Refine
Document Type
- Article (15) (remove)
Language
- English (15)
Has Fulltext
- yes (15)
Keywords
Faculty / Organisational entity
Magnetic heterostructures consisting of single-crystal yttrium iron garnet (YIG) films coated with platinum are widely used in spin-wave experiments related to spintronic phenomena such as the spin-transfer-torque, spin-Hall, and spin-Seebeck effects. However, spin waves in YIG/Pt bilayers experience much stronger attenuation than in bare YIG films. For micrometer-thick YIG films, this effect is caused by microwave eddy currents in the Pt layer. This paper reports that by employing an excitation configuration in which the YIG film faces the metal plate of the microstrip antenna structure, the eddy currents in Pt are shunted and the transmission of the Damon–Eschbach surface spin wave is greatly improved. The reduction in spin-wave attenuation persists even when the Pt coating is separated from the ground plate by a thin dielectric layer. This makes the proposed excitation configuration suitable for injection of an electric current into the Pt layer and thus for application in spintronics devices. The theoretical analysis carried out within the framework of the electrodynamic approach reveals how the platinum nanolayer and the nearby highly conductive metal plate affect the group velocity and the lifetime of the Damon–Eshbach surface wave and how these two wavelength-dependent quantities determine the transmission characteristics of the spin-wave device.
Herein, experimental demonstration of the parallel parametric generation of spin waves in a microscaled yttrium iron garnet waveguide with nanoscale thickness is presented. Using Brillouin light scattering microscopy, the parametric excitation of the first and second waveguide modes by a stripline microwave pumping source is observed. Micromagnetic simulations reveal the wave vector of the parametrically generated spin waves. Based on analytical calculations, which are in excellent agreement with experiments and simulations, it is proved that the spin-wave radiation losses are the determinative term of the parametric instability threshold in this miniaturized system. The used method enables the direct excitation and amplification of nanometer spin waves dominated by exchange interactions. The presented results pave the way for integrated magnonics based on insulating nanomagnets.
The emerging field of magnonics uses spin waves and their quanta, magnons, to implement wave-based computing on the micro- and nanoscale. Multifrequency magnon networks would allow for parallel data processing within single logic elements, whereas this is not the case with conventional transistor-based electronic logic. However, a lack of experimentally proven solutions to efficiently combine and separate magnons of different frequencies has impeded the intensive use of this concept. Herein, the experimental realization of a spin-wave demultiplexer enabling frequency-dependent separation of magnonic signals in the gigahertz range is demonstrated. The device is based on 2D magnon trans- port in the form of spin-wave beams in unpatterned magnetic films. The intrinsic frequency dependence of the beam direction is exploited to realize a passive functioning obviating an external control and additional power consumption. This approach paves the way to magnonic multiplexing circuits enabling simultaneous information transport and processing.
Low damping magnetic properties and perpendicular magnetic anisotropy in the Heusler alloy Fe1.5CoGe
(2019)
We present a study of the dynamic magnetic properties of TiN-buffered epitaxial thin films of the Heusler alloy Fe1.5CoGe. Thickness series annealed at different temperatures are prepared and the magnetic damping is measured, a lowest value of α = 2.18 × 10−3 is obtained. The perpendicular magnetic anisotropy properties in Fe1.5CoGe/MgO are also characterized. The evolution of the interfacial perpendicular anisotropy constant K⊥S with the annealing temperature is shown and compared with the widely used CoFeB/MgO interface. A large volume contribution to the perpendicular anisotropy of (4.3 ± 0.5) × 105 J/m3 is also found, in contrast with vanishing bulk contribution in common Co- and Fe-based Heusler alloys.
The static and spin wave properties of regular square lattices of magnetic dots of 0.5-2 microm dot diameter and 1-4 microm periodicity patterned in permalloy films have been investigated by Brillouin light scattering. The samples have been structured using x-ray lithography and ion beam etching. The Brillouin light scattering spectra reveal both surface and bulk spin wave modes. The spin wave frequencies can be well described taking into account the demagnetization factor of each single dot. For the samples with smallest dot separation of 0.1 microm a fourfold in-plane magnetic anisotropy with the easy axis directed along the pattern diagonal is observed, indicating anisotropic coupling between the dots.
A computer control for a Sandercock-type multipath tandem Fabry-Perot interferometer is described, which offers many advantages over conventionally used analog control: The range of stability is increased due to active control of the laser light intensity and the mirror dither amplitude. The alignment is fully automated enabling start of a measurement within a minute after start of align, including optionally finding the optimum focus on the sample. The software control enables a programmable series of measurements with control of, e.g., the position and rotation of the sample, the angle of light incidence, the sample temperature, or the strength and direction of an applied magnetic field. Built-in fitting routines allow for a precise determination of frequency positions of excitation peaks combined with increased frequency accuracy due to a correction of a residual nonlinearity of the mirror stage drive.
Mn-Si-C alloy films are prepared by e-beam coevaporation onto a Si substrate held at 600 °C. Ferromagnetism is observed below T = (360 +/- 5) K with SQUID magnetometry and magneto-optical Kerr effect. This is the highest Curie temperature T yet observed for a Mn-based alloy. Although the composition determined by Auger depth profiling varies appreciably for different films, their T is the same indicating that ferromagnetism is caused by an alloy of well-defined composition independent of precipitations.
Static and dynamic properties of patterned magnetic permalloy films are investigated. In square lattices of circular shaped permalloy dots an anisotropic coupling mechanism has been found, which is identified as being due to intrinsically unsaturated parts of the dots caused by spatial variations of demagnetizing field. In arrays of magnetic wires a quantization of the surface spin wave mode in several dispersionless modes is observed and quantitatively described. For large wavevectors the frequency separation between the modes becomes smaller and the frequencies converge to the dispersion of the dipole-exchange surface mode of a continuous film.
Epitaxial growth of metastable Pd(001) at high deposition temperatures up to a critical thickness of 6 monolayers on bcc-Fe(001) is reported, the critical thickness being depending dramatically on the deposition temperature. For larger thicknesses the Pd film undergoes a roughening transition with strain relaxation by forming a top polycrystalline layer. These results allow to make a correlation between previ-ously reported unusual magnetic properties of Fe/Pd double layers and the crystallographic structure of the Pd overlayer.
We investigate the temperature dependence of the magnetization reversal process and of spinwaves in epi-taxially grown (001)-oriented [Fem/Aun]30 multilayers (m = 1, 2; n = 1- 6). Both polar magneto-optic Kerrr effect and Brillouin light scattering measurements reveal that all investigated multilayers, apart from the [Fe2/Au1]30-sample, are magnetized perpendicular to the film plane. The out-of-plane anisotropy constants are obtained. At high temperature, the magnetization curves are well described by an alternating stripe domain structure with free mobile domain walls, and at low temperature by a thermal activation model for the domain wall motion.