we conclude that the acceleration of the head after fatiguing the core muscles does not increase, which stands in contrast to postulated expectations. More tests with accelerated soccer balls are required for a conclusive statement.
Adjustment Effects of Maximum Intensity Tolerance During Whole-Body Electromyostimulation Training
(2019)
Intensity regulation during whole-body electromyostimulation (WB-EMS) training is mostly controlled by subjective scales such as CR-10 Borg scale. To determine objective training intensities derived from a maximum as it is used in conventional strength training using the one-repetition-maximum (1-RM), a comparable maximum in WB-EMS is necessary. Therefore, the aim of this study was to examine, if there is an individual maximum intensity tolerance plateau after multiple consecutive EMS application sessions. A total of 52 subjects (24.1 ± 3.2 years; 76.8 ± 11.1 kg; 1.77 ± 0.09 m) participated in the longitudinal, observational study (38 males, 14 females). Each participant carried out four consecutive maximal EMS applications (T1–T4) separated by 1 week. All muscle groups were stimulated successively until their individual maximum and combined to a whole-body stimulation index to carry out a possible statement for the development of the maximum intensity tolerance of the whole body. There was a significant main effect between the measurement times for all participants (p < 0.001; ????2 = 0.39) as well as gender specific for males (p = 0.001; ????2 = 0.18) and females (p < 0.001; ????2 = 0.57). There were no interaction effects of gender × measurement time (p = 0.394). The maximum intensity tolerance increased significantly from T1 to T2 (p = 0.001) and T2 to T3 (p < 0.001). There was no significant difference between T3 and T4 (p = 1.0). These results indicate that there is an adjustment of the individual maximum intensity tolerance to a WB-EMS training after three consecutive tests. Therefore, there is a need of several habituation units comparable to the identification of the individual 1-RM in conventional strength training. Further research should focus on an objective intensity-specific regulation of the WB-EMS based on the individual maximum intensity tolerance to characterize different training areas and therefore generate specific adaptations to a WB-EMS training compared to conventional strength training methods.
Whole-body electromyostimulation (WB-EMS) is an extension of the EMS application known in physical therapy. In WB-EMS, body composition and skinfold thickness seem to play a decisive role in influencing the Ohmic resistance and therefore the maximum intensity tolerance. That is why the therapeutic success of (WB-)EMS may depend on individual anatomical parameters. The aim of the study was to find out whether gender, skinfold thickness and parameters of body composition have an influence on the maximum intensity tolerance in WB-EMS. [Participants and Methods] Fifty-two participants were included in the study. Body composition (body impedance, body fat, fat mass, fat-free mass) and skinfold thicknesses were measured and set into relation to the maximum intensity tolerance. [Results] No relationship between the different anthropometric parameters and the maximum intensity tolerance was detected for both genders. Considering the individual muscle groups, no similarities were found in the results. [Conclusion] Body composition or skinfold thickness do not seem to have any influence on the maximum intensity tolerance in WB-EMS training. For the application in physiotherapy this means that a dosage of the electrical voltage within the scope of a (WB-) EMS application is only possible via the subjective feedback (BORG Scale).
The difference in the efficacy of altered stimulation parameters in whole-body-electromyostimulation (WB-EMS) training remains largely unexplored. However, higher impulse frequencies (>50 Hz) might be most adequate for strength gain. The aim of this study was to analyze potential differences in sports-related performance parameters after a 10-week WB-EMS training with different frequencies. A total of 51 untrained participants (24.9 ± 3.9 years, 174 ± 9 cm, 72.4 ± 16.4 kg, BMI 23.8 ± 4.1, body fat 24.7 ± 8.1 %) was randomly divided into three groups: one inactive control group (CON) and two training groups. They completed a 10-week WB-EMS program of 1.5 sessions/week, equal content but different stimulation frequencies (training with 20 Hz (T20) vs. training with 85 Hz (T85)). Before and after intervention, all participants completed jumping (Counter Movement Jump (CMJ), Squat Jump (SJ), Drop Jump (DJ)), sprinting (5m, 10m, 30m), and strength tests (isometric trunk flexion/extension). One-way ANOVA was applied to calculate parameter changes. Post-hoc least significant difference tests were performed to identify group differences. Significant differences were identified for CMJ (p = 0.007), SJ (p = 0.022), trunk flexion (p = 0.020) and extension (p=.013) with significant group differences between both training groups and CON (not between the two training groups T20 and T85). A 10-week WB-EMS training leads to significant improvements of jump and strength parameters in untrained participants. No differences could be detected between the frequencies. Therefore, both stimulation frequencies can be regarded as adequate for increasing specific sport performance parameters. Further aspects as regeneration or long term effects by the use of different frequencies still need to be clarified.
The objectification of acute fatigue (during isometric muscle contraction) and cumulative fatigue (due to multiple intermittent isometric muscle contractions) plays an important role in sport climbing. The data of 42 participants were used in the study. Climbing performance was operationalized using maximal climbing-specific holding time (CSHT) by performing dead hangs. The test started with an initial measurement of handgrip strength (HGS) followed by three intermittent measurements of CSHT and HGS. During the test, finger flexor muscle oxygen saturation (SmO2) was measured using a near-infrared spectroscopy wearable biosensor. Significant reductions in CSHT and HGS could be found (p < 0.001), which indicates that the consecutive maximal isometric holding introduces cumulative fatigue. The reduction in CSHT did not correlate with a reduction in HGS over multiple consecutive maximal dead hangs (p > 0.35). Furthermore, there were no significant differences in initial SmO2 level, SmO2 level at termination, SmO2 recovery, and mean negative slope of the SmO2 saturation reduction between the different measurements (p > 0.24). Significant differences were found between pre-, termination-, and recovery- (10 s after termination) SmO2 levels (p < 0.001). Therefore, monitoring acute fatigue using athletes’ termination SmO2 saturation seems promising. By contrast, the measurement of HGS and muscle oxygen metabolism seems inappropriate for monitoring cumulative fatigue during intermittent isometric climbing-specific muscle contractions.
The present study aimed to assess the effects of asymmetric muscle fatigue on the skin surface temperature of abdominal and back muscles. The study was based on a pre-post/follow-up design with one group and included a total of 41 subjects (22 male, 19 female; age, 22.63 ± 3.91; weight, 71.89 ± 12.97 kg; height, 173.36 ± 9.95). All the participants were asked to perform side bends in sets of 20 repetitions on a Roman chair until complete exhaustion. The pre-, post- and follow-up test (24 h after) skin surface temperatures were recorded with infrared thermography. Subjective muscle soreness and muscle fatigue were analyzed using two questionnaires. The results of the post hoc tests showed that skin temperature was statistically significantly lower in the post-tests than in the pre- and follow-up tests, but no meaningful differences existed between the pre- and follow-up tests. Asymmetric side differences were found in the post-test for the upper and lower areas of the back. Differences were also noted for the front in both the upper and lower areas. No thermographic side asymmetries were found at the pre- or follow-up measurement for either the back or the front. Our results support the potential of using thermographic skin surface temperature to monitor exercise and recovery in athletes, as well as its use in rehabilitational exercise selection.
Clinical classification models are mostly pathology-dependent and, thus, are only able to detect pathologies they have been trained for. Research is needed regarding pathology-independent classifiers and their interpretation. Hence, our aim is to develop a pathology-independent classifier that provides prediction probabilities and explanations of the classification decisions. Spinal posture data of healthy subjects and various pathologies (back pain, spinal fusion, osteoarthritis), as well as synthetic data, were used for modeling. A one-class support vector machine was used as a pathology-independent classifier. The outputs were transformed into a probability distribution according to Platt’s method. Interpretation was performed using the explainable artificial intelligence tool Local Interpretable Model-Agnostic Explanations. The results were compared with those obtained by commonly used binary classification approaches. The best classification results were obtained for subjects with a spinal fusion. Subjects with back pain were especially challenging to distinguish from the healthy reference group. The proposed method proved useful for the interpretation of the predictions. No clear inferiority of the proposed approach compared to commonly used binary classifiers was demonstrated. The application of dynamic spinal data seems important for future works. The proposed approach could be useful to provide an objective orientation and to individually adapt and monitor therapy measures pre- and post-operatively.
Clinical classification models are mostly pathology-dependent and, thus, are only able to
detect pathologies they have been trained for. Research is needed regarding pathology-independent
classifiers and their interpretation. Hence, our aim is to develop a pathology-independent classifier
that provides prediction probabilities and explanations of the classification decisions. Spinal posture
data of healthy subjects and various pathologies (back pain, spinal fusion, osteoarthritis), as
well as synthetic data, were used for modeling. A one-class support vector machine was used as a
pathology-independent classifier. The outputs were transformed into a probability distribution according
to Platt’s method. Interpretation was performed using the explainable artificial intelligence
tool Local Interpretable Model-Agnostic Explanations. The results were compared with those obtained
by commonly used binary classification approaches. The best classification results were obtained
for subjects with a spinal fusion. Subjects with back pain were especially challenging to distinguish
from the healthy reference group. The proposed method proved useful for the interpretation
of the predictions. No clear inferiority of the proposed approach compared to commonly used
binary classifiers was demonstrated. The application of dynamic spinal data seems important for
future works. The proposed approach could be useful to provide an objective orientation and to
individually adapt and monitor therapy measures pre- and post-operatively.